[v2,6/7] CMDLINE: mips: convert to generic builtin command line
diff mbox series

Message ID 20210309000247.2989531-7-danielwa@cisco.com
State New, archived
Headers show
Series
  • Untitled series #488331
Related show

Commit Message

Daniel Walker March 9, 2021, 12:02 a.m. UTC
This updates the mips code to use the CONFIG_GENERIC_CMDLINE
option.

This deletes the option for MIPS_CMDLINE_BUILTIN_EXTEND
and replaces the functionality with generic code.

Cc: xe-linux-external@cisco.com
Signed-off-by: Ruslan Ruslichenko <rruslich@cisco.com>
Signed-off-by: Ruslan Bilovol <rbilovol@cisco.com>
Signed-off-by: Daniel Walker <danielwa@cisco.com>
---
 arch/mips/Kconfig        |  4 +---
 arch/mips/Kconfig.debug  | 44 ----------------------------------------
 arch/mips/kernel/setup.c | 36 ++++----------------------------
 3 files changed, 5 insertions(+), 79 deletions(-)

Patch
diff mbox series

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 0a17bedf4f0d..7c07b3bca9fc 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -23,6 +23,7 @@  config MIPS
 	select CPU_NO_EFFICIENT_FFS if (TARGET_ISA_REV < 1)
 	select CPU_PM if CPU_IDLE
 	select GENERIC_ATOMIC64 if !64BIT
+	select GENERIC_CMDLINE
 	select GENERIC_CMOS_UPDATE
 	select GENERIC_CPU_AUTOPROBE
 	select GENERIC_GETTIMEOFDAY
@@ -3171,9 +3172,6 @@  choice
 	config MIPS_CMDLINE_FROM_BOOTLOADER
 		bool "Bootloader kernel arguments if available"
 
-	config MIPS_CMDLINE_BUILTIN_EXTEND
-		depends on CMDLINE_BOOL
-		bool "Extend builtin kernel arguments with bootloader arguments"
 endchoice
 
 endmenu
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 7a8d94cdd493..b5a099c74eb6 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -30,50 +30,6 @@  config EARLY_PRINTK_8250
 config USE_GENERIC_EARLY_PRINTK_8250
 	bool
 
-config CMDLINE_BOOL
-	bool "Built-in kernel command line"
-	help
-	  For most systems, it is firmware or second stage bootloader that
-	  by default specifies the kernel command line options.  However,
-	  it might be necessary or advantageous to either override the
-	  default kernel command line or add a few extra options to it.
-	  For such cases, this option allows you to hardcode your own
-	  command line options directly into the kernel.  For that, you
-	  should choose 'Y' here, and fill in the extra boot arguments
-	  in CONFIG_CMDLINE.
-
-	  The built-in options will be concatenated to the default command
-	  line if CMDLINE_OVERRIDE is set to 'N'. Otherwise, the default
-	  command line will be ignored and replaced by the built-in string.
-
-	  Most MIPS systems will normally expect 'N' here and rely upon
-	  the command line from the firmware or the second-stage bootloader.
-
-config CMDLINE
-	string "Default kernel command string"
-	depends on CMDLINE_BOOL
-	help
-	  On some platforms, there is currently no way for the boot loader to
-	  pass arguments to the kernel.  For these platforms, and for the cases
-	  when you want to add some extra options to the command line or ignore
-	  the default command line, you can supply some command-line options at
-	  build time by entering them here.  In other cases you can specify
-	  kernel args so that you don't have to set them up in board prom
-	  initialization routines.
-
-	  For more information, see the CMDLINE_BOOL and CMDLINE_OVERRIDE
-	  options.
-
-config CMDLINE_OVERRIDE
-	bool "Built-in command line overrides firmware arguments"
-	depends on CMDLINE_BOOL
-	help
-	  By setting this option to 'Y' you will have your kernel ignore
-	  command line arguments from firmware or second stage bootloader.
-	  Instead, the built-in command line will be used exclusively.
-
-	  Normally, you will choose 'N' here.
-
 config SB1XXX_CORELIS
 	bool "Corelis Debugger"
 	depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 7e1f8e277437..8ce763e03792 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -23,6 +23,7 @@ 
 #include <linux/debugfs.h>
 #include <linux/kexec.h>
 #include <linux/sizes.h>
+#include <linux/cmdline.h>
 #include <linux/device.h>
 #include <linux/dma-map-ops.h>
 #include <linux/decompress/generic.h>
@@ -67,12 +68,6 @@  EXPORT_SYMBOL(mips_machtype);
 static char __initdata command_line[COMMAND_LINE_SIZE];
 char __initdata arcs_cmdline[COMMAND_LINE_SIZE];
 
-#ifdef CONFIG_CMDLINE_BOOL
-static const char builtin_cmdline[] __initconst = CONFIG_CMDLINE;
-#else
-static const char builtin_cmdline[] __initconst = "";
-#endif
-
 /*
  * mips_io_port_base is the begin of the address space to which x86 style
  * I/O ports are mapped.
@@ -546,27 +541,7 @@  static void __init bootcmdline_init(void)
 {
 	bool dt_bootargs = false;
 
-	/*
-	 * If CMDLINE_OVERRIDE is enabled then initializing the command line is
-	 * trivial - we simply use the built-in command line unconditionally &
-	 * unmodified.
-	 */
-	if (IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) {
-		strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-		return;
-	}
-
-	/*
-	 * If the user specified a built-in command line &
-	 * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is
-	 * prepended to arguments from the bootloader or DT so we'll copy them
-	 * to the start of boot_command_line here. Otherwise, empty
-	 * boot_command_line to undo anything early_init_dt_scan_chosen() did.
-	 */
-	if (IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND))
-		strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-	else
-		boot_command_line[0] = 0;
+	boot_command_line[0] = 0;
 
 #ifdef CONFIG_OF_EARLY_FLATTREE
 	/*
@@ -589,12 +564,9 @@  static void __init bootcmdline_init(void)
 		bootcmdline_append(arcs_cmdline, COMMAND_LINE_SIZE);
 
 	/*
-	 * If the user specified a built-in command line & we didn't already
-	 * prepend it, we append it to boot_command_line here.
+	 * Use the generic system for builtin prepend and append.
 	 */
-	if (IS_ENABLED(CONFIG_CMDLINE_BOOL) &&
-	    !IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND))
-		bootcmdline_append(builtin_cmdline, COMMAND_LINE_SIZE);
+	cmdline_add_builtin(boot_command_line, NULL, COMMAND_LINE_SIZE);
 }
 
 /*