From: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
linux-bluetooth@vger.kernel.org, hemantg@codeaurora.org,
linux-arm-msm@vger.kernel.org, bgodavar@codeaurora.org,
rjliao@codeaurora.org, hbandi@codeaurora.org,
abhishekpandit@chromium.org,
Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Subject: [RFC PATCH v2] Bluetooth: hci_qca: Add device_may_wakeup support
Date: Thu, 11 Mar 2021 12:33:40 +0530 [thread overview]
Message-ID: <1615446220-969-1-git-send-email-gubbaven@codeaurora.org> (raw)
Based on device may wakeup status, Bluez stack will enable/disable
passive scanning with whitelist in BT controller while suspending.
As interrupt from BT SoC is handled by UART driver,we need to use
device handle of UART driver to get the status of device may wakeup
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
---
drivers/bluetooth/hci_qca.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index de36af6..73af901 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1571,6 +1571,20 @@ static void qca_cmd_timeout(struct hci_dev *hdev)
mutex_unlock(&qca->hci_memdump_lock);
}
+static bool qca_prevent_wake(struct hci_dev *hdev)
+{
+ struct hci_uart *hu = hci_get_drvdata(hdev);
+ bool wakeup;
+
+ /* UART driver handles the interrupt from BT SoC.So we need to use
+ * device handle of UART driver to get the status of device may wakeup.
+ */
+ wakeup = device_may_wakeup(hu->serdev->ctrl->dev.parent);
+ bt_dev_dbg(hu->hdev, "wakeup status : %d", wakeup);
+
+ return !wakeup;
+}
+
static int qca_wcn3990_init(struct hci_uart *hu)
{
struct qca_serdev *qcadev;
@@ -1721,6 +1735,7 @@ static int qca_setup(struct hci_uart *hu)
qca_debugfs_init(hdev);
hu->hdev->hw_error = qca_hw_error;
hu->hdev->cmd_timeout = qca_cmd_timeout;
+ hu->hdev->prevent_wake = qca_prevent_wake;
} else if (ret == -ENOENT) {
/* No patch/nvm-config found, run with original fw/config */
set_bit(QCA_ROM_FW, &qca->flags);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next reply other threads:[~2021-03-11 7:05 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-11 7:03 Venkata Lakshmi Narayana Gubba [this message]
2021-03-11 10:49 ` [RFC PATCH v2] Bluetooth: hci_qca: Add device_may_wakeup support Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1615446220-969-1-git-send-email-gubbaven@codeaurora.org \
--to=gubbaven@codeaurora.org \
--cc=abhishekpandit@chromium.org \
--cc=bgodavar@codeaurora.org \
--cc=hbandi@codeaurora.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mka@chromium.org \
--cc=rjliao@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).