From: Jan Kiszka <jan.kiszka@siemens.com>
To: Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Le Jin <le.jin@siemens.com>,
Bao Cheng Su <baocheng.su@siemens.com>,
Vignesh Raghavendra <vigneshr@ti.com>
Subject: [PATCH v5 3/3] arm64: dts: ti: Add support for Siemens IOT2050 boards
Date: Thu, 11 Mar 2021 15:33:43 +0100 [thread overview]
Message-ID: <4fb05969102d14d230e03ca4312ef9706efa61e6.1615473223.git.jan.kiszka@siemens.com> (raw)
In-Reply-To: <cover.1615473223.git.jan.kiszka@siemens.com>
From: Jan Kiszka <jan.kiszka@siemens.com>
Add support for two Siemens SIMATIC IOT2050 variants, Basic and
Advanced. They are based on the TI AM6528 GP and AM6548 SOCs HS, thus
differ in their number of cores and availability of security features.
Furthermore the Advanced version comes with more RAM, an eMMC and a few
internal differences.
Based on original version by Le Jin.
Link: https://new.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
Link: https://github.com/siemens/meta-iot2050
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
---
arch/arm64/boot/dts/ti/Makefile | 2 +
.../boot/dts/ti/k3-am65-iot2050-common.dtsi | 655 ++++++++++++++++++
.../boot/dts/ti/k3-am6528-iot2050-basic.dts | 61 ++
.../dts/ti/k3-am6548-iot2050-advanced.dts | 60 ++
4 files changed, 778 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
create mode 100644 arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 386ef98ccf7d..d56c742f5a10 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -7,6 +7,8 @@
#
dtb-$(CONFIG_ARCH_K3) += k3-am654-base-board.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6528-iot2050-basic.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6548-iot2050-advanced.dtb
dtb-$(CONFIG_ARCH_K3) += k3-j721e-common-proc-board.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
new file mode 100644
index 000000000000..de763ca9251c
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -0,0 +1,655 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ * Le Jin <le.jin@siemens.com>
+ * Jan Kiszka <jan.kiszk@siemens.com>
+ *
+ * Common bits of the IOT2050 Basic and Advanced variants
+ */
+
+/dts-v1/;
+
+#include "k3-am654.dtsi"
+#include <dt-bindings/phy/phy.h>
+
+/ {
+ aliases {
+ spi0 = &mcu_spi0;
+ };
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ bootargs = "earlycon=ns16550a,mmio32,0x02810000";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ secure_ddr: secure-ddr@9e800000 {
+ reg = <0 0x9e800000 0 0x01800000>; /* for OP-TEE */
+ alignment = <0x1000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa0000000 0 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa0100000 0 0xf00000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa1000000 0 0x100000>;
+ no-map;
+ };
+
+ mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
+ compatible = "shared-dma-pool";
+ reg = <0 0xa1100000 0 0xf00000>;
+ no-map;
+ };
+
+ rtos_ipc_memory_region: ipc-memories@a2000000 {
+ reg = <0x00 0xa2000000 0x00 0x00200000>;
+ alignment = <0x1000>;
+ no-map;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins_default>;
+
+ status-led-red {
+ gpios = <&wkup_gpio0 32 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ };
+
+ status-led-green {
+ gpios = <&wkup_gpio0 24 GPIO_ACTIVE_HIGH>;
+ };
+
+ user-led1-red {
+ gpios = <&pcal9535_3 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ user-led1-green {
+ gpios = <&pcal9535_2 15 GPIO_ACTIVE_HIGH>;
+ };
+
+ user-led2-red {
+ gpios = <&wkup_gpio0 17 GPIO_ACTIVE_HIGH>;
+ };
+
+ user-led2-green {
+ gpios = <&wkup_gpio0 22 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ dp_refclk: clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+};
+
+&wkup_pmx0 {
+ wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+ pinctrl-single,pins = <
+ /* (AC7) WKUP_I2C0_SCL */
+ AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0)
+ /* (AD6) WKUP_I2C0_SDA */
+ AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0)
+ >;
+ };
+
+ mcu_i2c0_pins_default: mcu-i2c0-pins-default {
+ pinctrl-single,pins = <
+ /* (AD8) MCU_I2C0_SCL */
+ AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0)
+ /* (AD7) MCU_I2C0_SDA */
+ AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT, 0)
+ >;
+ };
+
+ arduino_i2c_aio_switch_pins_default: arduino-i2c-aio-switch-pins-default {
+ pinctrl-single,pins = <
+ /* (R2) WKUP_GPIO0_21 */
+ AM65X_WKUP_IOPAD(0x0024, PIN_OUTPUT, 7)
+ >;
+ };
+
+ push_button_pins_default: push-button-pins-default {
+ pinctrl-single,pins = <
+ /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
+ AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7)
+ >;
+ };
+
+ arduino_uart_pins_default: arduino-uart-pins-default {
+ pinctrl-single,pins = <
+ /* (P4) MCU_UART0_RXD */
+ AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4)
+ /* (P5) MCU_UART0_TXD */
+ AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4)
+ >;
+ };
+
+ arduino_io_d2_to_d3_pins_default: arduino-io-d2-to-d3-pins-default {
+ pinctrl-single,pins = <
+ /* (P1) WKUP_GPIO0_31 */
+ AM65X_WKUP_IOPAD(0x004C, PIN_OUTPUT, 7)
+ /* (N3) WKUP_GPIO0_33 */
+ AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 7)
+ >;
+ };
+
+ arduino_io_oe_pins_default: arduino-io-oe-pins-default {
+ pinctrl-single,pins = <
+ /* (N4) WKUP_GPIO0_34 */
+ AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 7)
+ /* (M2) WKUP_GPIO0_36 */
+ AM65X_WKUP_IOPAD(0x0060, PIN_OUTPUT, 7)
+ /* (M3) WKUP_GPIO0_37 */
+ AM65X_WKUP_IOPAD(0x0064, PIN_OUTPUT, 7)
+ /* (M4) WKUP_GPIO0_38 */
+ AM65X_WKUP_IOPAD(0x0068, PIN_OUTPUT, 7)
+ /* (M1) WKUP_GPIO0_41 */
+ AM65X_WKUP_IOPAD(0x0074, PIN_OUTPUT, 7)
+ >;
+ };
+
+ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+ pinctrl-single,pins = <
+ /* (V1) MCU_OSPI0_CLK */
+ AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0)
+ /* (U2) MCU_OSPI0_DQS */
+ AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0)
+ /* (U4) MCU_OSPI0_D0 */
+ AM65X_WKUP_IOPAD(0x000c, PIN_INPUT, 0)
+ /* (U5) MCU_OSPI0_D1 */
+ AM65X_WKUP_IOPAD(0x0010, PIN_INPUT, 0)
+ /* (R4) MCU_OSPI0_CSn0 */
+ AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0)
+ >;
+ };
+
+ db9_com_mode_pins_default: db9-com-mode-pins-default {
+ pinctrl-single,pins = <
+ /* (AD3) WKUP_GPIO0_5, used as uart0 mode 0 */
+ AM65X_WKUP_IOPAD(0x00c4, PIN_OUTPUT, 7)
+ /* (AC3) WKUP_GPIO0_4, used as uart0 mode 1 */
+ AM65X_WKUP_IOPAD(0x00c0, PIN_OUTPUT, 7)
+ /* (AC1) WKUP_GPIO0_7, used as uart0 term */
+ AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 7)
+ /* (AC2) WKUP_GPIO0_6, used as uart0 en */
+ AM65X_WKUP_IOPAD(0x00c8, PIN_OUTPUT, 7)
+ >;
+ };
+
+ leds_pins_default: leds-pins-default {
+ pinctrl-single,pins = <
+ /* (T2) WKUP_GPIO0_17, used as user led1 red */
+ AM65X_WKUP_IOPAD(0x0014, PIN_OUTPUT, 7)
+ /* (R3) WKUP_GPIO0_22, used as user led1 green */
+ AM65X_WKUP_IOPAD(0x0028, PIN_OUTPUT, 7)
+ /* (R5) WKUP_GPIO0_24, used as status led red */
+ AM65X_WKUP_IOPAD(0x0030, PIN_OUTPUT, 7)
+ /* (N2) WKUP_GPIO0_32, used as status led green */
+ AM65X_WKUP_IOPAD(0x0050, PIN_OUTPUT, 7)
+ >;
+ };
+
+ mcu_spi0_pins_default: mcu-spi0-pins-default {
+ pinctrl-single,pins = <
+ /* (Y1) MCU_SPI0_CLK */
+ AM65X_WKUP_IOPAD(0x0090, PIN_INPUT, 0)
+ /* (Y3) MCU_SPI0_D0 */
+ AM65X_WKUP_IOPAD(0x0094, PIN_INPUT, 0)
+ /* (Y2) MCU_SPI0_D1 */
+ AM65X_WKUP_IOPAD(0x0098, PIN_INPUT, 0)
+ /* (Y4) MCU_SPI0_CS0 */
+ AM65X_WKUP_IOPAD(0x009c, PIN_OUTPUT, 0)
+ >;
+ };
+
+ minipcie_pins_default: minipcie-pins-default {
+ pinctrl-single,pins = <
+ /* (P2) MCU_OSPI1_DQS.WKUP_GPIO0_27 */
+ AM65X_WKUP_IOPAD(0x003C, PIN_OUTPUT, 7)
+ >;
+ };
+};
+
+&main_pmx0 {
+ main_uart1_pins_default: main-uart1-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0174, PIN_INPUT, 6) /* (AE23) UART1_RXD */
+ AM65X_IOPAD(0x014c, PIN_OUTPUT, 6) /* (AD23) UART1_TXD */
+ AM65X_IOPAD(0x0178, PIN_INPUT, 6) /* (AD22) UART1_CTSn */
+ AM65X_IOPAD(0x017c, PIN_OUTPUT, 6) /* (AC21) UART1_RTSn */
+ >;
+ };
+
+ main_i2c3_pins_default: main-i2c3-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x01c0, PIN_INPUT, 2) /* (AF13) I2C3_SCL */
+ AM65X_IOPAD(0x01d4, PIN_INPUT, 2) /* (AG12) I2C3_SDA */
+ >;
+ };
+
+ main_mmc1_pins_default: main-mmc1-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
+ AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
+ AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */
+ AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */
+ AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */
+ AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */
+ AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */
+ AM65X_IOPAD(0x02e0, PIN_INPUT_PULLUP, 0) /* (C24) MMC1_SDWP */
+ >;
+ };
+
+ usb0_pins_default: usb0-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x02bc, PIN_OUTPUT, 0) /* (AD9) USB0_DRVVBUS */
+ >;
+ };
+
+ usb1_pins_default: usb1-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
+ >;
+ };
+
+ arduino_io_d4_to_d9_pins_default: arduino-io-d4-to-d9-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0084, PIN_OUTPUT, 7) /* (AG18) GPIO0_33 */
+ AM65X_IOPAD(0x008C, PIN_OUTPUT, 7) /* (AF17) GPIO0_35 */
+ AM65X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (AH16) GPIO0_38 */
+ AM65X_IOPAD(0x00AC, PIN_OUTPUT, 7) /* (AH15) GPIO0_43 */
+ AM65X_IOPAD(0x00C0, PIN_OUTPUT, 7) /* (AG15) GPIO0_48 */
+ AM65X_IOPAD(0x00CC, PIN_OUTPUT, 7) /* (AD15) GPIO0_51 */
+ >;
+ };
+
+ dss_vout1_pins_default: dss-vout1-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0000, PIN_OUTPUT, 1) /* VOUT1_DATA0 */
+ AM65X_IOPAD(0x0004, PIN_OUTPUT, 1) /* VOUT1_DATA1 */
+ AM65X_IOPAD(0x0008, PIN_OUTPUT, 1) /* VOUT1_DATA2 */
+ AM65X_IOPAD(0x000c, PIN_OUTPUT, 1) /* VOUT1_DATA3 */
+ AM65X_IOPAD(0x0010, PIN_OUTPUT, 1) /* VOUT1_DATA4 */
+ AM65X_IOPAD(0x0014, PIN_OUTPUT, 1) /* VOUT1_DATA5 */
+ AM65X_IOPAD(0x0018, PIN_OUTPUT, 1) /* VOUT1_DATA6 */
+ AM65X_IOPAD(0x001c, PIN_OUTPUT, 1) /* VOUT1_DATA7 */
+ AM65X_IOPAD(0x0020, PIN_OUTPUT, 1) /* VOUT1_DATA8 */
+ AM65X_IOPAD(0x0024, PIN_OUTPUT, 1) /* VOUT1_DATA9 */
+ AM65X_IOPAD(0x0028, PIN_OUTPUT, 1) /* VOUT1_DATA10 */
+ AM65X_IOPAD(0x002c, PIN_OUTPUT, 1) /* VOUT1_DATA11 */
+ AM65X_IOPAD(0x0030, PIN_OUTPUT, 1) /* VOUT1_DATA12 */
+ AM65X_IOPAD(0x0034, PIN_OUTPUT, 1) /* VOUT1_DATA13 */
+ AM65X_IOPAD(0x0038, PIN_OUTPUT, 1) /* VOUT1_DATA14 */
+ AM65X_IOPAD(0x003c, PIN_OUTPUT, 1) /* VOUT1_DATA15 */
+ AM65X_IOPAD(0x0040, PIN_OUTPUT, 1) /* VOUT1_DATA16 */
+ AM65X_IOPAD(0x0044, PIN_OUTPUT, 1) /* VOUT1_DATA17 */
+ AM65X_IOPAD(0x0048, PIN_OUTPUT, 1) /* VOUT1_DATA18 */
+ AM65X_IOPAD(0x004c, PIN_OUTPUT, 1) /* VOUT1_DATA19 */
+ AM65X_IOPAD(0x0050, PIN_OUTPUT, 1) /* VOUT1_DATA20 */
+ AM65X_IOPAD(0x0054, PIN_OUTPUT, 1) /* VOUT1_DATA21 */
+ AM65X_IOPAD(0x0058, PIN_OUTPUT, 1) /* VOUT1_DATA22 */
+ AM65X_IOPAD(0x005c, PIN_OUTPUT, 1) /* VOUT1_DATA23 */
+ AM65X_IOPAD(0x0060, PIN_OUTPUT, 1) /* VOUT1_VSYNC */
+ AM65X_IOPAD(0x0064, PIN_OUTPUT, 1) /* VOUT1_HSYNC */
+ AM65X_IOPAD(0x0068, PIN_OUTPUT, 1) /* VOUT1_PCLK */
+ AM65X_IOPAD(0x006c, PIN_OUTPUT, 1) /* VOUT1_DE */
+ >;
+ };
+
+ dp_pins_default: dp-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AF18) DP rst_n */
+ >;
+ };
+
+ main_i2c2_pins_default: main-i2c2-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) I2C2_SCL */
+ AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) I2C2_SDA */
+ >;
+ };
+};
+
+&main_pmx1 {
+ main_i2c0_pins_default: main-i2c0-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */
+ AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */
+ >;
+ };
+
+ main_i2c1_pins_default: main-i2c1-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */
+ AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */
+ >;
+ };
+
+ ecap0_pins_default: ecap0-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */
+ >;
+ };
+};
+
+&wkup_uart0 {
+ /* Wakeup UART is used by System firmware */
+ status = "reserved";
+};
+
+&main_uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_uart1_pins_default>;
+};
+
+&main_uart2 {
+ status = "disabled";
+};
+
+&mcu_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&arduino_uart_pins_default>;
+};
+
+&main_gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&arduino_io_d4_to_d9_pins_default>;
+ gpio-line-names =
+ "main_gpio0-base", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "", "",
+ "", "", "", "IO4", "", "IO5", "", "", "IO6", "",
+ "", "", "", "IO7", "", "", "", "", "IO8", "",
+ "", "IO9";
+};
+
+&wkup_gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &arduino_io_d2_to_d3_pins_default
+ &arduino_i2c_aio_switch_pins_default
+ &arduino_io_oe_pins_default
+ &push_button_pins_default
+ &db9_com_mode_pins_default
+ >;
+ gpio-line-names =
+ /* 0..9 */
+ "wkup_gpio0-base", "", "", "", "UART0-mode1", "UART0-mode0",
+ "UART0-enable", "UART0-terminate", "", "WIFI-disable",
+ /* 10..19 */
+ "", "", "", "", "", "", "", "", "", "",
+ /* 20..29 */
+ "", "A4A5-I2C-mux", "", "", "", "USER-button", "", "", "","IO0",
+ /* 30..39 */
+ "IO1", "IO2", "", "IO3", "IO17-direction", "A5",
+ "IO16-direction", "IO15-direction", "IO14-direction", "A3",
+ /* 40..49 */
+ "", "IO18-direction", "A4", "A2", "A1", "A0", "", "", "IO13",
+ "IO11",
+ /* 50..51 */
+ "IO12", "IO10";
+};
+
+&wkup_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wkup_i2c0_pins_default>;
+ clock-frequency = <400000>;
+};
+
+&mcu_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_i2c0_pins_default>;
+ clock-frequency = <400000>;
+
+ psu: regulator@60 {
+ compatible = "ti,tps62363";
+ reg = <0x60>;
+ regulator-name = "tps62363-vout";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ ti,vsel0-state-high;
+ ti,vsel1-state-high;
+ ti,enable-vout-discharge;
+ };
+
+ /* D4200 */
+ pcal9535_1: gpio@20 {
+ compatible = "nxp,pcal9535";
+ reg = <0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-line-names =
+ "A0-pull", "A1-pull", "A2-pull", "A3-pull", "A4-pull",
+ "A5-pull", "", "",
+ "IO14-enable", "IO15-enable", "IO16-enable",
+ "IO17-enable", "IO18-enable", "IO19-enable";
+ };
+
+ /* D4201 */
+ pcal9535_2: gpio@21 {
+ compatible = "nxp,pcal9535";
+ reg = <0x21>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-line-names =
+ "IO0-direction", "IO1-direction", "IO2-direction",
+ "IO3-direction", "IO4-direction", "IO5-direction",
+ "IO6-direction", "IO7-direction",
+ "IO8-direction", "IO9-direction", "IO10-direction",
+ "IO11-direction", "IO12-direction", "IO13-direction",
+ "IO19-direction";
+ };
+
+ /* D4202 */
+ pcal9535_3: gpio@25 {
+ compatible = "nxp,pcal9535";
+ reg = <0x25>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-line-names =
+ "IO0-pull", "IO1-pull", "IO2-pull", "IO3-pull",
+ "IO4-pull", "IO5-pull", "IO6-pull", "IO7-pull",
+ "IO8-pull", "IO9-pull", "IO10-pull", "IO11-pull",
+ "IO12-pull", "IO13-pull";
+ };
+};
+
+&main_i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c0_pins_default>;
+ clock-frequency = <400000>;
+
+ rtc: rtc8564@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ eeprom: eeprom@54 {
+ compatible = "atmel,24c08";
+ reg = <0x54>;
+ pagesize = <16>;
+ };
+};
+
+&main_i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c1_pins_default>;
+ clock-frequency = <400000>;
+};
+
+&main_i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c2_pins_default>;
+ clock-frequency = <400000>;
+};
+
+&main_i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_i2c3_pins_default>;
+ clock-frequency = <400000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ edp-bridge@f {
+ compatible = "toshiba,tc358767";
+ reg = <0x0f>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_pins_default>;
+ reset-gpios = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
+
+ clock-names = "ref";
+ clocks = <&dp_refclk>;
+
+ toshiba,hpd-pin = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ bridge_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+ };
+ };
+};
+
+&mcu_cpsw {
+ status = "disabled";
+};
+
+&ecap0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins_default>;
+};
+
+&sdhci1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc1_pins_default>;
+ ti,driver-strength-ohm = <50>;
+ disable-wp;
+};
+
+&usb0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_pins_default>;
+ dr_mode = "host";
+};
+
+&usb1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins_default>;
+ dr_mode = "host";
+};
+
+&mcu_spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_spi0_pins_default>;
+
+ #address-cells = <1>;
+ #size-cells= <0>;
+ ti,pindir-d0-out-d1-in = <1>;
+};
+
+&tscadc0 {
+ status = "disabled";
+};
+
+&tscadc1 {
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5>;
+ };
+};
+
+&ospi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <1>;
+ spi-max-frequency = <50000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&dss {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dss_vout1_pins_default>;
+
+ assigned-clocks = <&k3_clks 67 2>;
+ assigned-clock-parents = <&k3_clks 67 5>;
+};
+
+&dss_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@1 {
+ reg = <1>;
+
+ dpi_out: endpoint {
+ remote-endpoint = <&bridge_in>;
+ };
+ };
+};
+
+&serdes0 {
+ status = "disabled";
+};
+
+&pcie0_rc {
+ status = "disabled";
+};
+
+&pcie0_ep {
+ status = "disabled";
+};
+
+&pcie1_rc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&minipcie_pins_default>;
+
+ num-lanes = <1>;
+ phys = <&serdes1 PHY_TYPE_PCIE 0>;
+ phy-names = "pcie-phy0";
+ reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie1_ep {
+ status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
new file mode 100644
index 000000000000..4f7e3f2a6265
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ * Le Jin <le.jin@siemens.com>
+ * Jan Kiszka <jan.kiszk@siemens.com>
+ *
+ * AM6528-based (dual-core) IOT2050 Basic variant
+ * 1 GB RAM, no eMMC, main_uart0 on connector X30
+ */
+
+/dts-v1/;
+
+#include "k3-am65-iot2050-common.dtsi"
+
+/ {
+ compatible = "siemens,iot2050-basic", "ti,am654";
+ model = "SIMATIC IOT2050 Basic";
+
+ memory@80000000 {
+ device_type = "memory";
+ /* 1G RAM */
+ reg = <0x00000000 0x80000000 0x00000000 0x40000000>;
+ };
+
+ cpus {
+ cpu-map {
+ /delete-node/ cluster1;
+ };
+ /delete-node/ cpu@100;
+ /delete-node/ cpu@101;
+ };
+
+ /delete-node/ l2-cache1;
+};
+
+/* eMMC */
+&sdhci0 {
+ status = "disabled";
+};
+
+&main_pmx0 {
+ main_uart0_pins_default: main-uart0-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */
+ AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */
+ AM65X_IOPAD(0x01ec, PIN_INPUT, 0) /* (AG11) UART0_CTSn */
+ AM65X_IOPAD(0x01f0, PIN_OUTPUT, 0) /* (AD11) UART0_RTSn */
+ AM65X_IOPAD(0x0188, PIN_INPUT, 1) /* (D25) UART0_DCDn */
+ AM65X_IOPAD(0x018c, PIN_INPUT, 1) /* (B26) UART0_DSRn */
+ AM65X_IOPAD(0x0190, PIN_OUTPUT, 1) /* (A24) UART0_DTRn */
+ AM65X_IOPAD(0x0194, PIN_INPUT, 1) /* (E24) UART0_RIN */
+ >;
+ };
+};
+
+&main_uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_uart0_pins_default>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
new file mode 100644
index 000000000000..ec9617c13cdb
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ * Le Jin <le.jin@siemens.com>
+ * Jan Kiszka <jan.kiszk@siemens.com>
+ *
+ * AM6548-based (quad-core) IOT2050 Advanced variant
+ * 2 GB RAM, 16 GB eMMC, USB-serial converter on connector X30
+ */
+
+/dts-v1/;
+
+#include "k3-am65-iot2050-common.dtsi"
+
+/ {
+ compatible = "siemens,iot2050-advanced", "ti,am654";
+ model = "SIMATIC IOT2050 Advanced";
+
+ memory@80000000 {
+ device_type = "memory";
+ /* 2G RAM */
+ reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+ };
+};
+
+&main_pmx0 {
+ main_mmc0_pins_default: main-mmc0-pins-default {
+ pinctrl-single,pins = <
+ AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
+ AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
+ AM65X_IOPAD(0x01a4, PIN_INPUT_PULLUP, 0) /* (A26) MMC0_DAT0 */
+ AM65X_IOPAD(0x01a0, PIN_INPUT_PULLUP, 0) /* (E25) MMC0_DAT1 */
+ AM65X_IOPAD(0x019c, PIN_INPUT_PULLUP, 0) /* (C26) MMC0_DAT2 */
+ AM65X_IOPAD(0x0198, PIN_INPUT_PULLUP, 0) /* (A25) MMC0_DAT3 */
+ AM65X_IOPAD(0x0194, PIN_INPUT_PULLUP, 0) /* (E24) MMC0_DAT4 */
+ AM65X_IOPAD(0x0190, PIN_INPUT_PULLUP, 0) /* (A24) MMC0_DAT5 */
+ AM65X_IOPAD(0x018c, PIN_INPUT_PULLUP, 0) /* (B26) MMC0_DAT6 */
+ AM65X_IOPAD(0x0188, PIN_INPUT_PULLUP, 0) /* (D25) MMC0_DAT7 */
+ AM65X_IOPAD(0x01b8, PIN_OUTPUT_PULLUP, 7) /* (B23) MMC0_SDWP */
+ AM65X_IOPAD(0x01b4, PIN_INPUT_PULLUP, 0) /* (A23) MMC0_SDCD */
+ AM65X_IOPAD(0x01b0, PIN_INPUT, 0) /* (C25) MMC0_DS */
+ >;
+ };
+};
+
+/* eMMC */
+&sdhci0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&main_mmc0_pins_default>;
+ bus-width = <8>;
+ non-removable;
+ ti,driver-strength-ohm = <50>;
+ disable-wp;
+};
+
+&main_uart0 {
+ status = "disabled";
+};
--
2.26.2
next prev parent reply other threads:[~2021-03-11 14:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-11 14:33 [PATCH v5 0/3] arm64: Add TI AM65x-based IOT2050 boards Jan Kiszka
2021-03-11 14:33 ` [PATCH v5 1/3] dt-bindings: Add Siemens vendor prefix Jan Kiszka
2021-03-11 14:33 ` [PATCH v5 2/3] dt-bindings: arm: ti: Add bindings for Siemens IOT2050 boards Jan Kiszka
2021-03-11 14:33 ` Jan Kiszka [this message]
2021-03-11 18:37 ` [PATCH v5 0/3] arm64: Add TI AM65x-based " Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4fb05969102d14d230e03ca4312ef9706efa61e6.1615473223.git.jan.kiszka@siemens.com \
--to=jan.kiszka@siemens.com \
--cc=baocheng.su@siemens.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=le.jin@siemens.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).