From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: broonie@kernel.org
Cc: robh@kernel.org, devicetree@vger.kernel.org, lgirdwood@gmail.com,
perex@perex.cz, linux-kernel@vger.kernel.org,
alsa-devel@alsa-project.org,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: [PATCH v2 1/7] ASoC: dt-bindings: wcd938x: add bindings for wcd938x
Date: Tue, 16 Mar 2021 10:58:22 +0000 [thread overview]
Message-ID: <20210316105828.16436-2-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <20210316105828.16436-1-srinivas.kandagatla@linaro.org>
Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC
connected over SoundWire. This device has two SoundWire device RX and
TX respectively, supporting 4 x ADCs, ClassH, Ear, Aux PA, 2xHPH,
7 x TX diff inputs, 8 DMICs, MBHC.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
.../bindings/sound/qcom,wcd938x.yaml | 127 ++++++++++++++++++
1 file changed, 127 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
new file mode 100644
index 000000000000..bac93e2344c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd938x.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd938x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Qualcomm WCD9380/WCD9385 Audio Codec
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+ Qualcomm WCD9380/WCD9385 Codec is a standalone Hi-Fi audio codec IC.
+ It has RX and TX Soundwire slave devices.
+
+properties:
+ compatible:
+ const: sdw20217010d00
+
+ reg:
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO spec for reset line to use
+ maxItems: 1
+
+ direction:
+ oneOf:
+ - const: rx
+ - const: tx
+
+ vdd-buck-supply:
+ description: A reference to the 1.8V buck supply
+
+ vdd-rxtx-supply:
+ description: A reference to the 1.8V rx supply
+
+ vdd-io-supply:
+ description: A reference to the 1.8V I/O supply
+
+ qcom,micbias1-microvolt:
+ description: micbias1 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,micbias2-microvolt:
+ description: micbias2 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,micbias3-microvolt:
+ description: micbias3 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,micbias4-microvolt:
+ description: micbias4 voltage
+ minimum: 1800000
+ maximum: 2850000
+
+ qcom,mbhc-hphl-switch:
+ description: Indicates that HPHL switch type is normally closed
+ type: boolean
+
+ qcom,mbhc-ground-switch:
+ description: Indicates that Headset Gound switch type is normally closed
+ type: boolean
+
+ qcom,mbhc-vthreshold-microvolt:
+ description: |
+ Voltage threshold values for all the headset buttons
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 8
+ maxItems: 8
+
+ qcom,port-mapping:
+ description: |
+ Specifies static port mapping between slave and master ports.
+ In the order of slave port index.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 4
+ maxItems: 5
+
+ '#sound-dai-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - reset-gpios
+ - qcom,micbias1-microvolt
+ - qcom,micbias2-microvolt
+ - qcom,micbias3-microvolt
+ - qcom,micbias4-microvolt
+ - qcom,port-mapping
+ - qcom,mbhc-hphl-switch
+ - qcom,mbhc-ground-switch
+ - qcom,mbhc-vthreshold-microvolt
+ - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ soundwire@3230000 {
+ #address-cells = <2>;
+ #size-cells = <0>;
+ reg = <0x03230000 0x2000>;
+
+ codec@0,3 {
+ compatible = "sdw20217010d00";
+ reg = <0 3>;
+ reset-gpios = <&tlmm 32 0>;
+ direction = "tx";
+ #sound-dai-cells = <1>;
+ qcom,micbias1-microvolt = <1800000>;
+ qcom,micbias2-microvolt = <1800000>;
+ qcom,micbias3-microvolt = <1800000>;
+ qcom,micbias4-microvolt = <1800000>;
+ qcom,mbhc-hphl-switch;
+ qcom,mbhc-ground-switch;
+ qcom,mbhc-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+ qcom,port-mapping = <2 3 4 5>;
+ };
+ };
+
+...
--
2.21.0
next prev parent reply other threads:[~2021-03-16 10:59 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-16 10:58 [PATCH v2 0/7] ASoC: codecs: add wcd938x support Srinivas Kandagatla
2021-03-16 10:58 ` Srinivas Kandagatla [this message]
2021-03-16 17:54 ` [PATCH v2 1/7] ASoC: dt-bindings: wcd938x: add bindings for wcd938x Rob Herring
2021-03-16 10:58 ` [PATCH v2 2/7] ASoC: codecs: wcd-clsh: add new version support Srinivas Kandagatla
2021-03-16 10:58 ` [PATCH v2 3/7] ASoC: codecs: wcd938x: add basic driver Srinivas Kandagatla
2021-03-16 10:58 ` [PATCH v2 4/7] ASoC: codecs: wcd938x: add basic controls Srinivas Kandagatla
2021-03-16 10:58 ` [PATCH v2 5/7] ASoC: codecs: wcd938x: add playback dapm widgets Srinivas Kandagatla
2021-03-16 10:58 ` [PATCH v2 6/7] ASoC: codecs: wcd938x: add capture " Srinivas Kandagatla
2021-03-16 10:58 ` [PATCH v2 7/7] ASoC: codecs: wcd938x: add audio routing Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210316105828.16436-2-srinivas.kandagatla@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).