From: Badhri Jagan Sridharan <badhri@google.com>
To: Guenter Roeck <linux@roeck-us.net>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Badhri Jagan Sridharan <badhri@google.com>
Subject: [PATCH v1] usb: typec: tcpci: Added few missing TCPCI register definitions
Date: Tue, 16 Mar 2021 15:13:04 -0700 [thread overview]
Message-ID: <20210316221304.391206-1-badhri@google.com> (raw)
This change adds some of the register bit definitions from the TCPCI spec:
https://www.usb.org/sites/default/files/documents/
usb-port_controller_specification_rev2.0_v1.0_0.pdf
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
---
drivers/usb/typec/tcpm/tcpci.h | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/usb/typec/tcpm/tcpci.h b/drivers/usb/typec/tcpm/tcpci.h
index 57b6e24e0a0c..2be7a77d400e 100644
--- a/drivers/usb/typec/tcpm/tcpci.h
+++ b/drivers/usb/typec/tcpm/tcpci.h
@@ -47,7 +47,10 @@
#define TCPC_TCPC_CTRL 0x19
#define TCPC_TCPC_CTRL_ORIENTATION BIT(0)
+#define PLUG_ORNT_CC1 0
+#define PLUG_ORNT_CC2 1
#define TCPC_TCPC_CTRL_BIST_TM BIT(1)
+#define TCPC_TCPC_CTRL_EN_LK4CONN_ALRT BIT(6)
#define TCPC_EXTENDED_STATUS 0x20
#define TCPC_EXTENDED_STATUS_VSAFE0V BIT(0)
@@ -74,21 +77,28 @@
#define TCPC_POWER_CTRL_VCONN_ENABLE BIT(0)
#define TCPC_POWER_CTRL_BLEED_DISCHARGE BIT(3)
#define TCPC_POWER_CTRL_AUTO_DISCHARGE BIT(4)
+#define TCPC_DIS_VOLT_ALRM BIT(5)
+#define TCPC_POWER_CTRL_VBUS_VOLT_MON BIT(6)
#define TCPC_FAST_ROLE_SWAP_EN BIT(7)
#define TCPC_CC_STATUS 0x1d
#define TCPC_CC_STATUS_TOGGLING BIT(5)
#define TCPC_CC_STATUS_TERM BIT(4)
+#define TCPC_CC_STATUS_TERM_RP 0
+#define TCPC_CC_STATUS_TERM_RD 1
+#define TCPC_CC_STATE_SRC_OPEN 0
#define TCPC_CC_STATUS_CC2_SHIFT 2
#define TCPC_CC_STATUS_CC2_MASK 0x3
#define TCPC_CC_STATUS_CC1_SHIFT 0
#define TCPC_CC_STATUS_CC1_MASK 0x3
#define TCPC_POWER_STATUS 0x1e
+#define TCPC_POWER_STATUS_DBG_ACC_CON BIT(7)
#define TCPC_POWER_STATUS_UNINIT BIT(6)
#define TCPC_POWER_STATUS_SOURCING_VBUS BIT(4)
#define TCPC_POWER_STATUS_VBUS_DET BIT(3)
#define TCPC_POWER_STATUS_VBUS_PRES BIT(2)
+#define TCPC_POWER_STATUS_SINKING_VBUS BIT(0)
#define TCPC_FAULT_STATUS 0x1f
@@ -121,6 +131,10 @@
#define TCPC_RX_DETECT 0x2f
#define TCPC_RX_DETECT_HARD_RESET BIT(5)
#define TCPC_RX_DETECT_SOP BIT(0)
+#define TCPC_RX_DETECT_SOP1 BIT(1)
+#define TCPC_RX_DETECT_SOP2 BIT(2)
+#define TCPC_RX_DETECT_DBG1 BIT(3)
+#define TCPC_RX_DETECT_DBG2 BIT(4)
#define TCPC_RX_BYTE_CNT 0x30
#define TCPC_RX_BUF_FRAME_TYPE 0x31
@@ -139,6 +153,8 @@
#define TCPC_TX_DATA 0x54 /* through 0x6f */
#define TCPC_VBUS_VOLTAGE 0x70
+#define TCPC_VBUS_VOLTAGE_MASK 0x3ff
+#define TCPC_VBUS_VOLTAGE_LSB_MV 25
#define TCPC_VBUS_SINK_DISCONNECT_THRESH 0x72
#define TCPC_VBUS_SINK_DISCONNECT_THRESH_LSB_MV 25
#define TCPC_VBUS_SINK_DISCONNECT_THRESH_MAX 0x3ff
--
2.31.0.rc2.261.g7f71774620-goog
next reply other threads:[~2021-03-16 22:14 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-16 22:13 Badhri Jagan Sridharan [this message]
2021-03-16 22:52 ` [PATCH v1] usb: typec: tcpci: Added few missing TCPCI register definitions Guenter Roeck
2021-03-17 16:42 ` Greg Kroah-Hartman
2021-03-17 17:58 ` Guenter Roeck
2021-03-17 18:03 ` Greg Kroah-Hartman
2021-03-17 19:20 ` Guenter Roeck
2021-03-18 7:41 ` Heikki Krogerus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210316221304.391206-1-badhri@google.com \
--to=badhri@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).