From: Michael Walle <michael@walle.cc>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Michael Walle <michael@walle.cc>
Subject: [PATCH 1/2] arm64: dts: fsl-ls1028a-kontron-sl28: move MTD partitions
Date: Thu, 18 Mar 2021 18:18:55 +0100 [thread overview]
Message-ID: <20210318171856.3487-1-michael@walle.cc> (raw)
Move the MTD partitions to the partitions subnode. This is the new way
to specify the partitions, see
Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml
Signed-off-by: Michael Walle <michael@walle.cc>
---
.../freescale/fsl-ls1028a-kontron-sl28.dts | 94 ++++++++++---------
1 file changed, 49 insertions(+), 45 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index 0516076087ae..7e3a33eb2045 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -115,8 +115,6 @@
status = "okay";
flash@0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
m25p,fast-read;
spi-max-frequency = <133000000>;
@@ -125,49 +123,55 @@
spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
spi-tx-bus-width = <1>; /* 1 SPI Tx line */
- partition@0 {
- reg = <0x000000 0x010000>;
- label = "rcw";
- read-only;
- };
-
- partition@10000 {
- reg = <0x010000 0x0f0000>;
- label = "failsafe bootloader";
- read-only;
- };
-
- partition@100000 {
- reg = <0x100000 0x040000>;
- label = "failsafe DP firmware";
- read-only;
- };
-
- partition@140000 {
- reg = <0x140000 0x0a0000>;
- label = "failsafe trusted firmware";
- read-only;
- };
-
- partition@1e0000 {
- reg = <0x1e0000 0x020000>;
- label = "reserved";
- read-only;
- };
-
- partition@200000 {
- reg = <0x200000 0x010000>;
- label = "configuration store";
- };
-
- partition@210000 {
- reg = <0x210000 0x1d0000>;
- label = "bootloader";
- };
-
- partition@3e0000 {
- reg = <0x3e0000 0x020000>;
- label = "bootloader environment";
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x000000 0x010000>;
+ label = "rcw";
+ read-only;
+ };
+
+ partition@10000 {
+ reg = <0x010000 0x0f0000>;
+ label = "failsafe bootloader";
+ read-only;
+ };
+
+ partition@100000 {
+ reg = <0x100000 0x040000>;
+ label = "failsafe DP firmware";
+ read-only;
+ };
+
+ partition@140000 {
+ reg = <0x140000 0x0a0000>;
+ label = "failsafe trusted firmware";
+ read-only;
+ };
+
+ partition@1e0000 {
+ reg = <0x1e0000 0x020000>;
+ label = "reserved";
+ read-only;
+ };
+
+ partition@200000 {
+ reg = <0x200000 0x010000>;
+ label = "configuration store";
+ };
+
+ partition@210000 {
+ reg = <0x210000 0x1d0000>;
+ label = "bootloader";
+ };
+
+ partition@3e0000 {
+ reg = <0x3e0000 0x020000>;
+ label = "bootloader environment";
+ };
};
};
};
--
2.20.1
next reply other threads:[~2021-03-18 17:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-18 17:18 Michael Walle [this message]
2021-03-18 17:18 ` [PATCH 2/2] arm64: dts: fsl-ls1028a-kontron-sl28: combine unused partitions Michael Walle
2021-03-29 1:06 ` [PATCH 1/2] arm64: dts: fsl-ls1028a-kontron-sl28: move MTD partitions Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210318171856.3487-1-michael@walle.cc \
--to=michael@walle.cc \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).