linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shengjiu Wang <shengjiu.wang@nxp.com>
To: timur@kernel.org, nicoleotsuka@gmail.com, Xiubo.Lee@gmail.com,
	festevam@gmail.com, lgirdwood@gmail.com, broonie@kernel.org,
	perex@perex.cz, tiwai@suse.com, alsa-devel@alsa-project.org,
	linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH] ASoC: fsl_sai: Don't use devm_regmap_init_mmio_clk
Date: Fri, 19 Mar 2021 16:06:43 +0800	[thread overview]
Message-ID: <1616141203-13344-1-git-send-email-shengjiu.wang@nxp.com> (raw)

When there is power domain bind with bus clock,

The call flow:
devm_regmap_init_mmio_clk
   - clk_prepare()
      - clk_pm_runtime_get()

cause the power domain of clock always be enabled after
regmap_init(). which impact the power consumption.

So use devm_regmap_init_mmio instead of
devm_regmap_init_mmio_clk, then explicitly enable clock when
using by pm_runtime_get(), if CONFIG_PM=n, then
fsl_sai_runtime_resume will be explicitly called.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
---
 sound/soc/fsl/fsl_sai.c | 48 +++++++++++++++++++++++++++--------------
 1 file changed, 32 insertions(+), 16 deletions(-)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 9e7893f91882..f2c70a31c7bb 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -987,6 +987,9 @@ static int fsl_sai_check_version(struct device *dev)
 	return 0;
 }
 
+static int fsl_sai_runtime_suspend(struct device *dev);
+static int fsl_sai_runtime_resume(struct device *dev);
+
 static int fsl_sai_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -1019,24 +1022,21 @@ static int fsl_sai_probe(struct platform_device *pdev)
 			ARRAY_SIZE(fsl_sai_reg_defaults_ofs8);
 	}
 
-	sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
-			"bus", base, &fsl_sai_regmap_config);
-
-	/* Compatible with old DTB cases */
-	if (IS_ERR(sai->regmap) && PTR_ERR(sai->regmap) != -EPROBE_DEFER)
-		sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev,
-				"sai", base, &fsl_sai_regmap_config);
+	sai->regmap = devm_regmap_init_mmio(&pdev->dev, base, &fsl_sai_regmap_config);
 	if (IS_ERR(sai->regmap)) {
 		dev_err(&pdev->dev, "regmap init failed\n");
 		return PTR_ERR(sai->regmap);
 	}
 
-	/* No error out for old DTB cases but only mark the clock NULL */
 	sai->bus_clk = devm_clk_get(&pdev->dev, "bus");
+	/* Compatible with old DTB cases */
+	if (IS_ERR(sai->bus_clk) && PTR_ERR(sai->bus_clk) != -EPROBE_DEFER)
+		sai->bus_clk = devm_clk_get(&pdev->dev, "sai");
 	if (IS_ERR(sai->bus_clk)) {
 		dev_err(&pdev->dev, "failed to get bus clock: %ld\n",
 				PTR_ERR(sai->bus_clk));
-		sai->bus_clk = NULL;
+		/* -EPROBE_DEFER */
+		return PTR_ERR(sai->bus_clk);
 	}
 
 	for (i = 1; i < FSL_SAI_MCLK_MAX; i++) {
@@ -1117,6 +1117,18 @@ static int fsl_sai_probe(struct platform_device *pdev)
 	sai->dma_params_tx.maxburst = FSL_SAI_MAXBURST_TX;
 
 	platform_set_drvdata(pdev, sai);
+	pm_runtime_enable(&pdev->dev);
+	if (!pm_runtime_enabled(&pdev->dev)) {
+		ret = fsl_sai_runtime_resume(&pdev->dev);
+		if (ret)
+			goto err_pm_disable;
+	}
+
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(&pdev->dev);
+		goto err_pm_get_sync;
+	}
 
 	/* Get sai version */
 	ret = fsl_sai_check_version(&pdev->dev);
@@ -1130,26 +1142,30 @@ static int fsl_sai_probe(struct platform_device *pdev)
 				   FSL_SAI_MCTL_MCLK_EN, FSL_SAI_MCTL_MCLK_EN);
 	}
 
-	pm_runtime_enable(&pdev->dev);
-	regcache_cache_only(sai->regmap, true);
+	ret = pm_runtime_put_sync(&pdev->dev);
+	if (ret < 0)
+		goto err_pm_get_sync;
 
 	ret = devm_snd_soc_register_component(&pdev->dev, &fsl_component,
 					      &sai->cpu_dai_drv, 1);
 	if (ret)
-		goto err_pm_disable;
+		goto err_pm_get_sync;
 
 	if (sai->soc_data->use_imx_pcm) {
 		ret = imx_pcm_dma_init(pdev, IMX_SAI_DMABUF_SIZE);
 		if (ret)
-			goto err_pm_disable;
+			goto err_pm_get_sync;
 	} else {
 		ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0);
 		if (ret)
-			goto err_pm_disable;
+			goto err_pm_get_sync;
 	}
 
 	return ret;
 
+err_pm_get_sync:
+	if (!pm_runtime_status_suspended(&pdev->dev))
+		fsl_sai_runtime_suspend(&pdev->dev);
 err_pm_disable:
 	pm_runtime_disable(&pdev->dev);
 
@@ -1159,6 +1175,8 @@ static int fsl_sai_probe(struct platform_device *pdev)
 static int fsl_sai_remove(struct platform_device *pdev)
 {
 	pm_runtime_disable(&pdev->dev);
+	if (!pm_runtime_status_suspended(&pdev->dev))
+		fsl_sai_runtime_suspend(&pdev->dev);
 
 	return 0;
 }
@@ -1219,7 +1237,6 @@ static const struct of_device_id fsl_sai_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, fsl_sai_ids);
 
-#ifdef CONFIG_PM
 static int fsl_sai_runtime_suspend(struct device *dev)
 {
 	struct fsl_sai *sai = dev_get_drvdata(dev);
@@ -1292,7 +1309,6 @@ static int fsl_sai_runtime_resume(struct device *dev)
 
 	return ret;
 }
-#endif /* CONFIG_PM */
 
 static const struct dev_pm_ops fsl_sai_pm_ops = {
 	SET_RUNTIME_PM_OPS(fsl_sai_runtime_suspend,
-- 
2.27.0


             reply	other threads:[~2021-03-19  8:21 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-19  8:06 Shengjiu Wang [this message]
2021-03-22 13:00 ` [PATCH] ASoC: fsl_sai: Don't use devm_regmap_init_mmio_clk Mark Brown
2021-04-11 14:41 ` Guenter Roeck
2021-04-12 10:37   ` Shengjiu Wang
2021-04-12 15:52     ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1616141203-13344-1-git-send-email-shengjiu.wang@nxp.com \
    --to=shengjiu.wang@nxp.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=festevam@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=perex@perex.cz \
    --cc=timur@kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).