From: Geert Uytterhoeven <geert@linux-m68k.org>
To: Robin van der Gracht <robin@protonic.nl>,
Rob Herring <robh+dt@kernel.org>, Miguel Ojeda <ojeda@kernel.org>,
Paul Burton <paulburton@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: devicetree@vger.kernel.org, linux-mips@vger.kernel.org,
linux-kernel@vger.kernel.org,
Geert Uytterhoeven <geert@linux-m68k.org>
Subject: [PATCH 02/17] dt-bindings: auxdisplay: ht16k33: Document Adafruit segment displays
Date: Mon, 22 Mar 2021 15:48:33 +0100 [thread overview]
Message-ID: <20210322144848.1065067-3-geert@linux-m68k.org> (raw)
In-Reply-To: <20210322144848.1065067-1-geert@linux-m68k.org>
The Holtek HT16K33 LED controller is not only used for driving
dot-matrix displays, but also for driving segment displays.
Document compatible values for the Adafruit 7-segment[1] and
14-segment[2] FeatherWing expansion boards with red displays. According
to the schematics, all other Adafruit 7-segment and 14-segment display
backpack and FeatherWing expansion boards (including bare boards and
boards fitted with displays) are compatible with these two boards.
Add a "color" property to support the different color variants.
[1] https://www.adafruit.com/product/3108
[2] https://www.adafruit.com/product/3130
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
Alternatives I considered:
1. Document the attached display type in a child node.
I.e. specify segment type, number of characters, and wiring.
Especially the latter would become really complex, due to the sheer
amount of possible wiring combinations.
Using this method, you also loose the ability to just connect a
display to an i2c bus, and instantiate the device from sysfs,
without using DT:
echo adafruit,3130 0x70 > /sys/class/i2c/i2c-adapter/.../new_device
2. Do not use the "color" property, but document all Adafruit
7-segment and 14-segment display backpack and FeatherWing expansion
boards.
This would lead to a myriad of compatible values:
- items:
- enum:
- adafruit,878 # 0.56" 4-Digit 7-Segment Display Backpack (Red)
- adafruit,879 # 0.56" 4-Digit 7-Segment Display Backpack (Yellow)
- adafruit,880 # 0.56" 4-Digit 7-Segment Display Backpack (Green)
- adafruit,881 # 0.56" 4-Digit 7-Segment Display Backpack (Blue)
- adafruit,1002 # 0.56" 4-Digit 7-Segment Display Backpack (White)
- const: adafruit,877 # 0.56" 4-Digit 7-Segment Backpack
- const: holtek,ht16k33
- items:
- enum:
- adafruit,1268 # 1.2" 4-Digit 7-Segment Display Backpack (Green)
- adafruit,1269 # 1.2" 4-Digit 7-Segment Display Backpack (Yellow)
- adafruit,1270 # 1.2" 4-Digit 7-Segment Display Backpack (Red)
- const: adafruit,1271 # 1.2" 4-Digit 7-Segment Backpack
- const: holtek,ht16k33
- items:
- enum:
- adafruit,1911 # 0.54" Quad Alphanumeric Display Backpack (Red)
- adafruit,1912 # 0.54" Quad Alphanumeric Display Backpack (Blue)
- adafruit,2157 # 0.54" Quad Alphanumeric Display Backpack (White)
- adafruit,2158 # 0.54" Quad Alphanumeric Display Backpack (Yellow)
- adafruit,2159 # 0.54" Quad Alphanumeric Display Backpack (Yellow-Green)
- adafruit,2160 # 0.54" Quad Alphanumeric Display Backpack (Green)
- const: adafruit,1910 # 0.54" Quad 14-segment Alphanumeric Backpack
- const: holtek,ht16k33
- items:
- enum:
- adafruit,3106 # 0.56" 4-Digit 7-Segment FeatherWing Display (Blue)
- adafruit,3107 # 0.56" 4-Digit 7-Segment FeatherWing Display (Green)
- adafruit,3108 # 0.56" 4-Digit 7-Segment FeatherWing Display (Red)
- adafruit,3109 # 0.56" 4-Digit 7-Segment FeatherWing Display (White)
- adafruit,3110 # 0.56" 4-Digit 7-Segment FeatherWing Display (Yellow)
- const: adafruit,3088 # 0.56" 4-Digit 7-Segment FeatherWing
- const: holtek,ht16k33
- items:
- enum:
- adafruit,3127 # 0.54" Quad Alphanumeric FeatherWing Display (White)
- adafruit,3128 # 0.54" Quad Alphanumeric FeatherWing Display (Blue)
- adafruit,3129 # 0.54" Quad Alphanumeric FeatherWing Display (Green)
- adafruit,3130 # 0.54" Quad Alphanumeric FeatherWing Display (Red)
- adafruit,3131 # 0.54" Quad Alphanumeric FeatherWing Display (Yellow)
- adafruit,3132 # 0.54" Quad Alphanumeric FeatherWing Display (Yellow-Green)
- const: adafruit,3089 # 0.54" Quad 14-segment Alphanumeric FeatherWing
- const: holtek,ht16k33
---
.../bindings/auxdisplay/holtek,ht16k33.yaml | 22 ++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
index 64ffff460026040f..4380a5177a67d2e2 100644
--- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -14,14 +14,23 @@ allOf:
properties:
compatible:
- const: holtek,ht16k33
+ oneOf:
+ - items:
+ - const: adafruit,3108 # 0.56" 4-Digit 7-Segment FeatherWing Display (Red)
+ - const: holtek,ht16k33
+
+ - items:
+ - const: adafruit,3130 # 0.54" Quad Alphanumeric FeatherWing Display (Red)
+ - const: holtek,ht16k33
+
+ - const: holtek,ht16k33 # Generic 16*8 LED controller with dot-matrix display
reg:
maxItems: 1
refresh-rate-hz:
maxItems: 1
- description: Display update interval in Hertz
+ description: Display update interval in Hertz for dot-matrix displays
interrupts:
maxItems: 1
@@ -41,10 +50,17 @@ properties:
default: 16
description: Initial brightness level
+ color: true
+ description:
+ Color of the display. Use one of the LED_COLOR_ID_* prefixed definitions
+ from the header include/dt-bindings/leds/common.h. The default is red.
+ minimum: 0
+ maximum: 9
+ default: 1
+
required:
- compatible
- reg
- - refresh-rate-hz
additionalProperties: false
--
2.25.1
next prev parent reply other threads:[~2021-03-22 14:49 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-22 14:48 [PATCH 00/17] auxdisplay: ht16k33: Add character display support Geert Uytterhoeven
2021-03-22 14:48 ` [PATCH 01/17] uapi: Add <linux/map_to_14segment.h> Geert Uytterhoeven
2021-03-22 17:05 ` Miguel Ojeda
2021-03-22 17:51 ` Geert Uytterhoeven
2021-03-22 14:48 ` Geert Uytterhoeven [this message]
2021-03-22 17:38 ` [PATCH 02/17] dt-bindings: auxdisplay: ht16k33: Document Adafruit segment displays Rob Herring
2021-03-23 9:12 ` robin
2021-05-18 14:35 ` Geert Uytterhoeven
2021-05-19 10:37 ` Robin van der Gracht
2021-05-19 11:02 ` Geert Uytterhoeven
2021-03-22 14:48 ` [PATCH 03/17] auxdisplay: img-ascii-lcd: Fix lock-up when displaying empty string Geert Uytterhoeven
2021-03-22 14:48 ` [PATCH 04/17] auxdisplay: img-ascii-lcd: Add helper variable dev Geert Uytterhoeven
2021-03-22 16:59 ` Miguel Ojeda
2021-03-22 17:53 ` Geert Uytterhoeven
2021-03-22 14:48 ` [PATCH 05/17] auxdisplay: img-ascii-lcd: Convert device attribute to sysfs_emit() Geert Uytterhoeven
2021-03-22 14:48 ` [PATCH 06/17] auxdisplay: Extract character line display core support Geert Uytterhoeven
2021-03-23 8:18 ` robin
2021-03-23 8:52 ` Geert Uytterhoeven
2021-03-22 14:48 ` [PATCH 07/17] auxdisplay: linedisp: Use kmemdup_nul() helper Geert Uytterhoeven
2021-03-22 14:48 ` [PATCH 08/17] auxdisplay: linedisp: Add support for changing scroll rate Geert Uytterhoeven
2021-03-22 14:48 ` [PATCH 09/17] auxdisplay: ht16k33: Use HT16K33_FB_SIZE in ht16k33_initialize() Geert Uytterhoeven
2021-03-23 7:59 ` robin
2021-03-22 14:48 ` [PATCH 10/17] auxdisplay: ht16k33: Remove unneeded error check in keypad probe() Geert Uytterhoeven
2021-03-23 8:08 ` robin
2021-03-22 14:48 ` [PATCH 11/17] auxdisplay: ht16k33: Convert to simple i2c probe function Geert Uytterhoeven
2021-03-23 8:31 ` robin
2021-03-22 14:48 ` [PATCH 12/17] auxdisplay: ht16k33: Add helper variable dev Geert Uytterhoeven
2021-03-23 8:57 ` robin
2021-03-22 14:48 ` [PATCH 13/17] auxdisplay: ht16k33: Move delayed work Geert Uytterhoeven
2021-03-22 14:48 ` [PATCH 14/17] auxdisplay: ht16k33: Extract ht16k33_brightness_set() Geert Uytterhoeven
2021-03-22 14:48 ` [PATCH 15/17] auxdisplay: ht16k33: Extract frame buffer probing Geert Uytterhoeven
2021-03-22 14:48 ` [PATCH 16/17] auxdisplay: ht16k33: Add support for segment displays Geert Uytterhoeven
2021-03-29 7:08 ` Robin van der Gracht
2021-03-29 7:15 ` Geert Uytterhoeven
2021-03-29 7:30 ` Robin van der Gracht
2021-03-22 14:48 ` [PATCH 17/17] auxdisplay: ht16k33: Add segment display LED support Geert Uytterhoeven
2021-03-23 10:08 ` Robin van der Gracht
2021-03-23 12:32 ` Geert Uytterhoeven
2021-03-23 20:40 ` Pavel Machek
2021-03-24 8:31 ` Geert Uytterhoeven
2021-03-27 22:19 ` Pavel Machek
2021-06-25 12:39 ` Geert Uytterhoeven
2021-03-22 17:03 ` [PATCH 00/17] auxdisplay: ht16k33: Add character display support Miguel Ojeda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210322144848.1065067-3-geert@linux-m68k.org \
--to=geert@linux-m68k.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=ojeda@kernel.org \
--cc=paulburton@kernel.org \
--cc=robh+dt@kernel.org \
--cc=robin@protonic.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).