linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kai-Heng Feng <kai.heng.feng@canonical.com>
To: tiwai@suse.com
Cc: "Kai-Heng Feng" <kai.heng.feng@canonical.com>,
	"Takashi Iwai" <tiwai@suse.de>,
	"Jaroslav Kysela" <perex@perex.cz>,
	"Joe Perches" <joe@perches.com>,
	"Mark Brown" <broonie@kernel.org>,
	"Chris Chiu" <chiu@endlessm.com>, "Tom Yan" <tom.ty89@gmail.com>,
	"Lars-Peter Clausen" <lars@metafoo.de>,
	"Thomas Ebeling" <penguins@bollie.de>,
	"František Kučera" <franta-linux@frantovo.cz>,
	"Xiyu Yang" <xiyuyang19@fudan.edu.cn>,
	"Olivia Mackintosh" <livvy@base.nu>,
	alsa-devel@alsa-project.org (moderated list:SOUND),
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v3 2/2] ALSA: usb-audio: Check connector value on resume
Date: Fri, 26 Mar 2021 00:59:13 +0800	[thread overview]
Message-ID: <20210325165918.22593-2-kai.heng.feng@canonical.com> (raw)
In-Reply-To: <20210325165918.22593-1-kai.heng.feng@canonical.com>

Rear Mic on Lenovo P620 cannot record after S3, despite that there's no
error and the other two functions of the USB audio, Line In and Line
Out, work just fine.

The mic starts to work again after running userspace app like "alsactl
store". Following the lead, the evidence shows that as soon as connector
status is queried, the mic can work again.

So also check connector value on resume to "wake up" the USB audio to
make it functional.

This can be device specific, however I think this generic approach may
benefit more than one device.

Now the resume callback checks connector, and a new callback,
reset_resume, to also restore switches and volumes.

Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
v3:
 - New callback to handle resume and reset-resume separately.

v2:
 - Remove reset-resume.
 - Fold the connector checking to the mixer resume callback.

 sound/usb/mixer.c        | 44 +++++++++++++++++++++++++++++++---------
 sound/usb/mixer.h        |  1 +
 sound/usb/mixer_quirks.c |  2 +-
 3 files changed, 36 insertions(+), 11 deletions(-)

diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c
index 5a2d9a768f70..2faf5767c7f8 100644
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -3631,20 +3631,43 @@ static int restore_mixer_value(struct usb_mixer_elem_list *list)
 	return 0;
 }
 
+static int default_mixer_resume(struct usb_mixer_elem_list *list)
+{
+	struct usb_mixer_elem_info *cval = mixer_elem_list_to_info(list);
+
+	/* get connector value to "wake up" the USB audio */
+	if (cval->val_type == USB_MIXER_BOOLEAN && cval->channels == 1)
+		get_connector_value(cval, NULL, NULL);
+
+	return 0;
+}
+
+static int default_mixer_reset_resume(struct usb_mixer_elem_list *list)
+{
+	int err = default_mixer_resume(list);
+
+	if (err < 0)
+		return err;
+	return restore_mixer_value(list);
+}
+
 int snd_usb_mixer_resume(struct usb_mixer_interface *mixer, bool reset_resume)
 {
 	struct usb_mixer_elem_list *list;
+	usb_mixer_elem_resume_func_t f;
 	int id, err;
 
-	if (reset_resume) {
-		/* restore cached mixer values */
-		for (id = 0; id < MAX_ID_ELEMS; id++) {
-			for_each_mixer_elem(list, mixer, id) {
-				if (list->resume) {
-					err = list->resume(list);
-					if (err < 0)
-						return err;
-				}
+	/* restore cached mixer values */
+	for (id = 0; id < MAX_ID_ELEMS; id++) {
+		for_each_mixer_elem(list, mixer, id) {
+			if (reset_resume)
+				f = list->reset_resume;
+			else
+				f = list->resume;
+			if (f) {
+				err = f(list);
+				if (err < 0)
+					return err;
 			}
 		}
 	}
@@ -3663,6 +3686,7 @@ void snd_usb_mixer_elem_init_std(struct usb_mixer_elem_list *list,
 	list->id = unitid;
 	list->dump = snd_usb_mixer_dump_cval;
 #ifdef CONFIG_PM
-	list->resume = restore_mixer_value;
+	list->resume = default_mixer_resume;
+	list->reset_resume = default_mixer_reset_resume;
 #endif
 }
diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h
index c29e27ac43a7..e5a01f17bf3c 100644
--- a/sound/usb/mixer.h
+++ b/sound/usb/mixer.h
@@ -69,6 +69,7 @@ struct usb_mixer_elem_list {
 	bool is_std_info;
 	usb_mixer_elem_dump_func_t dump;
 	usb_mixer_elem_resume_func_t resume;
+	usb_mixer_elem_resume_func_t reset_resume;
 };
 
 /* iterate over mixer element list of the given unit id */
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index ffd922327ae4..b7f9c2fded05 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -151,7 +151,7 @@ static int add_single_ctl_with_resume(struct usb_mixer_interface *mixer,
 		*listp = list;
 	list->mixer = mixer;
 	list->id = id;
-	list->resume = resume;
+	list->reset_resume = resume;
 	kctl = snd_ctl_new1(knew, list);
 	if (!kctl) {
 		kfree(list);
-- 
2.30.2


  reply	other threads:[~2021-03-25 17:00 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-25 16:59 [PATCH v3 1/2] ALSA: usb-audio: Carve out connector value checking into a helper Kai-Heng Feng
2021-03-25 16:59 ` Kai-Heng Feng [this message]
2021-03-26  8:11   ` [PATCH v3 2/2] ALSA: usb-audio: Check connector value on resume Takashi Iwai
2021-03-26  8:11 ` [PATCH v3 1/2] ALSA: usb-audio: Carve out connector value checking into a helper Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210325165918.22593-2-kai.heng.feng@canonical.com \
    --to=kai.heng.feng@canonical.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=chiu@endlessm.com \
    --cc=franta-linux@frantovo.cz \
    --cc=joe@perches.com \
    --cc=lars@metafoo.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=livvy@base.nu \
    --cc=penguins@bollie.de \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    --cc=tiwai@suse.de \
    --cc=tom.ty89@gmail.com \
    --cc=xiyuyang19@fudan.edu.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).