From: Shengjiu Wang <shengjiu.wang@nxp.com>
To: lgirdwood@gmail.com, broonie@kernel.org, perex@perex.cz,
tiwai@suse.com, alsa-devel@alsa-project.org,
linux-kernel@vger.kernel.org, robh+dt@kernel.org,
devicetree@vger.kernel.org
Subject: [PATCH 1/2] ASoC: ak5558: Add support for ak5552
Date: Tue, 30 Mar 2021 14:32:51 +0800 [thread overview]
Message-ID: <1617085972-6094-1-git-send-email-shengjiu.wang@nxp.com> (raw)
From: Viorel Suman <viorel.suman@nxp.com>
AK5552 is a 32-bit 2ch ADC and has the same register
map as AK5558.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
sound/soc/codecs/ak5558.c | 93 ++++++++++++++++++++++++++++++++++++---
1 file changed, 88 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/ak5558.c b/sound/soc/codecs/ak5558.c
index 85bdd0534180..af12afa83b4f 100644
--- a/sound/soc/codecs/ak5558.c
+++ b/sound/soc/codecs/ak5558.c
@@ -9,6 +9,7 @@
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
@@ -23,6 +24,11 @@
#include "ak5558.h"
+enum ak555x_type {
+ AK5558,
+ AK5552,
+};
+
#define AK5558_NUM_SUPPLIES 2
static const char *ak5558_supply_names[AK5558_NUM_SUPPLIES] = {
"DVDD",
@@ -59,6 +65,15 @@ static const struct soc_enum ak5558_mono_enum[] = {
ARRAY_SIZE(mono_texts), mono_texts),
};
+static const char * const mono_5552_texts[] = {
+ "2 Slot", "1 Slot (Fixed)", "2 Slot", "1 Slot (Optimal)",
+};
+
+static const struct soc_enum ak5552_mono_enum[] = {
+ SOC_ENUM_SINGLE(AK5558_01_POWER_MANAGEMENT2, 1,
+ ARRAY_SIZE(mono_5552_texts), mono_5552_texts),
+};
+
static const char * const digfil_texts[] = {
"Sharp Roll-Off", "Show Roll-Off",
"Short Delay Sharp Roll-Off", "Short Delay Show Roll-Off",
@@ -74,6 +89,11 @@ static const struct snd_kcontrol_new ak5558_snd_controls[] = {
SOC_ENUM("AK5558 Digital Filter", ak5558_adcset_enum[0]),
};
+static const struct snd_kcontrol_new ak5552_snd_controls[] = {
+ SOC_ENUM("AK5552 Monaural Mode", ak5552_mono_enum[0]),
+ SOC_ENUM("AK5552 Digital Filter", ak5558_adcset_enum[0]),
+};
+
static const struct snd_soc_dapm_widget ak5558_dapm_widgets[] = {
/* Analog Input */
SND_SOC_DAPM_INPUT("AIN1"),
@@ -97,6 +117,17 @@ static const struct snd_soc_dapm_widget ak5558_dapm_widgets[] = {
SND_SOC_DAPM_AIF_OUT("SDTO", "Capture", 0, SND_SOC_NOPM, 0, 0),
};
+static const struct snd_soc_dapm_widget ak5552_dapm_widgets[] = {
+ /* Analog Input */
+ SND_SOC_DAPM_INPUT("AIN1"),
+ SND_SOC_DAPM_INPUT("AIN2"),
+
+ SND_SOC_DAPM_ADC("ADC Ch1", NULL, AK5558_00_POWER_MANAGEMENT1, 0, 0),
+ SND_SOC_DAPM_ADC("ADC Ch2", NULL, AK5558_00_POWER_MANAGEMENT1, 1, 0),
+
+ SND_SOC_DAPM_AIF_OUT("SDTO", "Capture", 0, SND_SOC_NOPM, 0, 0),
+};
+
static const struct snd_soc_dapm_route ak5558_intercon[] = {
{"ADC Ch1", NULL, "AIN1"},
{"SDTO", NULL, "ADC Ch1"},
@@ -123,6 +154,14 @@ static const struct snd_soc_dapm_route ak5558_intercon[] = {
{"SDTO", NULL, "ADC Ch8"},
};
+static const struct snd_soc_dapm_route ak5552_intercon[] = {
+ {"ADC Ch1", NULL, "AIN1"},
+ {"SDTO", NULL, "ADC Ch1"},
+
+ {"ADC Ch2", NULL, "AIN2"},
+ {"SDTO", NULL, "ADC Ch2"},
+};
+
static int ak5558_set_mcki(struct snd_soc_component *component)
{
return snd_soc_component_update_bits(component, AK5558_02_CONTROL1, AK5558_CKS,
@@ -267,6 +306,18 @@ static struct snd_soc_dai_driver ak5558_dai = {
.ops = &ak5558_dai_ops,
};
+static struct snd_soc_dai_driver ak5552_dai = {
+ .name = "ak5558-aif",
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = SNDRV_PCM_RATE_KNOT,
+ .formats = AK5558_FORMATS,
+ },
+ .ops = &ak5558_dai_ops,
+};
+
static void ak5558_power_off(struct ak5558_priv *ak5558)
{
if (!ak5558->reset_gpiod)
@@ -354,6 +405,21 @@ static const struct snd_soc_component_driver soc_codec_dev_ak5558 = {
.non_legacy_dai_naming = 1,
};
+static const struct snd_soc_component_driver soc_codec_dev_ak5552 = {
+ .probe = ak5558_probe,
+ .remove = ak5558_remove,
+ .controls = ak5552_snd_controls,
+ .num_controls = ARRAY_SIZE(ak5552_snd_controls),
+ .dapm_widgets = ak5552_dapm_widgets,
+ .num_dapm_widgets = ARRAY_SIZE(ak5552_dapm_widgets),
+ .dapm_routes = ak5552_intercon,
+ .num_dapm_routes = ARRAY_SIZE(ak5552_intercon),
+ .idle_bias_on = 1,
+ .use_pmdown_time = 1,
+ .endianness = 1,
+ .non_legacy_dai_naming = 1,
+};
+
static const struct regmap_config ak5558_regmap = {
.reg_bits = 8,
.val_bits = 8,
@@ -368,6 +434,7 @@ static int ak5558_i2c_probe(struct i2c_client *i2c)
{
struct ak5558_priv *ak5558;
int ret = 0;
+ int dev_id;
int i;
ak5558 = devm_kzalloc(&i2c->dev, sizeof(*ak5558), GFP_KERNEL);
@@ -396,11 +463,26 @@ static int ak5558_i2c_probe(struct i2c_client *i2c)
return ret;
}
- ret = devm_snd_soc_register_component(&i2c->dev,
- &soc_codec_dev_ak5558,
- &ak5558_dai, 1);
- if (ret)
+ dev_id = (uintptr_t)of_device_get_match_data(&i2c->dev);
+ switch (dev_id) {
+ case AK5552:
+ ret = devm_snd_soc_register_component(&i2c->dev,
+ &soc_codec_dev_ak5552,
+ &ak5552_dai, 1);
+ break;
+ case AK5558:
+ ret = devm_snd_soc_register_component(&i2c->dev,
+ &soc_codec_dev_ak5558,
+ &ak5558_dai, 1);
+ break;
+ default:
+ dev_err(&i2c->dev, "unexpected device type\n");
+ return -EINVAL;
+ }
+ if (ret < 0) {
+ dev_err(&i2c->dev, "failed to register component: %d\n", ret);
return ret;
+ }
pm_runtime_enable(&i2c->dev);
regcache_cache_only(ak5558->regmap, true);
@@ -416,7 +498,8 @@ static int ak5558_i2c_remove(struct i2c_client *i2c)
}
static const struct of_device_id ak5558_i2c_dt_ids[] __maybe_unused = {
- { .compatible = "asahi-kasei,ak5558"},
+ { .compatible = "asahi-kasei,ak5558", .data = (void *) AK5558 },
+ { .compatible = "asahi-kasei,ak5552", .data = (void *) AK5552 },
{ }
};
MODULE_DEVICE_TABLE(of, ak5558_i2c_dt_ids);
--
2.27.0
next reply other threads:[~2021-03-30 6:47 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-30 6:32 Shengjiu Wang [this message]
2021-03-30 6:32 ` [PATCH 2/2] ASoC: dt-bindings: ak5558: Add compatible string for ak5552 Shengjiu Wang
2021-03-30 22:46 ` Rob Herring
2021-03-30 15:05 ` [PATCH 1/2] ASoC: ak5558: Add support " Mark Brown
2021-03-31 5:45 ` Shengjiu Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1617085972-6094-1-git-send-email-shengjiu.wang@nxp.com \
--to=shengjiu.wang@nxp.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).