From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: gregkh@linuxfoundation.org
Cc: linux-kernel@vger.kernel.org, "Rafał Miłecki" <rafal@milecki.pl>,
"Srinivas Kandagatla" <srinivas.kandagatla@linaro.org>
Subject: [PATCH 05/10] nvmem: brcm_nvram: new driver exposing Broadcom's NVRAM
Date: Tue, 30 Mar 2021 12:12:36 +0100 [thread overview]
Message-ID: <20210330111241.19401-6-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <20210330111241.19401-1-srinivas.kandagatla@linaro.org>
From: Rafał Miłecki <rafal@milecki.pl>
This driver provides access to Broadcom's NVRAM.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
drivers/nvmem/Kconfig | 9 +++++
drivers/nvmem/Makefile | 2 +
drivers/nvmem/brcm_nvram.c | 78 ++++++++++++++++++++++++++++++++++++++
3 files changed, 89 insertions(+)
create mode 100644 drivers/nvmem/brcm_nvram.c
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 75d2594c16e1..642ddc699fd1 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -278,4 +278,13 @@ config NVMEM_RMEM
This driver can also be built as a module. If so, the module
will be called nvmem-rmem.
+
+config NVMEM_BRCM_NVRAM
+ tristate "Broadcom's NVRAM support"
+ depends on ARCH_BCM_5301X || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This driver provides support for Broadcom's NVRAM that can be accessed
+ using I/O mapping.
+
endif
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 5376b8e0dae5..bbea1410240a 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -57,3 +57,5 @@ obj-$(CONFIG_SPRD_EFUSE) += nvmem_sprd_efuse.o
nvmem_sprd_efuse-y := sprd-efuse.o
obj-$(CONFIG_NVMEM_RMEM) += nvmem-rmem.o
nvmem-rmem-y := rmem.o
+obj-$(CONFIG_NVMEM_BRCM_NVRAM) += nvmem_brcm_nvram.o
+nvmem_brcm_nvram-y := brcm_nvram.o
diff --git a/drivers/nvmem/brcm_nvram.c b/drivers/nvmem/brcm_nvram.c
new file mode 100644
index 000000000000..bd2ecaaf4585
--- /dev/null
+++ b/drivers/nvmem/brcm_nvram.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+
+struct brcm_nvram {
+ struct device *dev;
+ void __iomem *base;
+};
+
+static int brcm_nvram_read(void *context, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct brcm_nvram *priv = context;
+ u8 *dst = val;
+
+ while (bytes--)
+ *dst++ = readb(priv->base + offset++);
+
+ return 0;
+}
+
+static int brcm_nvram_probe(struct platform_device *pdev)
+{
+ struct nvmem_config config = {
+ .name = "brcm-nvram",
+ .reg_read = brcm_nvram_read,
+ };
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct brcm_nvram *priv;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ priv->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ config.dev = dev;
+ config.priv = priv;
+ config.size = resource_size(res);
+
+ return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &config));
+}
+
+static const struct of_device_id brcm_nvram_of_match_table[] = {
+ { .compatible = "brcm,nvram", },
+ {},
+};
+
+static struct platform_driver brcm_nvram_driver = {
+ .probe = brcm_nvram_probe,
+ .driver = {
+ .name = "brcm_nvram",
+ .of_match_table = brcm_nvram_of_match_table,
+ },
+};
+
+static int __init brcm_nvram_init(void)
+{
+ return platform_driver_register(&brcm_nvram_driver);
+}
+
+subsys_initcall_sync(brcm_nvram_init);
+
+MODULE_AUTHOR("Rafał Miłecki");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, brcm_nvram_of_match_table);
--
2.21.0
next prev parent reply other threads:[~2021-03-30 11:14 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-30 11:12 [PATCH 00/10] nvmem: patches (set 1) for 5.13 Srinivas Kandagatla
2021-03-30 11:12 ` [PATCH 01/10] dt-bindings: nvmem: mediatek: add support for MediaTek mt8192 SoC Srinivas Kandagatla
2021-03-30 11:12 ` [PATCH 02/10] nvmem: convert comma to semicolon Srinivas Kandagatla
2021-03-30 11:12 ` [PATCH 03/10] drivers: nvmem: Fix voltage settings for QTI qfprom-efuse Srinivas Kandagatla
2021-03-30 11:12 ` [PATCH 04/10] dt-bindings: nvmem: add Broadcom's NVRAM Srinivas Kandagatla
2021-03-30 11:12 ` Srinivas Kandagatla [this message]
2021-03-30 11:12 ` [PATCH 06/10] nvmem: core: Add functions to make number reading easy Srinivas Kandagatla
2021-03-30 11:12 ` [PATCH 07/10] nvmem: core: Fix unintentional sign extension issue Srinivas Kandagatla
2021-03-30 11:12 ` [PATCH 08/10] nvmem: rmem: fix undefined reference to memremap Srinivas Kandagatla
2021-03-30 11:12 ` [PATCH 09/10] dt-bindings: nvmem: Add SoC compatible for sc7280 Srinivas Kandagatla
2021-03-30 11:12 ` [PATCH 10/10] nvmem: qfprom: Add support for fuse blowing on sc7280 Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210330111241.19401-6-srinivas.kandagatla@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rafal@milecki.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).