From: Greentime Hu <greentime.hu@sifive.com>
To: greentime.hu@sifive.com, paul.walmsley@sifive.com,
hes@sifive.com, erik.danie@sifive.com, zong.li@sifive.com,
bhelgaas@google.com, robh+dt@kernel.org, aou@eecs.berkeley.edu,
mturquette@baylibre.com, sboyd@kernel.org,
lorenzo.pieralisi@arm.com, p.zabel@pengutronix.de,
alex.dewar90@gmail.com, khilman@baylibre.com,
hayashi.kunihiko@socionext.com, vidyas@nvidia.com,
jh80.chung@samsung.com, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
helgaas@kernel.org
Subject: [PATCH v4 4/6] dt-bindings: PCI: Add SiFive FU740 PCIe host controller
Date: Thu, 1 Apr 2021 14:00:52 +0800 [thread overview]
Message-ID: <20210401060054.40788-5-greentime.hu@sifive.com> (raw)
In-Reply-To: <20210401060054.40788-1-greentime.hu@sifive.com>
Add PCIe host controller DT bindings of SiFive FU740.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
---
.../bindings/pci/sifive,fu740-pcie.yaml | 109 ++++++++++++++++++
1 file changed, 109 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
diff --git a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
new file mode 100644
index 000000000000..ccb58e5f06d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/sifive,fu740-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive FU740 PCIe host controller
+
+description: |+
+ SiFive FU740 PCIe host controller is based on the Synopsys DesignWare
+ PCI core. It shares common features with the PCIe DesignWare core and
+ inherits common properties defined in
+ Documentation/devicetree/bindings/pci/designware-pcie.txt.
+
+maintainers:
+ - Paul Walmsley <paul.walmsley@sifive.com>
+ - Greentime Hu <greentime.hu@sifive.com>
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ const: sifive,fu740-pcie
+
+ reg:
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: config
+ - const: mgmt
+
+ num-lanes:
+ const: 8
+
+ msi-parent: true
+
+ interrupt-names:
+ items:
+ - const: msi
+ - const: inta
+ - const: intb
+ - const: intc
+ - const: intd
+
+ resets:
+ description: A phandle to the PCIe power up reset line.
+
+ pwren-gpios:
+ description: Should specify the GPIO for controlling the PCI bus device power on.
+ maxItems: 1
+
+required:
+ - dma-coherent
+ - num-lanes
+ - interrupts
+ - interrupt-names
+ - interrupt-parent
+ - interrupt-map-mask
+ - interrupt-map
+ - clock-names
+ - clocks
+ - resets
+ - pwren-gpios
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ bus {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #include <dt-bindings/clock/sifive-fu740-prci.h>
+
+ pcie@e00000000 {
+ compatible = "sifive,fu740-pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ reg = <0xe 0x00000000 0x0 0x80000000>,
+ <0xd 0xf0000000 0x0 0x10000000>,
+ <0x0 0x100d0000 0x0 0x1000>;
+ reg-names = "dbi", "config", "mgmt";
+ device_type = "pci";
+ dma-coherent;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x60080000 0x0 0x60080000 0x0 0x10000>, /* I/O */
+ <0x82000000 0x0 0x60090000 0x0 0x60090000 0x0 0xff70000>, /* mem */
+ <0x82000000 0x0 0x70000000 0x0 0x70000000 0x0 0x1000000>, /* mem */
+ <0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>; /* mem prefetchable */
+ num-lanes = <0x8>;
+ interrupts = <56>, <57>, <58>, <59>, <60>, <61>, <62>, <63>, <64>;
+ interrupt-names = "msi", "inta", "intb", "intc", "intd";
+ interrupt-parent = <&plic0>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>,
+ <0x0 0x0 0x0 0x2 &plic0 58>,
+ <0x0 0x0 0x0 0x3 &plic0 59>,
+ <0x0 0x0 0x0 0x4 &plic0 60>;
+ clock-names = "pcie_aux";
+ clocks = <&prci PRCI_CLK_PCIE_AUX>;
+ resets = <&prci 4>;
+ pwren-gpios = <&gpio 5 0>;
+ reset-gpios = <&gpio 8 0>;
+ };
+ };
--
2.30.2
next prev parent reply other threads:[~2021-04-01 6:02 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-01 6:00 [PATCH v4 0/6] Add SiFive FU740 PCIe host controller driver support Greentime Hu
2021-04-01 6:00 ` [PATCH v4 1/6] clk: sifive: Add pcie_aux clock in prci driver for PCIe driver Greentime Hu
2021-04-01 6:00 ` [PATCH v4 2/6] clk: sifive: Use reset-simple " Greentime Hu
2021-04-01 6:00 ` [PATCH v4 3/6] MAINTAINERS: Add maintainers for SiFive FU740 " Greentime Hu
2021-04-01 6:00 ` Greentime Hu [this message]
2021-04-01 16:54 ` [PATCH v4 4/6] dt-bindings: PCI: Add SiFive FU740 PCIe host controller Rob Herring
2021-04-01 6:00 ` [PATCH v4 5/6] PCI: fu740: Add SiFive FU740 PCIe host controller driver Greentime Hu
2021-04-01 6:35 ` Krzysztof Wilczyński
2021-04-01 8:51 ` Damien Le Moal
2021-04-01 16:47 ` Rob Herring
2021-04-01 6:00 ` [PATCH v4 6/6] riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC Greentime Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210401060054.40788-5-greentime.hu@sifive.com \
--to=greentime.hu@sifive.com \
--cc=alex.dewar90@gmail.com \
--cc=aou@eecs.berkeley.edu \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=erik.danie@sifive.com \
--cc=hayashi.kunihiko@socionext.com \
--cc=helgaas@kernel.org \
--cc=hes@sifive.com \
--cc=jh80.chung@samsung.com \
--cc=khilman@baylibre.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=vidyas@nvidia.com \
--cc=zong.li@sifive.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).