From: Can Guo <cang@codeaurora.org>
To: asutoshd@codeaurora.org, nguyenb@codeaurora.org,
hongwus@codeaurora.org, linux-scsi@vger.kernel.org,
kernel-team@android.com, cang@codeaurora.org
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Adrian Hunter <adrian.hunter@intel.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Ilya Dryomov <idryomov@gmail.com>,
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
Lukas Bulwahn <lukas.bulwahn@gmail.com>,
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 2/2] scsi: ufs: Add support for hba performance monitor
Date: Wed, 31 Mar 2021 23:11:42 -0700 [thread overview]
Message-ID: <1617257503-669-3-git-send-email-cang@codeaurora.org> (raw)
In-Reply-To: <1617257503-669-1-git-send-email-cang@codeaurora.org>
Add a new sysfs group which has nodes to monitor data/request transfer
performance. This sysfs group has nodes showing total sectors/requests
transferred, total busy time spent and max/min/avg/sum latencies.
Signed-off-by: Can Guo <cang@codeaurora.org>
diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
index d1bc23c..8380866 100644
--- a/Documentation/ABI/testing/sysfs-driver-ufs
+++ b/Documentation/ABI/testing/sysfs-driver-ufs
@@ -995,6 +995,132 @@ Description: This entry shows the target state of an UFS UIC link
The file is read only.
+What: /sys/bus/platform/drivers/ufshcd/*/monitor/monitor_enable
+Date: January 2021
+Contact: Can Guo <cang@codeaurora.org>
+Description: This file shows the status of performance monitor enablement
+ and it can be used to start/stop the monitor. When the monitor
+ is stopped, the performance data collected is also cleared.
+
+What: /sys/bus/platform/drivers/ufshcd/*/monitor/monitor_chunk_size
+Date: January 2021
+Contact: Can Guo <cang@codeaurora.org>
+Description: This file tells the monitor to focus on requests transferring
+ data of specific chunk size (in Bytes). 0 means any chunk size.
+ It can only be changed when monitor is disabled.
+
+What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_total_sectors
+Date: January 2021
+Contact: Can Guo <cang@codeaurora.org>
+Description: This file shows how many sectors (in 512 Bytes) have been
+ sent from device to host after monitor gets started.
+
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_total_busy
+Date: January 2021
+Contact: Can Guo <cang@codeaurora.org>
+Description: This file shows how long (in micro seconds) has been spent
+ sending data from device to host after monitor gets started.
+
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_nr_requests
+Date: January 2021
+Contact: Can Guo <cang@codeaurora.org>
+Description: This file shows how many read requests have been sent after
+ monitor gets started.
+
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_max
+Date: January 2021
+Contact: Can Guo <cang@codeaurora.org>
+Description: This file shows the maximum latency (in micro seconds) of
+ read requests after monitor gets started.
+
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_min
+Date: January 2021
+Contact: Can Guo <cang@codeaurora.org>
+Description: This file shows the minimum latency (in micro seconds) of
+ read requests after monitor gets started.
+
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_avg
+Date: January 2021
+Contact: Can Guo <cang@codeaurora.org>
+Description: This file shows the average latency (in micro seconds) of
+ read requests after monitor gets started.
+
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_sum
+Date: January 2021
+Contact: Can Guo <cang@codeaurora.org>
+Description: This file shows the total latency (in micro seconds) of
+ read requests sent after monitor gets started.
+
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_total_sectors
+Date: January 2021
+Contact: Can Guo <cang@codeaurora.org>
+Description: This file shows how many sectors (in 512 Bytes) have been sent
+ from host to device after monitor gets started.
+
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_total_busy
+Date: January 2021
+Contact: Can Guo <cang@codeaurora.org>
+Description: This file shows how long (in micro seconds) has been spent
+ sending data from host to device after monitor gets started.
+
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_nr_requests
+Date: January 2021
+Contact: Can Guo <cang@codeaurora.org>
+Description: This file shows how many write requests have been sent after
+ monitor gets started.
+
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_max
+Date: January 2021
+Contact: Can Guo <cang@codeaurora.org>
+Description: This file shows the maximum latency (in micro seconds) of write
+ requests after monitor gets started.
+
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_min
+Date: January 2021
+Contact: Can Guo <cang@codeaurora.org>
+Description: This file shows the minimum latency (in micro seconds) of write
+ requests after monitor gets started.
+
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_avg
+Date: January 2021
+Contact: Can Guo <cang@codeaurora.org>
+Description: This file shows the average latency (in micro seconds) of write
+ requests after monitor gets started.
+
+ The file is read only.
+
+What: /sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_sum
+Date: January 2021
+Contact: Can Guo <cang@codeaurora.org>
+Description: This file shows the total latency (in micro seconds) of write
+ requests after monitor gets started.
+
+ The file is read only.
+
What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en
Date: June 2020
Contact: Asutosh Das <asutoshd@codeaurora.org>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2021-04-01 6:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1617257503-669-1-git-send-email-cang@codeaurora.org>
2021-04-01 6:11 ` [PATCH 1/2] scsi: ufs: Introduce hba performance monitor sysfs nodes Can Guo
2021-04-01 6:11 ` Can Guo [this message]
[not found] <1617257704-1154-1-git-send-email-cang@codeaurora.org>
2021-04-01 6:15 ` [PATCH 2/2] scsi: ufs: Add support for hba performance monitor Can Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1617257503-669-3-git-send-email-cang@codeaurora.org \
--to=cang@codeaurora.org \
--cc=Jonathan.Cameron@huawei.com \
--cc=adrian.hunter@intel.com \
--cc=asutoshd@codeaurora.org \
--cc=hongwus@codeaurora.org \
--cc=idryomov@gmail.com \
--cc=kernel-team@android.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=lukas.bulwahn@gmail.com \
--cc=martin.petersen@oracle.com \
--cc=mchehab+huawei@kernel.org \
--cc=nguyenb@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).