[v8,9/9] bus: mhi: Improve documentation on channel transfer setup APIs
diff mbox series

Message ID 1617311778-1254-10-git-send-email-bbhatt@codeaurora.org
State Accepted
Commit 6731fefd95671575ceaba8e1c60881d529537352
Headers show
Series
  • [v8,1/9] bus: mhi: core: Allow sending the STOP channel command
Related show

Commit Message

Bhaumik Bhatt April 1, 2021, 9:16 p.m. UTC
The mhi_prepare_for_transfer() and mhi_unprepare_from_transfer()
APIs could use better explanation. Add details on what MHI does
when these APIs are used.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 include/linux/mhi.h | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

Comments

Jeffrey Hugo May 4, 2021, 5:51 p.m. UTC | #1
On 4/1/2021 3:16 PM, Bhaumik Bhatt wrote:
> The mhi_prepare_for_transfer() and mhi_unprepare_from_transfer()
> APIs could use better explanation. Add details on what MHI does
> when these APIs are used.
> 
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---

Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>

Patch
diff mbox series

diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index b16afd3..43a66e1 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -714,13 +714,27 @@  int mhi_device_get_sync(struct mhi_device *mhi_dev);
 void mhi_device_put(struct mhi_device *mhi_dev);
 
 /**
- * mhi_prepare_for_transfer - Setup channel for data transfer
+ * mhi_prepare_for_transfer - Setup UL and DL channels for data transfer.
+ *                            Allocate and initialize the channel context and
+ *                            also issue the START channel command to both
+ *                            channels. Channels can be started only if both
+ *                            host and device execution environments match and
+ *                            channels are in a DISABLED state.
  * @mhi_dev: Device associated with the channels
  */
 int mhi_prepare_for_transfer(struct mhi_device *mhi_dev);
 
 /**
- * mhi_unprepare_from_transfer - Unprepare the channels
+ * mhi_unprepare_from_transfer - Reset UL and DL channels for data transfer.
+ *                               Issue the RESET channel command and let the
+ *                               device clean-up the context so no incoming
+ *                               transfers are seen on the host. Free memory
+ *                               associated with the context on host. If device
+ *                               is unresponsive, only perform a host side
+ *                               clean-up. Channels can be reset only if both
+ *                               host and device execution environments match
+ *                               and channels are in an ENABLED, STOPPED or
+ *                               SUSPENDED state.
  * @mhi_dev: Device associated with the channels
  */
 void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev);