[v8,1/9] bus: mhi: core: Allow sending the STOP channel command
diff mbox series

Message ID 1617311778-1254-2-git-send-email-bbhatt@codeaurora.org
State Accepted
Commit 5a62e39b45b585726e0dcbf383bfc70dc9f07637
Headers show
Series
  • [v8,1/9] bus: mhi: core: Allow sending the STOP channel command
Related show

Commit Message

Bhaumik Bhatt April 1, 2021, 9:16 p.m. UTC
Add support to allow sending the STOP channel command. If a
client driver would like to STOP a channel and have the device
retain the channel context instead of issuing a RESET to it and
clearing the context, this would provide support for it after
the ability to send this command is exposed to clients.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/bus/mhi/core/main.c | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Jeffrey Hugo May 4, 2021, 5:40 p.m. UTC | #1
On 4/1/2021 3:16 PM, Bhaumik Bhatt wrote:
> Add support to allow sending the STOP channel command. If a
> client driver would like to STOP a channel and have the device
> retain the channel context instead of issuing a RESET to it and
> clearing the context, this would provide support for it after
> the ability to send this command is exposed to clients.
> 
> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---

Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>

Patch
diff mbox series

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index 58b8111..8c510f1 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -1208,6 +1208,11 @@  int mhi_send_cmd(struct mhi_controller *mhi_cntrl,
 		cmd_tre->dword[0] = MHI_TRE_CMD_RESET_DWORD0;
 		cmd_tre->dword[1] = MHI_TRE_CMD_RESET_DWORD1(chan);
 		break;
+	case MHI_CMD_STOP_CHAN:
+		cmd_tre->ptr = MHI_TRE_CMD_STOP_PTR;
+		cmd_tre->dword[0] = MHI_TRE_CMD_STOP_DWORD0;
+		cmd_tre->dword[1] = MHI_TRE_CMD_STOP_DWORD1(chan);
+		break;
 	case MHI_CMD_START_CHAN:
 		cmd_tre->ptr = MHI_TRE_CMD_START_PTR;
 		cmd_tre->dword[0] = MHI_TRE_CMD_START_DWORD0;