From: Bhaumik Bhatt <bbhatt@codeaurora.org>
To: manivannan.sadhasivam@linaro.org
Cc: linux-arm-msm@vger.kernel.org, hemantk@codeaurora.org,
jhugo@codeaurora.org, linux-kernel@vger.kernel.org,
carl.yin@quectel.com, loic.poulain@linaro.org,
kvalo@codeaurora.org, Bhaumik Bhatt <bbhatt@codeaurora.org>
Subject: [RESEND PATCH] bus: mhi: core: Remove pre_init flag used for power purposes
Date: Thu, 1 Apr 2021 14:41:49 -0700 [thread overview]
Message-ID: <1617313309-24035-1-git-send-email-bbhatt@codeaurora.org> (raw)
Some controllers can choose to skip preparation for power up.
In that case, device context is initialized based on the pre_init
flag not being set during mhi_prepare_for_power_up(). There is no
reason MHI host driver should maintain and provide controllers
with two separate paths for preparing MHI.
Going forward, all controllers will be required to call the
mhi_prepare_for_power_up() API followed by their choice of sync
or async power up. This allows MHI host driver to get rid of the
pre_init flag and sets up a common way for all controllers to use
MHI. This also helps controllers fail early on during preparation
phase in some failure cases.
Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
This patch was tested on arm64 architecture.
drivers/bus/mhi/core/init.c | 3 ---
drivers/bus/mhi/core/pm.c | 20 --------------------
include/linux/mhi.h | 2 --
3 files changed, 25 deletions(-)
diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index d1d9b0d..1f61352 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -1080,8 +1080,6 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
mhi_rddm_prepare(mhi_cntrl, mhi_cntrl->rddm_image);
}
- mhi_cntrl->pre_init = true;
-
mutex_unlock(&mhi_cntrl->pm_mutex);
return 0;
@@ -1112,7 +1110,6 @@ void mhi_unprepare_after_power_down(struct mhi_controller *mhi_cntrl)
}
mhi_deinit_dev_ctxt(mhi_cntrl);
- mhi_cntrl->pre_init = false;
}
EXPORT_SYMBOL_GPL(mhi_unprepare_after_power_down);
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index e4aff77..b23eec5 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -1062,13 +1062,6 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
mutex_lock(&mhi_cntrl->pm_mutex);
mhi_cntrl->pm_state = MHI_PM_DISABLE;
- if (!mhi_cntrl->pre_init) {
- /* Setup device context */
- ret = mhi_init_dev_ctxt(mhi_cntrl);
- if (ret)
- goto error_dev_ctxt;
- }
-
ret = mhi_init_irq_setup(mhi_cntrl);
if (ret)
goto error_setup_irq;
@@ -1150,10 +1143,6 @@ int mhi_async_power_up(struct mhi_controller *mhi_cntrl)
mhi_deinit_free_irq(mhi_cntrl);
error_setup_irq:
- if (!mhi_cntrl->pre_init)
- mhi_deinit_dev_ctxt(mhi_cntrl);
-
-error_dev_ctxt:
mhi_cntrl->pm_state = MHI_PM_DISABLE;
mutex_unlock(&mhi_cntrl->pm_mutex);
@@ -1203,15 +1192,6 @@ void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful)
flush_work(&mhi_cntrl->st_worker);
free_irq(mhi_cntrl->irq[0], mhi_cntrl);
-
- if (!mhi_cntrl->pre_init) {
- /* Free all allocated resources */
- if (mhi_cntrl->fbc_image) {
- mhi_free_bhie_table(mhi_cntrl, mhi_cntrl->fbc_image);
- mhi_cntrl->fbc_image = NULL;
- }
- mhi_deinit_dev_ctxt(mhi_cntrl);
- }
}
EXPORT_SYMBOL_GPL(mhi_power_down);
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index b16afd3..c9b36a3 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -354,7 +354,6 @@ struct mhi_controller_config {
* @index: Index of the MHI controller instance
* @bounce_buf: Use of bounce buffer
* @fbc_download: MHI host needs to do complete image transfer (optional)
- * @pre_init: MHI host needs to do pre-initialization before power up
* @wake_set: Device wakeup set flag
* @irq_flags: irq flags passed to request_irq (optional)
*
@@ -447,7 +446,6 @@ struct mhi_controller {
int index;
bool bounce_buf;
bool fbc_download;
- bool pre_init;
bool wake_set;
unsigned long irq_flags;
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next reply other threads:[~2021-04-01 21:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-01 21:41 Bhaumik Bhatt [this message]
2021-04-02 18:20 ` [RESEND PATCH] bus: mhi: core: Remove pre_init flag used for power purposes Hemant Kumar
2021-04-07 5:07 ` Manivannan Sadhasivam
2021-05-04 17:33 ` Jeffrey Hugo
2021-04-07 6:50 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1617313309-24035-1-git-send-email-bbhatt@codeaurora.org \
--to=bbhatt@codeaurora.org \
--cc=carl.yin@quectel.com \
--cc=hemantk@codeaurora.org \
--cc=jhugo@codeaurora.org \
--cc=kvalo@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=manivannan.sadhasivam@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).