linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Russell King <linux@armlinux.org.uk>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-mips@vger.kernel.org
Subject: [PATCH net-next v1 6/9] net: dsa: qca: ar9331: add ageing time support
Date: Sat,  3 Apr 2021 13:48:45 +0200	[thread overview]
Message-ID: <20210403114848.30528-7-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20210403114848.30528-1-o.rempel@pengutronix.de>

This switch provides global ageing time configuration, so let DSA use
it.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/qca/ar9331.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/net/dsa/qca/ar9331.c b/drivers/net/dsa/qca/ar9331.c
index 4a98f14f31f4..b2c22ba924f0 100644
--- a/drivers/net/dsa/qca/ar9331.c
+++ b/drivers/net/dsa/qca/ar9331.c
@@ -1115,6 +1115,25 @@ static void ar9331_sw_port_fast_age(struct dsa_switch *ds, int port)
 	dev_err_ratelimited(priv->dev, "%s: error: %i\n", __func__, ret);
 }
 
+static int ar9331_sw_set_ageing_time(struct dsa_switch *ds,
+				     unsigned int ageing_time)
+{
+	struct ar9331_sw_priv *priv = (struct ar9331_sw_priv *)ds->priv;
+	struct regmap *regmap = priv->regmap;
+	u32 time, val;
+
+	time = DIV_ROUND_UP(ageing_time, AR9331_SW_AT_AGE_TIME_COEF);
+	if (!time)
+		time = 1;
+	else if (time > U16_MAX)
+		time = U16_MAX;
+
+	val = FIELD_PREP(AR9331_SW_AT_AGE_TIME, time) | AR9331_SW_AT_AGE_EN;
+	return regmap_update_bits(regmap, AR9331_SW_REG_ADDR_TABLE_CTRL,
+				  AR9331_SW_AT_AGE_EN | AR9331_SW_AT_AGE_TIME,
+				  val);
+}
+
 static const struct dsa_switch_ops ar9331_sw_ops = {
 	.get_tag_protocol	= ar9331_sw_get_tag_protocol,
 	.setup			= ar9331_sw_setup,
@@ -1130,6 +1149,7 @@ static const struct dsa_switch_ops ar9331_sw_ops = {
 	.port_fdb_dump		= ar9331_sw_port_fdb_dump,
 	.port_mdb_add           = ar9331_sw_port_mdb_add,
 	.port_mdb_del           = ar9331_sw_port_mdb_del,
+	.set_ageing_time	= ar9331_sw_set_ageing_time,
 };
 
 static irqreturn_t ar9331_sw_irq(int irq, void *data)
@@ -1476,6 +1496,8 @@ static int ar9331_sw_probe(struct mdio_device *mdiodev)
 	priv->ops = ar9331_sw_ops;
 	ds->ops = &priv->ops;
 	dev_set_drvdata(&mdiodev->dev, priv);
+	ds->ageing_time_min = AR9331_SW_AT_AGE_TIME_COEF;
+	ds->ageing_time_max = AR9331_SW_AT_AGE_TIME_COEF * U16_MAX;
 
 	for (i = 0; i < ARRAY_SIZE(priv->port); i++) {
 		struct ar9331_sw_port *port = &priv->port[i];
-- 
2.29.2


  parent reply	other threads:[~2021-04-03 11:49 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-03 11:48 [PATCH net-next v1 0/9] ar9331: mainline some parts of switch functionality Oleksij Rempel
2021-04-03 11:48 ` [PATCH net-next v1 1/9] net: dsa: add rcv_post call back Oleksij Rempel
2021-04-03 14:05   ` Vladimir Oltean
2021-04-03 23:21     ` Vladimir Oltean
2021-04-04  2:32       ` Florian Fainelli
2021-04-04  5:49       ` Oleksij Rempel
2021-04-04 12:54         ` Vladimir Oltean
2021-04-03 11:48 ` [PATCH net-next v1 2/9] net: dsa: tag_ar9331: detect IGMP and MLD packets Oleksij Rempel
2021-04-03 13:03   ` Vladimir Oltean
2021-04-03 13:26     ` Oleksij Rempel
2021-04-03 13:46       ` Vladimir Oltean
2021-04-03 15:22         ` Oleksij Rempel
2021-04-03 16:38           ` Vladimir Oltean
2021-04-03 14:49   ` Andrew Lunn
2021-04-03 17:14     ` Oleksij Rempel
2021-04-04  0:02       ` Vladimir Oltean
2021-04-04  5:35         ` Oleksij Rempel
2021-04-04 12:58           ` Vladimir Oltean
2021-04-03 11:48 ` [PATCH net-next v1 3/9] net: dsa: qca: ar9331: reorder MDIO write sequence Oleksij Rempel
2021-04-03 14:55   ` Andrew Lunn
2021-04-04  2:17   ` Florian Fainelli
2021-04-03 11:48 ` [PATCH net-next v1 4/9] net: dsa: qca: ar9331: make proper initial port defaults Oleksij Rempel
2021-04-03 15:08   ` Andrew Lunn
2021-04-04  0:16   ` Vladimir Oltean
2021-04-04  6:04     ` Oleksij Rempel
2021-04-03 11:48 ` [PATCH net-next v1 5/9] net: dsa: qca: ar9331: add forwarding database support Oleksij Rempel
2021-04-03 15:25   ` Andrew Lunn
2021-04-03 23:48     ` Vladimir Oltean
2021-04-04  0:46       ` Andrew Lunn
2021-04-03 11:48 ` Oleksij Rempel [this message]
2021-04-03 15:26   ` [PATCH net-next v1 6/9] net: dsa: qca: ar9331: add ageing time support Andrew Lunn
2021-04-04  2:20   ` Florian Fainelli
2021-04-03 11:48 ` [PATCH net-next v1 7/9] net: dsa: qca: ar9331: add bridge support Oleksij Rempel
2021-04-03 15:31   ` Andrew Lunn
2021-04-04  2:26   ` Florian Fainelli
2021-04-03 11:48 ` [PATCH net-next v1 8/9] net: dsa: qca: ar9331: add STP support Oleksij Rempel
2021-04-03 11:48 ` [PATCH net-next v1 9/9] net: dsa: qca: ar9331: add vlan support Oleksij Rempel
2021-04-04  0:36   ` Vladimir Oltean

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210403114848.30528-7-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).