linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Zhiqiang Hou <Zhiqiang.Hou@nxp.com>
To: linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, lorenzo.pieralisi@arm.com,
	robh+dt@kernel.org, bhelgaas@google.com, shawnguo@kernel.org,
	leoyang.li@nxp.com, gustavo.pimentel@synopsys.com
Cc: minghuan.Lian@nxp.com, mingkai.hu@nxp.com, roy.zang@nxp.com,
	Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Subject: [PATCHv4 1/6] PCI: layerscape: Change to use the DWC common link-up check function
Date: Tue,  6 Apr 2021 17:04:44 +0800	[thread overview]
Message-ID: <20210406090449.36352-2-Zhiqiang.Hou@nxp.com> (raw)
In-Reply-To: <20210406090449.36352-1-Zhiqiang.Hou@nxp.com>

From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

The current Layerscape PCIe driver directly uses the physical layer
LTSSM code to check the link-up state, which treats the > L0 states
as link-up. This is not correct, since there is not explicit map
between link-up state and LTSSM. So this patch changes to use the
DWC common link-up check function.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
V4:
 - Rebased against the latest code base

 drivers/pci/controller/dwc/pci-layerscape.c | 140 ++------------------
 1 file changed, 10 insertions(+), 130 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index 5b9c625df7b8..71911ca4c589 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -22,12 +22,6 @@
 
 #include "pcie-designware.h"
 
-/* PEX1/2 Misc Ports Status Register */
-#define SCFG_PEXMSCPORTSR(pex_idx)	(0x94 + (pex_idx) * 4)
-#define LTSSM_STATE_SHIFT	20
-#define LTSSM_STATE_MASK	0x3f
-#define LTSSM_PCIE_L0		0x11 /* L0 state */
-
 /* PEX Internal Configuration Registers */
 #define PCIE_STRFMR1		0x71c /* Symbol Timer & Filter Mask Register1 */
 #define PCIE_ABSERR		0x8d0 /* Bridge Slave Error Response Register */
@@ -36,19 +30,12 @@
 #define PCIE_IATU_NUM		6
 
 struct ls_pcie_drvdata {
-	u32 lut_offset;
-	u32 ltssm_shift;
-	u32 lut_dbg;
 	const struct dw_pcie_host_ops *ops;
-	const struct dw_pcie_ops *dw_pcie_ops;
 };
 
 struct ls_pcie {
 	struct dw_pcie *pci;
-	void __iomem *lut;
-	struct regmap *scfg;
 	const struct ls_pcie_drvdata *drvdata;
-	int index;
 };
 
 #define to_ls_pcie(x)	dev_get_drvdata((x)->dev)
@@ -83,38 +70,6 @@ static void ls_pcie_drop_msg_tlp(struct ls_pcie *pcie)
 	iowrite32(val, pci->dbi_base + PCIE_STRFMR1);
 }
 
-static int ls1021_pcie_link_up(struct dw_pcie *pci)
-{
-	u32 state;
-	struct ls_pcie *pcie = to_ls_pcie(pci);
-
-	if (!pcie->scfg)
-		return 0;
-
-	regmap_read(pcie->scfg, SCFG_PEXMSCPORTSR(pcie->index), &state);
-	state = (state >> LTSSM_STATE_SHIFT) & LTSSM_STATE_MASK;
-
-	if (state < LTSSM_PCIE_L0)
-		return 0;
-
-	return 1;
-}
-
-static int ls_pcie_link_up(struct dw_pcie *pci)
-{
-	struct ls_pcie *pcie = to_ls_pcie(pci);
-	u32 state;
-
-	state = (ioread32(pcie->lut + pcie->drvdata->lut_dbg) >>
-		 pcie->drvdata->ltssm_shift) &
-		 LTSSM_STATE_MASK;
-
-	if (state < LTSSM_PCIE_L0)
-		return 0;
-
-	return 1;
-}
-
 /* Forward error response of outbound non-posted requests */
 static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
 {
@@ -139,96 +94,24 @@ static int ls_pcie_host_init(struct pcie_port *pp)
 	return 0;
 }
 
-static int ls1021_pcie_host_init(struct pcie_port *pp)
-{
-	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
-	struct ls_pcie *pcie = to_ls_pcie(pci);
-	struct device *dev = pci->dev;
-	u32 index[2];
-	int ret;
-
-	pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node,
-						     "fsl,pcie-scfg");
-	if (IS_ERR(pcie->scfg)) {
-		ret = PTR_ERR(pcie->scfg);
-		dev_err(dev, "No syscfg phandle specified\n");
-		pcie->scfg = NULL;
-		return ret;
-	}
-
-	if (of_property_read_u32_array(dev->of_node,
-				       "fsl,pcie-scfg", index, 2)) {
-		pcie->scfg = NULL;
-		return -EINVAL;
-	}
-	pcie->index = index[1];
-
-	return ls_pcie_host_init(pp);
-}
-
-static const struct dw_pcie_host_ops ls1021_pcie_host_ops = {
-	.host_init = ls1021_pcie_host_init,
-};
-
 static const struct dw_pcie_host_ops ls_pcie_host_ops = {
 	.host_init = ls_pcie_host_init,
 };
 
-static const struct dw_pcie_ops dw_ls1021_pcie_ops = {
-	.link_up = ls1021_pcie_link_up,
-};
-
-static const struct dw_pcie_ops dw_ls_pcie_ops = {
-	.link_up = ls_pcie_link_up,
-};
-
-static const struct ls_pcie_drvdata ls1021_drvdata = {
-	.ops = &ls1021_pcie_host_ops,
-	.dw_pcie_ops = &dw_ls1021_pcie_ops,
-};
-
-static const struct ls_pcie_drvdata ls1043_drvdata = {
-	.lut_offset = 0x10000,
-	.ltssm_shift = 24,
-	.lut_dbg = 0x7fc,
+static const struct ls_pcie_drvdata layerscape_drvdata = {
 	.ops = &ls_pcie_host_ops,
-	.dw_pcie_ops = &dw_ls_pcie_ops,
-};
-
-static const struct ls_pcie_drvdata ls1046_drvdata = {
-	.lut_offset = 0x80000,
-	.ltssm_shift = 24,
-	.lut_dbg = 0x407fc,
-	.ops = &ls_pcie_host_ops,
-	.dw_pcie_ops = &dw_ls_pcie_ops,
-};
-
-static const struct ls_pcie_drvdata ls2080_drvdata = {
-	.lut_offset = 0x80000,
-	.ltssm_shift = 0,
-	.lut_dbg = 0x7fc,
-	.ops = &ls_pcie_host_ops,
-	.dw_pcie_ops = &dw_ls_pcie_ops,
-};
-
-static const struct ls_pcie_drvdata ls2088_drvdata = {
-	.lut_offset = 0x80000,
-	.ltssm_shift = 0,
-	.lut_dbg = 0x407fc,
-	.ops = &ls_pcie_host_ops,
-	.dw_pcie_ops = &dw_ls_pcie_ops,
 };
 
 static const struct of_device_id ls_pcie_of_match[] = {
-	{ .compatible = "fsl,ls1012a-pcie", .data = &ls1046_drvdata },
-	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata },
-	{ .compatible = "fsl,ls1028a-pcie", .data = &ls2088_drvdata },
-	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata },
-	{ .compatible = "fsl,ls1046a-pcie", .data = &ls1046_drvdata },
-	{ .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata },
-	{ .compatible = "fsl,ls2085a-pcie", .data = &ls2080_drvdata },
-	{ .compatible = "fsl,ls2088a-pcie", .data = &ls2088_drvdata },
-	{ .compatible = "fsl,ls1088a-pcie", .data = &ls2088_drvdata },
+	{ .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
+	{ .compatible = "fsl,ls1021a-pcie", .data = &layerscape_drvdata },
+	{ .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
+	{ .compatible = "fsl,ls1043a-pcie", .data = &layerscape_drvdata },
+	{ .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
+	{ .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
+	{ .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
+	{ .compatible = "fsl,ls2088a-pcie", .data = &layerscape_drvdata },
+	{ .compatible = "fsl,ls1088a-pcie", .data = &layerscape_drvdata },
 	{ },
 };
 
@@ -250,7 +133,6 @@ static int ls_pcie_probe(struct platform_device *pdev)
 	pcie->drvdata = of_device_get_match_data(dev);
 
 	pci->dev = dev;
-	pci->ops = pcie->drvdata->dw_pcie_ops;
 	pci->pp.ops = pcie->drvdata->ops;
 
 	pcie->pci = pci;
@@ -260,8 +142,6 @@ static int ls_pcie_probe(struct platform_device *pdev)
 	if (IS_ERR(pci->dbi_base))
 		return PTR_ERR(pci->dbi_base);
 
-	pcie->lut = pci->dbi_base + pcie->drvdata->lut_offset;
-
 	if (!ls_pcie_is_bridge(pcie))
 		return -ENODEV;
 
-- 
2.17.1


  reply	other threads:[~2021-04-06  8:58 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-06  9:04 [PATCHv4 0/6] PCI: layerscape: Add power management support Zhiqiang Hou
2021-04-06  9:04 ` Zhiqiang Hou [this message]
2021-04-06  9:04 ` [PATCHv4 2/6] dt-bindings: pci: layerscape-pci: Add a optional property big-endian Zhiqiang Hou
2021-04-06  9:04 ` [PATCHv4 3/6] arm64: dts: layerscape: Add big-endian property for PCIe nodes Zhiqiang Hou
2021-04-06  9:04 ` [PATCHv4 4/6] dt-bindings: pci: layerscape-pci: Update the description of SCFG property Zhiqiang Hou
2021-04-06  9:04 ` [PATCHv4 5/6] arm64: dts: ls1043a: Add SCFG phandle for PCIe nodes Zhiqiang Hou
2021-04-06  9:04 ` [PATCHv4 6/6] PCI: layerscape: Add power management support Zhiqiang Hou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210406090449.36352-2-Zhiqiang.Hou@nxp.com \
    --to=zhiqiang.hou@nxp.com \
    --cc=bhelgaas@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gustavo.pimentel@synopsys.com \
    --cc=leoyang.li@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=minghuan.Lian@nxp.com \
    --cc=mingkai.hu@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=roy.zang@nxp.com \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).