[PATCHv5,5/6] arm64: dts: ls1043a: Add SCFG phandle for PCIe nodes
diff mbox series

Message ID 20210407030948.3845-6-Zhiqiang.Hou@nxp.com
State New, archived
Headers show
Series
  • PCI: layerscape: Add power management support
Related show

Commit Message

Z.q. Hou April 7, 2021, 3:09 a.m. UTC
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

The LS1043A PCIe controller has some control registers
in SCFG block, so add the SCFG phandle for each PCIe
controller DT node.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
---
V5:
 - No change

 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 3 +++
 1 file changed, 3 insertions(+)

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 46826752a691..704e9e249729 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -875,6 +875,7 @@ 
 			interrupts = <0 118 0x4>, /* controller interrupt */
 				     <0 117 0x4>; /* PME interrupt */
 			interrupt-names = "intr", "pme";
+			fsl,pcie-scfg = <&scfg 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -902,6 +903,7 @@ 
 			interrupts = <0 128 0x4>,
 				     <0 127 0x4>;
 			interrupt-names = "intr", "pme";
+			fsl,pcie-scfg = <&scfg 1>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";
@@ -929,6 +931,7 @@ 
 			interrupts = <0 162 0x4>,
 				     <0 161 0x4>;
 			interrupt-names = "intr", "pme";
+			fsl,pcie-scfg = <&scfg 2>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 			device_type = "pci";