[PATCH 13/24] USB: serial: ti_usb_3410_5052: fix TIOCGSERIAL implementation

From: Johan Hovold <johan@kernel.org>
To: Johan Hovold <johan@kernel.org>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 13/24] USB: serial: ti_usb_3410_5052: fix TIOCGSERIAL implementation
Date: Wed,  7 Apr 2021 12:39:14 +0200	[thread overview]
Message-ID: <20210407103925.829-14-johan@kernel.org> (raw)
In-Reply-To: <20210407103925.829-1-johan@kernel.org>

TIOCSSERIAL is a horrid, underspecified, legacy interface which for most
serial devices is only useful for setting the close_delay and
closing_wait parameters.

The port parameter is used to set the I/O port and does not make any
sense to use for USB serial devices.

The xmit_fifo_size parameter could be used to set the hardware transmit
fifo size of a legacy UART when it could not be detected, but the
interface is limited to eight bits and should be left unset when not
used.

The close_delay and closing_wait parameters returned by TIOCGSERIAL are
specified in centiseconds. The driver does not yet support changing
close_delay, but let's report back the default value actually used (0.5
seconds).

Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/serial/ti_usb_3410_5052.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 7252b0ce75a6..4b497c1e850b 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1406,10 +1406,10 @@ static int ti_get_serial_info(struct tty_struct *tty,
 
 	ss->type = PORT_16550A;
 	ss->line = port->minor;
-	ss->port = port->port_number;
-	ss->xmit_fifo_size = kfifo_size(&port->write_fifo);
 	ss->baud_base = tport->tp_tdev->td_is_3410 ? 921600 : 460800;
+	ss->close_delay = 50;
 	ss->closing_wait = cwait;
+
 	return 0;
 }
 
-- 
2.26.3

