From: Johan Hovold <johan@kernel.org>
To: Johan Hovold <johan@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
Manivannan Sadhasivam <mani@kernel.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 01/12] USB: serial: xr: add support for XR21V1412 and XR21V1414
Date: Mon, 12 Apr 2021 11:55:46 +0200 [thread overview]
Message-ID: <20210412095557.1213-2-johan@kernel.org> (raw)
In-Reply-To: <20210412095557.1213-1-johan@kernel.org>
Add support for the two- and four-port variants of XR21V1410.
Use the interface number of each control interface (e.g. 0, 2, 4, 6) to
derive the zero-based channel index:
XR21V1410 0
XR21V1412 0, 1
XR21V1414 0, 1, 2, 3
Note that the UART registers reside in separate blocks per channel,
while the UART Manager functionality is implemented using per-channel
registers.
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/serial/xr_serial.c | 55 +++++++++++++++++++++++++++++++---
1 file changed, 51 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c
index 88c73f88cb26..64bc9d7b948b 100644
--- a/drivers/usb/serial/xr_serial.c
+++ b/drivers/usb/serial/xr_serial.c
@@ -109,6 +109,10 @@ struct xr_txrx_clk_mask {
#define XR21V141X_REG_GPIO_CLR 0x1e
#define XR21V141X_REG_GPIO_STATUS 0x1f
+struct xr_data {
+ u8 channel; /* zero-based index */
+};
+
static int xr_set_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 val)
{
struct usb_serial *serial = port->serial;
@@ -160,16 +164,31 @@ static int xr_get_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 *val)
static int xr_set_reg_uart(struct usb_serial_port *port, u8 reg, u8 val)
{
- return xr_set_reg(port, XR21V141X_UART_REG_BLOCK, reg, val);
+ struct xr_data *data = usb_get_serial_port_data(port);
+ u8 block;
+
+ block = XR21V141X_UART_REG_BLOCK + data->channel;
+
+ return xr_set_reg(port, block, reg, val);
}
static int xr_get_reg_uart(struct usb_serial_port *port, u8 reg, u8 *val)
{
- return xr_get_reg(port, XR21V141X_UART_REG_BLOCK, reg, val);
+ struct xr_data *data = usb_get_serial_port_data(port);
+ u8 block;
+
+ block = XR21V141X_UART_REG_BLOCK + data->channel;
+
+ return xr_get_reg(port, block, reg, val);
}
-static int xr_set_reg_um(struct usb_serial_port *port, u8 reg, u8 val)
+static int xr_set_reg_um(struct usb_serial_port *port, u8 reg_base, u8 val)
{
+ struct xr_data *data = usb_get_serial_port_data(port);
+ u8 reg;
+
+ reg = reg_base + data->channel;
+
return xr_set_reg(port, XR21V141X_UM_REG_BLOCK, reg, val);
}
@@ -577,8 +596,34 @@ static int xr_probe(struct usb_serial *serial, const struct usb_device_id *id)
return 0;
}
+static int xr_port_probe(struct usb_serial_port *port)
+{
+ struct usb_interface_descriptor *desc;
+ struct xr_data *data;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ desc = &port->serial->interface->cur_altsetting->desc;
+ data->channel = desc->bInterfaceNumber / 2;
+
+ usb_set_serial_port_data(port, data);
+
+ return 0;
+}
+
+static void xr_port_remove(struct usb_serial_port *port)
+{
+ struct xr_data *data = usb_get_serial_port_data(port);
+
+ kfree(data);
+}
+
static const struct usb_device_id id_table[] = {
- { USB_DEVICE_INTERFACE_CLASS(0x04e2, 0x1410, USB_CLASS_COMM) }, /* XR21V141X */
+ { USB_DEVICE_INTERFACE_CLASS(0x04e2, 0x1410, USB_CLASS_COMM) }, /* XR21V1410 */
+ { USB_DEVICE_INTERFACE_CLASS(0x04e2, 0x1412, USB_CLASS_COMM) }, /* XR21V1412 */
+ { USB_DEVICE_INTERFACE_CLASS(0x04e2, 0x1414, USB_CLASS_COMM) }, /* XR21V1414 */
{ }
};
MODULE_DEVICE_TABLE(usb, id_table);
@@ -591,6 +636,8 @@ static struct usb_serial_driver xr_device = {
.id_table = id_table,
.num_ports = 1,
.probe = xr_probe,
+ .port_probe = xr_port_probe,
+ .port_remove = xr_port_remove,
.open = xr_open,
.close = xr_close,
.break_ctl = xr_break_ctl,
--
2.26.3
next prev parent reply other threads:[~2021-04-12 10:03 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-12 9:55 [PATCH RESEND 00/12] USB: serial: xr: add support for more device types Johan Hovold
2021-04-12 9:55 ` Johan Hovold [this message]
2021-04-12 9:55 ` [PATCH 02/12] USB: serial: xr: rename GPIO-mode defines Johan Hovold
2021-04-12 9:55 ` [PATCH 03/12] USB: serial: xr: rename GPIO-pin defines Johan Hovold
2021-04-12 9:55 ` [PATCH 04/12] USB: serial: xr: move pin configuration to probe Johan Hovold
2021-04-12 9:55 ` [PATCH 05/12] USB: serial: xr: drop type prefix from shared defines Johan Hovold
2021-04-12 9:55 ` [PATCH 06/12] USB: serial: xr: add type abstraction Johan Hovold
2021-04-12 9:55 ` [PATCH 07/12] USB: serial: xr: add support for XR21B1421, XR21B1422 and XR21B1424 Johan Hovold
2021-04-12 9:55 ` [PATCH 08/12] USB: serial: xr: add support for XR21B1411 Johan Hovold
2021-04-12 9:55 ` [PATCH 09/12] USB: serial: xr: add support for XR22801, XR22802, XR22804 Johan Hovold
2021-04-12 9:55 ` [PATCH 10/12] USB: serial: xr: reset FIFOs on open Johan Hovold
2021-04-12 9:55 ` [PATCH 11/12] USB: serial: xr: add copyright notice Johan Hovold
2021-04-12 9:55 ` [PATCH 12/12] USB: cdc-acm: add more Maxlinear/Exar models to ignore list Johan Hovold
2021-04-12 11:00 ` Greg KH
-- strict thread matches above, loose matches on Subject: below --
2021-03-30 14:39 [PATCH 00/12] USB: serial: xr: add support for more device types Johan Hovold
2021-03-30 14:39 ` [PATCH 01/12] USB: serial: xr: add support for XR21V1412 and XR21V1414 Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210412095557.1213-2-johan@kernel.org \
--to=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mani@kernel.org \
--cc=mchehab+huawei@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).