From: Yang Li <yang.lee@linux.alibaba.com>
To: jejb@linux.ibm.com
Cc: martin.petersen@oracle.com, linux-scsi@vger.kernel.org,
linux-kernel@vger.kernel.org,
Yang Li <yang.lee@linux.alibaba.com>
Subject: [PATCH v2] scsi: aha1542: remove unneeded semicolon
Date: Tue, 13 Apr 2021 11:17:18 +0800 [thread overview]
Message-ID: <1618283838-103057-1-git-send-email-yang.lee@linux.alibaba.com> (raw)
Eliminate the following coccicheck warning:
./drivers/scsi/aha1542.c:297:2-3: Unneeded semicolon
./drivers/scsi/aha1542.c:339:3-4: Unneeded semicolon
./drivers/scsi/aha1542.c:404:2-3: Unneeded semicolon
./drivers/scsi/aha1542.c:505:3-4: Unneeded semicolon
./drivers/scsi/aha1542.c:516:2-3: Unneeded semicolon
./drivers/scsi/aha1542.c:551:2-3: Unneeded semicolon
./drivers/scsi/aha1542.c:566:2-3: Unneeded semicolon
./drivers/scsi/aha1542.c:595:2-3: Unneeded semicolon
./drivers/scsi/aha1542.c:618:2-3: Unneeded semicolon
./drivers/scsi/aha1542.c:653:2-3: Unneeded semicolon
./drivers/scsi/aha1542.c:671:2-3: Unneeded semicolon
./drivers/scsi/aha1542.c:690:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
---
Changes in v2:
--One patch per driver
drivers/scsi/aha1542.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c
index 21aab9f..634f6ab 100644
--- a/drivers/scsi/aha1542.c
+++ b/drivers/scsi/aha1542.c
@@ -297,7 +297,7 @@ static irqreturn_t aha1542_interrupt(int irq, void *dev_id)
if (flag & SCRD)
printk("SCRD ");
printk("status %02x\n", inb(STATUS(sh->io_port)));
- };
+ }
#endif
number_serviced = 0;
@@ -339,7 +339,7 @@ static irqreturn_t aha1542_interrupt(int irq, void *dev_id)
if (!number_serviced)
shost_printk(KERN_WARNING, sh, "interrupt received, but no mail.\n");
return IRQ_HANDLED;
- };
+ }
mbo = (scsi2int(mb[mbi].ccbptr) - (unsigned long)aha1542->ccb_handle) / sizeof(struct ccb);
mbistatus = mb[mbi].status;
@@ -404,7 +404,7 @@ static irqreturn_t aha1542_interrupt(int irq, void *dev_id)
*/
my_done(tmp_cmd);
number_serviced++;
- };
+ }
}
static int aha1542_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
@@ -505,7 +505,7 @@ static int aha1542_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
scsi_for_each_sg(cmd, sg, sg_count, i) {
any2scsi(acmd->chain[i].dataptr, sg_dma_address(sg));
any2scsi(acmd->chain[i].datalen, sg_dma_len(sg));
- };
+ }
any2scsi(ccb[mbo].datalen, sg_count * sizeof(struct chain));
any2scsi(ccb[mbo].dataptr, acmd->chain_handle);
#ifdef DEBUG
@@ -516,7 +516,7 @@ static int aha1542_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
ccb[mbo].op = 0; /* SCSI Initiator Command */
any2scsi(ccb[mbo].datalen, 0);
any2scsi(ccb[mbo].dataptr, 0);
- };
+ }
ccb[mbo].idlun = (target & 7) << 5 | direction | (lun & 7); /*SCSI Target Id */
ccb[mbo].rsalen = 16;
ccb[mbo].linkptr[0] = ccb[mbo].linkptr[1] = ccb[mbo].linkptr[2] = 0;
@@ -551,7 +551,7 @@ static void setup_mailboxes(struct Scsi_Host *sh)
any2scsi(aha1542->mb[i].ccbptr,
aha1542->ccb_handle + i * sizeof(struct ccb));
aha1542->mb[AHA1542_MAILBOXES + i].status = 0;
- };
+ }
aha1542_intr_reset(sh->io_port); /* reset interrupts, so they don't block */
any2scsi(mb_cmd + 2, aha1542->mb_handle);
if (aha1542_out(sh->io_port, mb_cmd, 5))
@@ -566,7 +566,7 @@ static int aha1542_getconfig(struct Scsi_Host *sh)
i = inb(STATUS(sh->io_port));
if (i & DF) {
i = inb(DATA(sh->io_port));
- };
+ }
aha1542_outb(sh->io_port, CMD_RETCONF);
aha1542_in(sh->io_port, inquiry_result, 3, 0);
if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 0))
@@ -595,7 +595,7 @@ static int aha1542_getconfig(struct Scsi_Host *sh)
default:
shost_printk(KERN_ERR, sh, "Unable to determine DMA channel.\n");
return -1;
- };
+ }
switch (inquiry_result[1]) {
case 0x40:
sh->irq = 15;
@@ -618,7 +618,7 @@ static int aha1542_getconfig(struct Scsi_Host *sh)
default:
shost_printk(KERN_ERR, sh, "Unable to determine IRQ level.\n");
return -1;
- };
+ }
sh->this_id = inquiry_result[2] & 7;
return 0;
}
@@ -653,7 +653,7 @@ static int aha1542_mbenable(struct Scsi_Host *sh)
if (aha1542_out(sh->io_port, mbenable_cmd, 3))
goto fail;
- };
+ }
while (0) {
fail:
shost_printk(KERN_ERR, sh, "Mailbox init failed\n");
@@ -671,7 +671,7 @@ static int aha1542_query(struct Scsi_Host *sh)
i = inb(STATUS(sh->io_port));
if (i & DF) {
i = inb(DATA(sh->io_port));
- };
+ }
aha1542_outb(sh->io_port, CMD_INQUIRY);
aha1542_in(sh->io_port, inquiry_result, 4, 0);
if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 0))
@@ -690,7 +690,7 @@ static int aha1542_query(struct Scsi_Host *sh)
if (inquiry_result[0] == 0x43) {
shost_printk(KERN_INFO, sh, "Emulation mode not supported for AHA-1740 hardware, use aha1740 driver instead.\n");
return 1;
- };
+ }
/*
* Always call this - boards that do not support extended bios translation
--
1.8.3.1
reply other threads:[~2021-04-13 3:17 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1618283838-103057-1-git-send-email-yang.lee@linux.alibaba.com \
--to=yang.lee@linux.alibaba.com \
--cc=jejb@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).