linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
To: Felipe Balbi <balbi@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: John Youn <John.Youn@synopsys.com>,
	Artur Petrosyan <Arthur.Petrosyan@synopsys.com>,
	Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Subject: [PATCH v2 01/12] usb: dwc2: Add device clock gating support functions
Date: Tue, 13 Apr 2021 11:36:07 +0400	[thread overview]
Message-ID: <20210413073607.F41E8A0094@mailhost.synopsys.com> (raw)
In-Reply-To: <cover.1618297800.git.Arthur.Petrosyan@synopsys.com>

Added device clock gating support functions according
programming guide.

Moved "bus_suspended" flag to "dwc2_hsotg" struct because
we need to set that flag while entering to clock gating
in case when the driver is built in peripheral mode.

Added function names:
dwc2_gadget_enter_clock_gating()
dwc2_gadget_exit_clock_gating()

Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
---
 drivers/usb/dwc2/core.h   | 10 ++++--
 drivers/usb/dwc2/gadget.c | 71 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 5a7850482e57..e5597796dca4 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -866,6 +866,7 @@ struct dwc2_hregs_backup {
  * @ll_hw_enabled:	Status of low-level hardware resources.
  * @hibernated:		True if core is hibernated
  * @in_ppd:		True if core is partial power down mode.
+ * @bus_suspended:	True if bus is suspended
  * @reset_phy_on_wake:	Quirk saying that we should assert PHY reset on a
  *			remote wakeup.
  * @phy_off_for_suspend: Status of whether we turned the PHY off at suspend.
@@ -1023,7 +1024,6 @@ struct dwc2_hregs_backup {
  *			a pointer to an array of register definitions, the
  *			array size and the base address where the register bank
  *			is to be found.
- * @bus_suspended:	True if bus is suspended
  * @last_frame_num:	Number of last frame. Range from 0 to  32768
  * @frame_num_array:    Used only  if CONFIG_USB_DWC2_TRACK_MISSED_SOFS is
  *			defined, for missed SOFs tracking. Array holds that
@@ -1062,6 +1062,7 @@ struct dwc2_hsotg {
 	unsigned int ll_hw_enabled:1;
 	unsigned int hibernated:1;
 	unsigned int in_ppd:1;
+	bool bus_suspended;
 	unsigned int reset_phy_on_wake:1;
 	unsigned int need_phy_for_wake:1;
 	unsigned int phy_off_for_suspend:1;
@@ -1145,7 +1146,6 @@ struct dwc2_hsotg {
 	unsigned long hs_periodic_bitmap[
 		DIV_ROUND_UP(DWC2_HS_SCHEDULE_US, BITS_PER_LONG)];
 	u16 periodic_qh_count;
-	bool bus_suspended;
 	bool new_connection;
 
 	u16 last_frame_num;
@@ -1415,6 +1415,9 @@ int dwc2_gadget_exit_hibernation(struct dwc2_hsotg *hsotg,
 int dwc2_gadget_enter_partial_power_down(struct dwc2_hsotg *hsotg);
 int dwc2_gadget_exit_partial_power_down(struct dwc2_hsotg *hsotg,
 					bool restore);
+void dwc2_gadget_enter_clock_gating(struct dwc2_hsotg *hsotg);
+void dwc2_gadget_exit_clock_gating(struct dwc2_hsotg *hsotg,
+				   int rem_wakeup);
 int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg);
 int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg);
 int dwc2_hsotg_tx_fifo_average_depth(struct dwc2_hsotg *hsotg);
@@ -1453,6 +1456,9 @@ static inline int dwc2_gadget_enter_partial_power_down(struct dwc2_hsotg *hsotg)
 static inline int dwc2_gadget_exit_partial_power_down(struct dwc2_hsotg *hsotg,
 						      bool restore)
 { return 0; }
+static inline void dwc2_gadget_enter_clock_gating(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_gadget_exit_clock_gating(struct dwc2_hsotg *hsotg,
+						 int rem_wakeup) {}
 static inline int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg)
 { return 0; }
 static inline int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index e08baee4987b..2f50f3e62caa 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -5483,3 +5483,74 @@ int dwc2_gadget_exit_partial_power_down(struct dwc2_hsotg *hsotg,
 	dev_dbg(hsotg->dev, "Exiting device partial Power Down completed.\n");
 	return ret;
 }
+
+/**
+ * dwc2_gadget_enter_clock_gating() - Put controller in clock gating.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ *
+ * Return: non-zero if failed to enter device partial power down.
+ *
+ * This function is for entering device mode clock gating.
+ */
+void dwc2_gadget_enter_clock_gating(struct dwc2_hsotg *hsotg)
+{
+	u32 pcgctl;
+
+	dev_dbg(hsotg->dev, "Entering device clock gating.\n");
+
+	/* Set the Phy Clock bit as suspend is received. */
+	pcgctl = dwc2_readl(hsotg, PCGCTL);
+	pcgctl |= PCGCTL_STOPPCLK;
+	dwc2_writel(hsotg, pcgctl, PCGCTL);
+	udelay(5);
+
+	/* Set the Gate hclk as suspend is received. */
+	pcgctl = dwc2_readl(hsotg, PCGCTL);
+	pcgctl |= PCGCTL_GATEHCLK;
+	dwc2_writel(hsotg, pcgctl, PCGCTL);
+	udelay(5);
+
+	hsotg->lx_state = DWC2_L2;
+	hsotg->bus_suspended = true;
+}
+
+/*
+ * dwc2_gadget_exit_clock_gating() - Exit controller from device clock gating.
+ *
+ * @hsotg: Programming view of the DWC_otg controller
+ * @rem_wakeup: indicates whether remote wake up is enabled.
+ *
+ * This function is for exiting from device mode clock gating.
+ */
+void dwc2_gadget_exit_clock_gating(struct dwc2_hsotg *hsotg, int rem_wakeup)
+{
+	u32 pcgctl;
+	u32 dctl;
+
+	dev_dbg(hsotg->dev, "Exiting device clock gating.\n");
+
+	/* Clear the Gate hclk. */
+	pcgctl = dwc2_readl(hsotg, PCGCTL);
+	pcgctl &= ~PCGCTL_GATEHCLK;
+	dwc2_writel(hsotg, pcgctl, PCGCTL);
+	udelay(5);
+
+	/* Phy Clock bit. */
+	pcgctl = dwc2_readl(hsotg, PCGCTL);
+	pcgctl &= ~PCGCTL_STOPPCLK;
+	dwc2_writel(hsotg, pcgctl, PCGCTL);
+	udelay(5);
+
+	if (rem_wakeup) {
+		/* Set Remote Wakeup Signaling */
+		dctl = dwc2_readl(hsotg, DCTL);
+		dctl |= DCTL_RMTWKUPSIG;
+		dwc2_writel(hsotg, dctl, DCTL);
+	}
+
+	/* Change to L0 state */
+	call_gadget(hsotg, resume);
+	hsotg->lx_state = DWC2_L0;
+	hsotg->bus_suspended = false;
+}
-- 
2.25.1


  parent reply	other threads:[~2021-04-13  7:36 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1618297800.git.Arthur.Petrosyan@synopsys.com>
2021-04-13  7:16 ` [PATCH 01/12] usb: dwc2: Add device clock gating support functions Artur Petrosyan
2021-04-13  7:16 ` [PATCH 02/12] usb: dwc2: Add host " Artur Petrosyan
2021-04-13  7:16 ` [PATCH 03/12] usb: dwc2: Allow entering clock gating from USB_SUSPEND interrupt Artur Petrosyan
2021-04-13  9:25   ` Sergei Shtylyov
2021-04-13  7:16 ` [PATCH 04/12] usb: dwc2: Add exit clock gating from wakeup interrupt Artur Petrosyan
2021-04-13  7:16 ` [PATCH 05/12] usb: dwc2: Add exit clock gating from session request interrupt Artur Petrosyan
2021-04-13  7:16 ` [PATCH 06/12] usb: dwc2: Add exit clock gating when port reset is asserted Artur Petrosyan
2021-04-13  7:17 ` [PATCH 07/12] usb: dwc2: Update enter clock gating when port is suspended Artur Petrosyan
2021-04-13  9:22   ` Sergei Shtylyov
2021-04-13 10:24     ` Greg Kroah-Hartman
2021-04-13  7:17 ` [PATCH 08/12] usb: dwc2: Update exit clock gating when port is resumed Artur Petrosyan
2021-04-13  7:17 ` [PATCH 09/12] usb: dwc2: Allow exit clock gating in urb enqueue Artur Petrosyan
2021-04-13  7:17 ` [PATCH 10/12] usb: dwc2: Add clock gating entering flow by system suspend Artur Petrosyan
2021-04-13  7:17 ` [PATCH 11/12] usb: dwc2: Add clock gating exiting flow by system resume Artur Petrosyan
2021-04-13  7:17 ` [PATCH 12/12] usb: dwc2: Add exit clock gating before removing driver Artur Petrosyan
2021-04-13  7:36 ` Artur Petrosyan [this message]
2021-04-13  7:36 ` [PATCH v2 02/12] usb: dwc2: Add host clock gating support functions Artur Petrosyan
2021-04-13  7:36 ` [PATCH v2 03/12] usb: dwc2: Allow entering clock gating from USB_SUSPEND interrupt Artur Petrosyan
2021-04-13  7:36 ` [PATCH v2 04/12] usb: dwc2: Add exit clock gating from wakeup interrupt Artur Petrosyan
2021-04-13  7:36 ` [PATCH v2 05/12] usb: dwc2: Add exit clock gating from session request interrupt Artur Petrosyan
2021-04-13  7:36 ` [PATCH v2 06/12] usb: dwc2: Add exit clock gating when port reset is asserted Artur Petrosyan
2021-04-13  7:36 ` [PATCH v2 07/12] usb: dwc2: Update enter clock gating when port is suspended Artur Petrosyan
2021-04-13  7:37 ` [PATCH v2 08/12] usb: dwc2: Update exit clock gating when port is resumed Artur Petrosyan
2021-04-13  7:37 ` [PATCH v2 09/12] usb: dwc2: Allow exit clock gating in urb enqueue Artur Petrosyan
2021-04-13  7:37 ` [PATCH v2 10/12] usb: dwc2: Add clock gating entering flow by system suspend Artur Petrosyan
2021-04-13  9:29   ` Sergei Shtylyov
2021-04-13  7:37 ` [PATCH v2 11/12] usb: dwc2: Add clock gating exiting flow by system resume Artur Petrosyan
2021-04-13  9:30   ` Sergei Shtylyov
2021-04-13  7:37 ` [PATCH v2 12/12] usb: dwc2: Add exit clock gating before removing driver Artur Petrosyan
     [not found] ` <20210413073600.57846A0094@mailhost.synopsys.com>
2021-04-13  8:03   ` [PATCH v2 00/12] usb: dwc2: Add clock gating support Artur Petrosyan
2021-04-13 10:26     ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210413073607.F41E8A0094@mailhost.synopsys.com \
    --to=arthur.petrosyan@synopsys.com \
    --cc=John.Youn@synopsys.com \
    --cc=Minas.Harutyunyan@synopsys.com \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).