[v2,3/3] drm/msm/dp: check main link status before start aux read
diff mbox series

Message ID 1618355504-5401-1-git-send-email-khsieh@codeaurora.org
State New
Headers show
Series
  • [v2,1/3] drm/msm/dp: check sink_count before update is_connected status
Related show

Commit Message

Kuogee Hsieh April 13, 2021, 11:11 p.m. UTC
Make sure main link is in connection state before start aux
read/write operation to avoid unnecessary long delay due to
main link had been unplugged.

Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
---
 drivers/gpu/drm/msm/dp/dp_aux.c  |  5 +++++
 drivers/gpu/drm/msm/dp/dp_link.c | 20 +++++++++++++++-----
 2 files changed, 20 insertions(+), 5 deletions(-)

Comments

Stephen Boyd April 14, 2021, 9:09 p.m. UTC | #1
Quoting Kuogee Hsieh (2021-04-13 16:11:44)
> Make sure main link is in connection state before start aux
> read/write operation to avoid unnecessary long delay due to
> main link had been unplugged.
> 
> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
> ---
>  drivers/gpu/drm/msm/dp/dp_aux.c  |  5 +++++
>  drivers/gpu/drm/msm/dp/dp_link.c | 20 +++++++++++++++-----
>  2 files changed, 20 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
> index 7c22bfe..fae3806 100644
> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
> @@ -343,6 +343,11 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
>  
>         mutex_lock(&aux->mutex);
>  
> +       if (!dp_catalog_link_is_connected(aux->catalog)) {
> +               ret = -ETIMEDOUT;
> +               goto unlock_exit;
> +       }

I get a crash here sometimes when plugging and unplugging an apple HDMI
dongle during suspend/resume. I guess device power management
(dp_pm_suspend()) is happening in parallel with aux transfers from the
kthread. Why doesn't the aux communication start reporting NAKs once the
cable is disconnected?

[  366.210058] hdmi-audio-codec hdmi-audio-codec.15.auto: calling platform_pm_suspend+0x0/0x60 @ 7175, parent: ae90000.displayport-controller
[  366.222825] hdmi-audio-codec hdmi-audio-codec.15.auto: platform_pm_suspend+0x0/0x60 returned 0 after 1 usecs
[  366.232939] msm-dp-display ae90000.displayport-controller: calling dp_pm_suspend+0x0/0x80 @ 7175, parent: ae00000.mdss
[  366.244006] msm-dp-display ae90000.displayport-controller: dp_pm_suspend+0x0/0x80 returned 0 after 79 usecs
[  366.254025] msm_dsi ae94000.dsi: calling pm_runtime_force_suspend+0x0/0xb4 @ 7175, parent: ae00000.mdss
[  366.263669] msm_dsi ae94000.dsi: pm_runtime_force_suspend+0x0/0xb4 returned 0 after 0 usecs
[  366.272290] panel-simple panel: calling platform_pm_suspend+0x0/0x60 @ 7175, parent: platform
[  366.272501] ti_sn65dsi86 2-002d: calling pm_runtime_force_suspend+0x0/0xb4 @ 176, parent: i2c-2
[  366.281055] panel-simple panel: platform_pm_suspend+0x0/0x60 returned 0 after 0 usecs
[  366.281081] leds mmc1::: calling led_suspend+0x0/0x4c @ 7175, parent: 7c4000.sdhci
[  366.290065] ti_sn65dsi86 2-002d: pm_runtime_force_suspend+0x0/0xb4 returned 0 after 0 usecs
[  366.298046] leds mmc1::: led_suspend+0x0/0x4c returned 0 after 1 usecs
[  366.302994] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP
[  366.303006] Modules linked in: vhost_vsock vmw_vsock_virtio_transport_common vsock vhost rfcomm algif_hash algif_skcipher af_alg xt_cgroup uinput xt_MASQUERADE venus_enc hci_uart venus_dec btqca cros_ec_typec typec bluetooth qcom_spmi_adc5 snd_soc_sc7180 qcom_spmi_temp_alarm ecdh_generic qcom_spmi_adc_tm5 qcom_vadc_common snd_soc_qcom_common ecc snd_soc_rt5682_i2c snd_soc_rt5682 snd_soc_rl6231 venus_core v4l2_mem2mem snd_soc_lpass_sc7180 snd_soc_lpass_hdmi snd_soc_lpass_cpu snd_soc_lpass_platform snd_soc_max98357a fuse iio_trig_sysfs cros_ec_sensors cros_ec_sensors_ring cros_ec_lid_angle cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf cros_ec_sensorhub lzo_rle lzo_compress zram ath10k_snoc ath10k_core ath mac80211 cfg80211 cdc_ether usbnet r8152 mii uvcvideo videobuf2_vmalloc joydev
[  366.303211] CPU: 0 PID: 224 Comm: dp_hpd_handler Not tainted 5.4.109 #27
[  366.303216] Hardware name: Google Lazor (rev3+) with KB Backlight (DT)
[  366.303225] pstate: 60c00009 (nZCv daif +PAN +UAO)
[  366.303234] pc : dp_catalog_link_is_connected+0x20/0x34
[  366.303244] lr : dp_aux_transfer+0x44/0x284
[  366.303250] sp : ffffffc011bfbbe0
[  366.303254] x29: ffffffc011bfbbe0 x28: aaaaaaaaaaaaaaaa 
[  366.303262] x27: 000000000000000c x26: ffffff896f8212bc 
[  366.303269] x25: 0000000000000001 x24: 0000000000000001 
[  366.303275] x23: 0000000000000020 x22: ffffff896ff82118 
[  366.303282] x21: ffffffc011bfbc50 x20: ffffff896ff82090 
[  366.303289] x19: ffffff896ffc3598 x18: 0000000000000000 
[  366.303295] x17: 0000000000000000 x16: 0000000000000001 
[  366.303303] x15: 0000000000000000 x14: 00000000000002ef 
[  366.303311] x13: 0000000000000400 x12: ffffffeb896ea060 
[  366.303317] x11: 0000000000000000 x10: 0000000000000000 
[  366.303324] x9 : ffffff896f061100 x8 : ffffffc010582204 
[  366.303331] x7 : 000000b2b5593519 x6 : 00000000003033ff 
[  366.303338] x5 : 0000000000000000 x4 : 0000000000000001 
[  366.303345] x3 : ffffff896ff432a1 x2 : 0000000000000000 
[  366.303352] x1 : 0000000000000119 x0 : ffffff896ffc3598 
[  366.303360] Call trace:
[  366.303367]  dp_catalog_link_is_connected+0x20/0x34
[  366.303374]  dp_aux_transfer+0x44/0x284
[  366.303387]  drm_dp_dpcd_access+0x8c/0x11c
[  366.303393]  drm_dp_dpcd_read+0x64/0x10c
[  366.303399]  dp_link_process_request+0x94/0xaf8
[  366.303405]  dp_display_usbpd_attention_cb+0x38/0x140
[  366.303411]  hpd_event_thread+0x3f0/0x48c
[  366.303426]  kthread+0x140/0x17c
[  366.303439]  ret_from_fork+0x10/0x18
[  366.303458] Code: d503201f f85f0268 f9400508 91081108 (b9400108) 

> +
>         aux->native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
>  
>         /* Ignore address only message */
> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
> index be986da..d35b18e 100644
> --- a/drivers/gpu/drm/msm/dp/dp_link.c
> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
> @@ -737,18 +737,25 @@ static int dp_link_parse_sink_count(struct dp_link *dp_link)
>         return 0;
>  }
>  
> -static void dp_link_parse_sink_status_field(struct dp_link_private *link)
> +static int dp_link_parse_sink_status_field(struct dp_link_private *link)
>  {
>         int len = 0;
>  
>         link->prev_sink_count = link->dp_link.sink_count;
> -       dp_link_parse_sink_count(&link->dp_link);
> +       len = dp_link_parse_sink_count(&link->dp_link);
> +       if (len < 0) {
> +               DRM_ERROR("DP lparse sink count failed\n");

Is it 'lparse' on purpose?

> +               return len;
> +       }
>  
>         len = drm_dp_dpcd_read_link_status(link->aux,
>                 link->link_status);
> -       if (len < DP_LINK_STATUS_SIZE)
> +       if (len < DP_LINK_STATUS_SIZE) {
>                 DRM_ERROR("DP link status read failed\n");
> -       dp_link_parse_request(link);
> +               return len;
> +       }
> +
> +       return dp_link_parse_request(link);
>  }
>  
>  /**
> @@ -1032,7 +1039,10 @@ int dp_link_process_request(struct dp_link *dp_link)
>  
>         dp_link_reset_data(link);
>  
> -       dp_link_parse_sink_status_field(link);
> +       ret = dp_link_parse_sink_status_field(link);
> +       if (ret) {
> +               return ret;
> +       }
>  
>         if (link->request.test_requested == DP_TEST_LINK_EDID_READ) {
>                 dp_link->sink_request |= DP_TEST_LINK_EDID_READ;

These are probably good fixes on their own given that
dp_link_parse_sink_count() can return an error and that was being
ignored.
Kuogee Hsieh April 15, 2021, 5:37 p.m. UTC | #2
On 2021-04-14 14:09, Stephen Boyd wrote:
> Quoting Kuogee Hsieh (2021-04-13 16:11:44)
>> Make sure main link is in connection state before start aux
>> read/write operation to avoid unnecessary long delay due to
>> main link had been unplugged.
>> 
>> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
>> ---
>>  drivers/gpu/drm/msm/dp/dp_aux.c  |  5 +++++
>>  drivers/gpu/drm/msm/dp/dp_link.c | 20 +++++++++++++++-----
>>  2 files changed, 20 insertions(+), 5 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c 
>> b/drivers/gpu/drm/msm/dp/dp_aux.c
>> index 7c22bfe..fae3806 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
>> @@ -343,6 +343,11 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux 
>> *dp_aux,
>> 
>>         mutex_lock(&aux->mutex);
>> 
>> +       if (!dp_catalog_link_is_connected(aux->catalog)) {
>> +               ret = -ETIMEDOUT;
>> +               goto unlock_exit;
>> +       }
> 
> I get a crash here sometimes when plugging and unplugging an apple HDMI
> dongle during suspend/resume. I guess device power management
> (dp_pm_suspend()) is happening in parallel with aux transfers from the
> kthread. Why doesn't the aux communication start reporting NAKs once 
> the
> cable is disconnected?
> 
> [  366.210058] hdmi-audio-codec hdmi-audio-codec.15.auto: calling
> platform_pm_suspend+0x0/0x60 @ 7175, parent:
> ae90000.displayport-controller
> [  366.222825] hdmi-audio-codec hdmi-audio-codec.15.auto:
> platform_pm_suspend+0x0/0x60 returned 0 after 1 usecs
> [  366.232939] msm-dp-display ae90000.displayport-controller: calling
> dp_pm_suspend+0x0/0x80 @ 7175, parent: ae00000.mdss
> [  366.244006] msm-dp-display ae90000.displayport-controller:
> dp_pm_suspend+0x0/0x80 returned 0 after 79 usecs
> [  366.254025] msm_dsi ae94000.dsi: calling
> pm_runtime_force_suspend+0x0/0xb4 @ 7175, parent: ae00000.mdss
> [  366.263669] msm_dsi ae94000.dsi: pm_runtime_force_suspend+0x0/0xb4
> returned 0 after 0 usecs
> [  366.272290] panel-simple panel: calling
> platform_pm_suspend+0x0/0x60 @ 7175, parent: platform
> [  366.272501] ti_sn65dsi86 2-002d: calling
> pm_runtime_force_suspend+0x0/0xb4 @ 176, parent: i2c-2
> [  366.281055] panel-simple panel: platform_pm_suspend+0x0/0x60
> returned 0 after 0 usecs
> [  366.281081] leds mmc1::: calling led_suspend+0x0/0x4c @ 7175,
> parent: 7c4000.sdhci
> [  366.290065] ti_sn65dsi86 2-002d: pm_runtime_force_suspend+0x0/0xb4
> returned 0 after 0 usecs
> [  366.298046] leds mmc1::: led_suspend+0x0/0x4c returned 0 after 1 
> usecs
> [  366.302994] Internal error: synchronous external abort: 96000010
> [#1] PREEMPT SMP
> [  366.303006] Modules linked in: vhost_vsock
> vmw_vsock_virtio_transport_common vsock vhost rfcomm algif_hash
> algif_skcipher af_alg xt_cgroup uinput xt_MASQUERADE venus_enc
> hci_uart venus_dec btqca cros_ec_typec typec bluetooth qcom_spmi_adc5
> snd_soc_sc7180 qcom_spmi_temp_alarm ecdh_generic qcom_spmi_adc_tm5
> qcom_vadc_common snd_soc_qcom_common ecc snd_soc_rt5682_i2c
> snd_soc_rt5682 snd_soc_rl6231 venus_core v4l2_mem2mem
> snd_soc_lpass_sc7180 snd_soc_lpass_hdmi snd_soc_lpass_cpu
> snd_soc_lpass_platform snd_soc_max98357a fuse iio_trig_sysfs
> cros_ec_sensors cros_ec_sensors_ring cros_ec_lid_angle
> cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf
> cros_ec_sensorhub lzo_rle lzo_compress zram ath10k_snoc ath10k_core
> ath mac80211 cfg80211 cdc_ether usbnet r8152 mii uvcvideo
> videobuf2_vmalloc joydev
> [  366.303211] CPU: 0 PID: 224 Comm: dp_hpd_handler Not tainted 5.4.109 
> #27
> [  366.303216] Hardware name: Google Lazor (rev3+) with KB Backlight 
> (DT)
> [  366.303225] pstate: 60c00009 (nZCv daif +PAN +UAO)
> [  366.303234] pc : dp_catalog_link_is_connected+0x20/0x34
> [  366.303244] lr : dp_aux_transfer+0x44/0x284
> [  366.303250] sp : ffffffc011bfbbe0
> [  366.303254] x29: ffffffc011bfbbe0 x28: aaaaaaaaaaaaaaaa
> [  366.303262] x27: 000000000000000c x26: ffffff896f8212bc
> [  366.303269] x25: 0000000000000001 x24: 0000000000000001
> [  366.303275] x23: 0000000000000020 x22: ffffff896ff82118
> [  366.303282] x21: ffffffc011bfbc50 x20: ffffff896ff82090
> [  366.303289] x19: ffffff896ffc3598 x18: 0000000000000000
> [  366.303295] x17: 0000000000000000 x16: 0000000000000001
> [  366.303303] x15: 0000000000000000 x14: 00000000000002ef
> [  366.303311] x13: 0000000000000400 x12: ffffffeb896ea060
> [  366.303317] x11: 0000000000000000 x10: 0000000000000000
> [  366.303324] x9 : ffffff896f061100 x8 : ffffffc010582204
> [  366.303331] x7 : 000000b2b5593519 x6 : 00000000003033ff
> [  366.303338] x5 : 0000000000000000 x4 : 0000000000000001
> [  366.303345] x3 : ffffff896ff432a1 x2 : 0000000000000000
> [  366.303352] x1 : 0000000000000119 x0 : ffffff896ffc3598
> [  366.303360] Call trace:
> [  366.303367]  dp_catalog_link_is_connected+0x20/0x34
> [  366.303374]  dp_aux_transfer+0x44/0x284
> [  366.303387]  drm_dp_dpcd_access+0x8c/0x11c
> [  366.303393]  drm_dp_dpcd_read+0x64/0x10c
> [  366.303399]  dp_link_process_request+0x94/0xaf8
> [  366.303405]  dp_display_usbpd_attention_cb+0x38/0x140
> [  366.303411]  hpd_event_thread+0x3f0/0x48c
> [  366.303426]  kthread+0x140/0x17c
> [  366.303439]  ret_from_fork+0x10/0x18
> [  366.303458] Code: d503201f f85f0268 f9400508 91081108 (b9400108)
> 
it needs to make sure core clock enabled before access dp ctrl registers
I am look into it
>> +
>>         aux->native = msg->request & (DP_AUX_NATIVE_WRITE & 
>> DP_AUX_NATIVE_READ);
>> 
>>         /* Ignore address only message */
>> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c 
>> b/drivers/gpu/drm/msm/dp/dp_link.c
>> index be986da..d35b18e 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_link.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
>> @@ -737,18 +737,25 @@ static int dp_link_parse_sink_count(struct 
>> dp_link *dp_link)
>>         return 0;
>>  }
>> 
>> -static void dp_link_parse_sink_status_field(struct dp_link_private 
>> *link)
>> +static int dp_link_parse_sink_status_field(struct dp_link_private 
>> *link)
>>  {
>>         int len = 0;
>> 
>>         link->prev_sink_count = link->dp_link.sink_count;
>> -       dp_link_parse_sink_count(&link->dp_link);
>> +       len = dp_link_parse_sink_count(&link->dp_link);
>> +       if (len < 0) {
>> +               DRM_ERROR("DP lparse sink count failed\n");
> 
> Is it 'lparse' on purpose?
> 
>> +               return len;
>> +       }
>> 
>>         len = drm_dp_dpcd_read_link_status(link->aux,
>>                 link->link_status);
>> -       if (len < DP_LINK_STATUS_SIZE)
>> +       if (len < DP_LINK_STATUS_SIZE) {
>>                 DRM_ERROR("DP link status read failed\n");
>> -       dp_link_parse_request(link);
>> +               return len;
>> +       }
>> +
>> +       return dp_link_parse_request(link);
>>  }
>> 
>>  /**
>> @@ -1032,7 +1039,10 @@ int dp_link_process_request(struct dp_link 
>> *dp_link)
>> 
>>         dp_link_reset_data(link);
>> 
>> -       dp_link_parse_sink_status_field(link);
>> +       ret = dp_link_parse_sink_status_field(link);
>> +       if (ret) {
>> +               return ret;
>> +       }
>> 
>>         if (link->request.test_requested == DP_TEST_LINK_EDID_READ) {
>>                 dp_link->sink_request |= DP_TEST_LINK_EDID_READ;
> 
> These are probably good fixes on their own given that
> dp_link_parse_sink_count() can return an error and that was being
> ignored.
Stephen Boyd April 15, 2021, 8:06 p.m. UTC | #3
Quoting khsieh@codeaurora.org (2021-04-15 10:37:29)
> On 2021-04-14 14:09, Stephen Boyd wrote:
> > Quoting Kuogee Hsieh (2021-04-13 16:11:44)
> >> Make sure main link is in connection state before start aux
> >> read/write operation to avoid unnecessary long delay due to
> >> main link had been unplugged.
> >> 
> >> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
> >> ---
> >>  drivers/gpu/drm/msm/dp/dp_aux.c  |  5 +++++
> >>  drivers/gpu/drm/msm/dp/dp_link.c | 20 +++++++++++++++-----
> >>  2 files changed, 20 insertions(+), 5 deletions(-)
> >> 
> >> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c 
> >> b/drivers/gpu/drm/msm/dp/dp_aux.c
> >> index 7c22bfe..fae3806 100644
> >> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
> >> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
> >> @@ -343,6 +343,11 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux 
> >> *dp_aux,
> >> 
> >>         mutex_lock(&aux->mutex);
> >> 
> >> +       if (!dp_catalog_link_is_connected(aux->catalog)) {
> >> +               ret = -ETIMEDOUT;
> >> +               goto unlock_exit;
> >> +       }
> > 
> > I get a crash here sometimes when plugging and unplugging an apple HDMI
> > dongle during suspend/resume. I guess device power management
> > (dp_pm_suspend()) is happening in parallel with aux transfers from the
> > kthread. Why doesn't the aux communication start reporting NAKs once 
> > the
> > cable is disconnected?
> > 
> > [  366.210058] hdmi-audio-codec hdmi-audio-codec.15.auto: calling
> > platform_pm_suspend+0x0/0x60 @ 7175, parent:
> > ae90000.displayport-controller
> > [  366.222825] hdmi-audio-codec hdmi-audio-codec.15.auto:
> > platform_pm_suspend+0x0/0x60 returned 0 after 1 usecs
> > [  366.232939] msm-dp-display ae90000.displayport-controller: calling
> > dp_pm_suspend+0x0/0x80 @ 7175, parent: ae00000.mdss
> > [  366.244006] msm-dp-display ae90000.displayport-controller:
> > dp_pm_suspend+0x0/0x80 returned 0 after 79 usecs
> > [  366.254025] msm_dsi ae94000.dsi: calling
> > pm_runtime_force_suspend+0x0/0xb4 @ 7175, parent: ae00000.mdss
> > [  366.263669] msm_dsi ae94000.dsi: pm_runtime_force_suspend+0x0/0xb4
> > returned 0 after 0 usecs
> > [  366.272290] panel-simple panel: calling
> > platform_pm_suspend+0x0/0x60 @ 7175, parent: platform
> > [  366.272501] ti_sn65dsi86 2-002d: calling
> > pm_runtime_force_suspend+0x0/0xb4 @ 176, parent: i2c-2
> > [  366.281055] panel-simple panel: platform_pm_suspend+0x0/0x60
> > returned 0 after 0 usecs
> > [  366.281081] leds mmc1::: calling led_suspend+0x0/0x4c @ 7175,
> > parent: 7c4000.sdhci
> > [  366.290065] ti_sn65dsi86 2-002d: pm_runtime_force_suspend+0x0/0xb4
> > returned 0 after 0 usecs
> > [  366.298046] leds mmc1::: led_suspend+0x0/0x4c returned 0 after 1 
> > usecs
> > [  366.302994] Internal error: synchronous external abort: 96000010
> > [#1] PREEMPT SMP
> > [  366.303006] Modules linked in: vhost_vsock
> > vmw_vsock_virtio_transport_common vsock vhost rfcomm algif_hash
> > algif_skcipher af_alg xt_cgroup uinput xt_MASQUERADE venus_enc
> > hci_uart venus_dec btqca cros_ec_typec typec bluetooth qcom_spmi_adc5
> > snd_soc_sc7180 qcom_spmi_temp_alarm ecdh_generic qcom_spmi_adc_tm5
> > qcom_vadc_common snd_soc_qcom_common ecc snd_soc_rt5682_i2c
> > snd_soc_rt5682 snd_soc_rl6231 venus_core v4l2_mem2mem
> > snd_soc_lpass_sc7180 snd_soc_lpass_hdmi snd_soc_lpass_cpu
> > snd_soc_lpass_platform snd_soc_max98357a fuse iio_trig_sysfs
> > cros_ec_sensors cros_ec_sensors_ring cros_ec_lid_angle
> > cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf
> > cros_ec_sensorhub lzo_rle lzo_compress zram ath10k_snoc ath10k_core
> > ath mac80211 cfg80211 cdc_ether usbnet r8152 mii uvcvideo
> > videobuf2_vmalloc joydev
> > [  366.303211] CPU: 0 PID: 224 Comm: dp_hpd_handler Not tainted 5.4.109 
> > #27
> > [  366.303216] Hardware name: Google Lazor (rev3+) with KB Backlight 
> > (DT)
> > [  366.303225] pstate: 60c00009 (nZCv daif +PAN +UAO)
> > [  366.303234] pc : dp_catalog_link_is_connected+0x20/0x34
> > [  366.303244] lr : dp_aux_transfer+0x44/0x284
> > [  366.303250] sp : ffffffc011bfbbe0
> > [  366.303254] x29: ffffffc011bfbbe0 x28: aaaaaaaaaaaaaaaa
> > [  366.303262] x27: 000000000000000c x26: ffffff896f8212bc
> > [  366.303269] x25: 0000000000000001 x24: 0000000000000001
> > [  366.303275] x23: 0000000000000020 x22: ffffff896ff82118
> > [  366.303282] x21: ffffffc011bfbc50 x20: ffffff896ff82090
> > [  366.303289] x19: ffffff896ffc3598 x18: 0000000000000000
> > [  366.303295] x17: 0000000000000000 x16: 0000000000000001
> > [  366.303303] x15: 0000000000000000 x14: 00000000000002ef
> > [  366.303311] x13: 0000000000000400 x12: ffffffeb896ea060
> > [  366.303317] x11: 0000000000000000 x10: 0000000000000000
> > [  366.303324] x9 : ffffff896f061100 x8 : ffffffc010582204
> > [  366.303331] x7 : 000000b2b5593519 x6 : 00000000003033ff
> > [  366.303338] x5 : 0000000000000000 x4 : 0000000000000001
> > [  366.303345] x3 : ffffff896ff432a1 x2 : 0000000000000000
> > [  366.303352] x1 : 0000000000000119 x0 : ffffff896ffc3598
> > [  366.303360] Call trace:
> > [  366.303367]  dp_catalog_link_is_connected+0x20/0x34
> > [  366.303374]  dp_aux_transfer+0x44/0x284
> > [  366.303387]  drm_dp_dpcd_access+0x8c/0x11c
> > [  366.303393]  drm_dp_dpcd_read+0x64/0x10c
> > [  366.303399]  dp_link_process_request+0x94/0xaf8
> > [  366.303405]  dp_display_usbpd_attention_cb+0x38/0x140
> > [  366.303411]  hpd_event_thread+0x3f0/0x48c
> > [  366.303426]  kthread+0x140/0x17c
> > [  366.303439]  ret_from_fork+0x10/0x18
> > [  366.303458] Code: d503201f f85f0268 f9400508 91081108 (b9400108)
> > 
> it needs to make sure core clock enabled before access dp ctrl registers
> I am look into it

Is it really necessary to have this patch at all? I think there are
bigger problems with suspend/resume of the DP driver in relation to the
kthread stopping. I hope that the aux channel would start NAKing
transfers once the cable is disconnected too, so that we don't need to
do an extra check for each aux transfer.
Kuogee Hsieh April 15, 2021, 10:02 p.m. UTC | #4
On 2021-04-15 13:06, Stephen Boyd wrote:
> Quoting khsieh@codeaurora.org (2021-04-15 10:37:29)
>> On 2021-04-14 14:09, Stephen Boyd wrote:
>> > Quoting Kuogee Hsieh (2021-04-13 16:11:44)
>> >> Make sure main link is in connection state before start aux
>> >> read/write operation to avoid unnecessary long delay due to
>> >> main link had been unplugged.
>> >>
>> >> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
>> >> ---
>> >>  drivers/gpu/drm/msm/dp/dp_aux.c  |  5 +++++
>> >>  drivers/gpu/drm/msm/dp/dp_link.c | 20 +++++++++++++++-----
>> >>  2 files changed, 20 insertions(+), 5 deletions(-)
>> >>
>> >> diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c
>> >> b/drivers/gpu/drm/msm/dp/dp_aux.c
>> >> index 7c22bfe..fae3806 100644
>> >> --- a/drivers/gpu/drm/msm/dp/dp_aux.c
>> >> +++ b/drivers/gpu/drm/msm/dp/dp_aux.c
>> >> @@ -343,6 +343,11 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux
>> >> *dp_aux,
>> >>
>> >>         mutex_lock(&aux->mutex);
>> >>
>> >> +       if (!dp_catalog_link_is_connected(aux->catalog)) {
>> >> +               ret = -ETIMEDOUT;
>> >> +               goto unlock_exit;
>> >> +       }
>> >
>> > I get a crash here sometimes when plugging and unplugging an apple HDMI
>> > dongle during suspend/resume. I guess device power management
>> > (dp_pm_suspend()) is happening in parallel with aux transfers from the
>> > kthread. Why doesn't the aux communication start reporting NAKs once
>> > the
>> > cable is disconnected?
>> >
>> > [  366.210058] hdmi-audio-codec hdmi-audio-codec.15.auto: calling
>> > platform_pm_suspend+0x0/0x60 @ 7175, parent:
>> > ae90000.displayport-controller
>> > [  366.222825] hdmi-audio-codec hdmi-audio-codec.15.auto:
>> > platform_pm_suspend+0x0/0x60 returned 0 after 1 usecs
>> > [  366.232939] msm-dp-display ae90000.displayport-controller: calling
>> > dp_pm_suspend+0x0/0x80 @ 7175, parent: ae00000.mdss
>> > [  366.244006] msm-dp-display ae90000.displayport-controller:
>> > dp_pm_suspend+0x0/0x80 returned 0 after 79 usecs
>> > [  366.254025] msm_dsi ae94000.dsi: calling
>> > pm_runtime_force_suspend+0x0/0xb4 @ 7175, parent: ae00000.mdss
>> > [  366.263669] msm_dsi ae94000.dsi: pm_runtime_force_suspend+0x0/0xb4
>> > returned 0 after 0 usecs
>> > [  366.272290] panel-simple panel: calling
>> > platform_pm_suspend+0x0/0x60 @ 7175, parent: platform
>> > [  366.272501] ti_sn65dsi86 2-002d: calling
>> > pm_runtime_force_suspend+0x0/0xb4 @ 176, parent: i2c-2
>> > [  366.281055] panel-simple panel: platform_pm_suspend+0x0/0x60
>> > returned 0 after 0 usecs
>> > [  366.281081] leds mmc1::: calling led_suspend+0x0/0x4c @ 7175,
>> > parent: 7c4000.sdhci
>> > [  366.290065] ti_sn65dsi86 2-002d: pm_runtime_force_suspend+0x0/0xb4
>> > returned 0 after 0 usecs
>> > [  366.298046] leds mmc1::: led_suspend+0x0/0x4c returned 0 after 1
>> > usecs
>> > [  366.302994] Internal error: synchronous external abort: 96000010
>> > [#1] PREEMPT SMP
>> > [  366.303006] Modules linked in: vhost_vsock
>> > vmw_vsock_virtio_transport_common vsock vhost rfcomm algif_hash
>> > algif_skcipher af_alg xt_cgroup uinput xt_MASQUERADE venus_enc
>> > hci_uart venus_dec btqca cros_ec_typec typec bluetooth qcom_spmi_adc5
>> > snd_soc_sc7180 qcom_spmi_temp_alarm ecdh_generic qcom_spmi_adc_tm5
>> > qcom_vadc_common snd_soc_qcom_common ecc snd_soc_rt5682_i2c
>> > snd_soc_rt5682 snd_soc_rl6231 venus_core v4l2_mem2mem
>> > snd_soc_lpass_sc7180 snd_soc_lpass_hdmi snd_soc_lpass_cpu
>> > snd_soc_lpass_platform snd_soc_max98357a fuse iio_trig_sysfs
>> > cros_ec_sensors cros_ec_sensors_ring cros_ec_lid_angle
>> > cros_ec_sensors_core industrialio_triggered_buffer kfifo_buf
>> > cros_ec_sensorhub lzo_rle lzo_compress zram ath10k_snoc ath10k_core
>> > ath mac80211 cfg80211 cdc_ether usbnet r8152 mii uvcvideo
>> > videobuf2_vmalloc joydev
>> > [  366.303211] CPU: 0 PID: 224 Comm: dp_hpd_handler Not tainted 5.4.109
>> > #27
>> > [  366.303216] Hardware name: Google Lazor (rev3+) with KB Backlight
>> > (DT)
>> > [  366.303225] pstate: 60c00009 (nZCv daif +PAN +UAO)
>> > [  366.303234] pc : dp_catalog_link_is_connected+0x20/0x34
>> > [  366.303244] lr : dp_aux_transfer+0x44/0x284
>> > [  366.303250] sp : ffffffc011bfbbe0
>> > [  366.303254] x29: ffffffc011bfbbe0 x28: aaaaaaaaaaaaaaaa
>> > [  366.303262] x27: 000000000000000c x26: ffffff896f8212bc
>> > [  366.303269] x25: 0000000000000001 x24: 0000000000000001
>> > [  366.303275] x23: 0000000000000020 x22: ffffff896ff82118
>> > [  366.303282] x21: ffffffc011bfbc50 x20: ffffff896ff82090
>> > [  366.303289] x19: ffffff896ffc3598 x18: 0000000000000000
>> > [  366.303295] x17: 0000000000000000 x16: 0000000000000001
>> > [  366.303303] x15: 0000000000000000 x14: 00000000000002ef
>> > [  366.303311] x13: 0000000000000400 x12: ffffffeb896ea060
>> > [  366.303317] x11: 0000000000000000 x10: 0000000000000000
>> > [  366.303324] x9 : ffffff896f061100 x8 : ffffffc010582204
>> > [  366.303331] x7 : 000000b2b5593519 x6 : 00000000003033ff
>> > [  366.303338] x5 : 0000000000000000 x4 : 0000000000000001
>> > [  366.303345] x3 : ffffff896ff432a1 x2 : 0000000000000000
>> > [  366.303352] x1 : 0000000000000119 x0 : ffffff896ffc3598
>> > [  366.303360] Call trace:
>> > [  366.303367]  dp_catalog_link_is_connected+0x20/0x34
>> > [  366.303374]  dp_aux_transfer+0x44/0x284mutex.
>> > [  366.303387]  drm_dp_dpcd_access+0x8c/0x11c
>> > [  366.303393]  drm_dp_dpcd_read+0x64/0x10c
>> > [  366.303399]  dp_link_process_request+0x94/0xaf8
>> > [  366.303405]  dp_display_usbpd_attention_cb+0x38/0x140
>> > [  366.303411]  hpd_event_thread+0x3f0/0x48c
>> > [  366.303426]  kthread+0x140/0x17c
>> > [  366.303439]  ret_from_fork+0x10/0x18
>> > [  366.303458] Code: d503201f f85f0268 f9400508 91081108 (b9400108)
>> >
>> it needs to make sure core clock enabled before access dp ctrl 
>> registers
>> I am look into it
> 
> Is it really necessary to have this patch at all? I think there are
> bigger problems with suspend/resume of the DP driver in relation to the
> kthread stopping. I hope that the aux channel would start NAKing
> transfers once the cable is disconnected too, so that we don't need to
> do an extra check for each aux transfer.

I am working on duplicate this problem, but it is not happen on me yet 
so far.
 From kernel dump, i can see it crash at dp_irq_hdp_handle() after 
suspended.
dp_irq_hpd_handle and dp_pm_suspend() are serialized by event_mutex.

After suspend, ahb clock is disabled.
Hence next dp_catalog_link_is_connected() crash at acess dp ctrl 
registers.


aux channel does not do NAKing immediately if unplugged. Therefore 
aux_transfer will wait until timeout (HZ/4).
worst, drm_dp_dpcd_access() will retry 32 times before return dpcd 
read/write failed.
This patch try to eliminate the time spinning on waiting for timeout 32 
times.

This patch does not necessary need.
I can drop it.
Stephen Boyd April 15, 2021, 10:46 p.m. UTC | #5
Quoting khsieh@codeaurora.org (2021-04-15 15:02:40)
> On 2021-04-15 13:06, Stephen Boyd wrote:
> > 
> > Is it really necessary to have this patch at all? I think there are
> > bigger problems with suspend/resume of the DP driver in relation to the
> > kthread stopping. I hope that the aux channel would start NAKing
> > transfers once the cable is disconnected too, so that we don't need to
> > do an extra check for each aux transfer.
> 
> I am working on duplicate this problem, but it is not happen on me yet 
> so far.
>  From kernel dump, i can see it crash at dp_irq_hdp_handle() after 
> suspended.
> dp_irq_hpd_handle and dp_pm_suspend() are serialized by event_mutex.
> 
> After suspend, ahb clock is disabled.
> Hence next dp_catalog_link_is_connected() crash at acess dp ctrl 
> registers.
> 
> 
> aux channel does not do NAKing immediately if unplugged. Therefore 
> aux_transfer will wait until timeout (HZ/4).
> worst, drm_dp_dpcd_access() will retry 32 times before return dpcd 
> read/write failed.
> This patch try to eliminate the time spinning on waiting for timeout 32 
> times.
> 

Would be useful to have that level of detail in the commit text.

Maybe when the cable is disconnected the DP phy should be shutdown and
some bit in the phy could effectively "cut off" the aux channel and then
NAKs would start coming through here in the DP controller I/O register
space?

Patch
diff mbox series

diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c
index 7c22bfe..fae3806 100644
--- a/drivers/gpu/drm/msm/dp/dp_aux.c
+++ b/drivers/gpu/drm/msm/dp/dp_aux.c
@@ -343,6 +343,11 @@  static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux,
 
 	mutex_lock(&aux->mutex);
 
+	if (!dp_catalog_link_is_connected(aux->catalog)) {
+		ret = -ETIMEDOUT;
+		goto unlock_exit;
+	}
+
 	aux->native = msg->request & (DP_AUX_NATIVE_WRITE & DP_AUX_NATIVE_READ);
 
 	/* Ignore address only message */
diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
index be986da..d35b18e 100644
--- a/drivers/gpu/drm/msm/dp/dp_link.c
+++ b/drivers/gpu/drm/msm/dp/dp_link.c
@@ -737,18 +737,25 @@  static int dp_link_parse_sink_count(struct dp_link *dp_link)
 	return 0;
 }
 
-static void dp_link_parse_sink_status_field(struct dp_link_private *link)
+static int dp_link_parse_sink_status_field(struct dp_link_private *link)
 {
 	int len = 0;
 
 	link->prev_sink_count = link->dp_link.sink_count;
-	dp_link_parse_sink_count(&link->dp_link);
+	len = dp_link_parse_sink_count(&link->dp_link);
+	if (len < 0) {
+		DRM_ERROR("DP lparse sink count failed\n");
+		return len;
+	}
 
 	len = drm_dp_dpcd_read_link_status(link->aux,
 		link->link_status);
-	if (len < DP_LINK_STATUS_SIZE)
+	if (len < DP_LINK_STATUS_SIZE) {
 		DRM_ERROR("DP link status read failed\n");
-	dp_link_parse_request(link);
+		return len;
+	}
+
+	return dp_link_parse_request(link);
 }
 
 /**
@@ -1032,7 +1039,10 @@  int dp_link_process_request(struct dp_link *dp_link)
 
 	dp_link_reset_data(link);
 
-	dp_link_parse_sink_status_field(link);
+	ret = dp_link_parse_sink_status_field(link);
+	if (ret) {
+		return ret;
+	}
 
 	if (link->request.test_requested == DP_TEST_LINK_EDID_READ) {
 		dp_link->sink_request |= DP_TEST_LINK_EDID_READ;