From: Mitali Borkar <mitaliborkar810@gmail.com>
To: gregkh@linuxfoundation.org, davem@davemloft.net, kuba@kernel.org
Cc: linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
outreachy-kernel@googlegroups.com, mitali_s@me.iitr.ac.in
Subject: [PATCH v2 1/5] staging: rtl8192e: add spaces around binary operators
Date: Wed, 14 Apr 2021 12:25:03 +0530 [thread overview]
Message-ID: <28cbc4825fdfacf5d5ea8bb688a8bd6a1c65f059.1618380932.git.mitaliborkar810@gmail.com> (raw)
In-Reply-To: <cover.1618380932.git.mitaliborkar810@gmail.com>
Added spaces around binary operators like '+', '*', '|', '-', '&',
to improve readability and to meet linux kernel coding style.
Signed-off-by: Mitali Borkar <mitaliborkar810@gmail.com>
---
Changes from v1:- No changes.
drivers/staging/rtl8192e/rtl819x_HTProc.c | 8 ++++----
drivers/staging/rtl8192e/rtl819x_TSProc.c | 8 ++++----
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtl819x_HTProc.c b/drivers/staging/rtl8192e/rtl819x_HTProc.c
index 4a2968566b93..b74c6ac817d4 100644
--- a/drivers/staging/rtl8192e/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192e/rtl819x_HTProc.c
@@ -138,7 +138,7 @@ u16 TxCountToDataRate(struct rtllib_device *ieee, u8 nDataRate)
is40MHz = 1;
isShortGI = 1;
}
- return MCS_DATA_RATE[is40MHz][isShortGI][nDataRate&0xf];
+ return MCS_DATA_RATE[is40MHz][isShortGI][nDataRate & 0xf];
}
bool IsHTHalfNmodeAPs(struct rtllib_device *ieee)
@@ -479,8 +479,8 @@ u8 HTGetHighestMCSRate(struct rtllib_device *ieee, u8 *pMCSRateSet,
if (availableMcsRate[i] != 0) {
bitMap = availableMcsRate[i];
for (j = 0; j < 8; j++) {
- if ((bitMap%2) != 0) {
- if (HTMcsToDataRate(ieee, (8*i+j)) >
+ if ((bitMap % 2) != 0) {
+ if (HTMcsToDataRate(ieee, (8 * i + j)) >
HTMcsToDataRate(ieee, mcsRate))
mcsRate = 8 * i + j;
}
@@ -577,7 +577,7 @@ void HTOnAssocRsp(struct rtllib_device *ieee)
pHTInfo->bCurrentAMPDUEnable = pHTInfo->bAMPDUEnable;
if (ieee->rtllib_ap_sec_type &&
- (ieee->rtllib_ap_sec_type(ieee)&(SEC_ALG_WEP|SEC_ALG_TKIP))) {
+ (ieee->rtllib_ap_sec_type(ieee) & (SEC_ALG_WEP | SEC_ALG_TKIP))) {
if ((pHTInfo->IOTPeer == HT_IOT_PEER_ATHEROS) ||
(pHTInfo->IOTPeer == HT_IOT_PEER_UNKNOWN))
pHTInfo->bCurrentAMPDUEnable = false;
diff --git a/drivers/staging/rtl8192e/rtl819x_TSProc.c b/drivers/staging/rtl8192e/rtl819x_TSProc.c
index 6c51323104e5..b14ed3534ffa 100644
--- a/drivers/staging/rtl8192e/rtl819x_TSProc.c
+++ b/drivers/staging/rtl8192e/rtl819x_TSProc.c
@@ -104,7 +104,7 @@ static void ResetTsCommonInfo(struct ts_common_info *pTsCommonInfo)
{
eth_zero_addr(pTsCommonInfo->Addr);
memset(&pTsCommonInfo->TSpec, 0, sizeof(union tspec_body));
- memset(&pTsCommonInfo->TClass, 0, sizeof(union qos_tclas)*TCLAS_NUM);
+ memset(&pTsCommonInfo->TClass, 0, sizeof(union qos_tclas) * TCLAS_NUM);
pTsCommonInfo->TClasProc = 0;
pTsCommonInfo->TClasNum = 0;
}
@@ -188,9 +188,9 @@ void TSInitialize(struct rtllib_device *ieee)
for (count = 0; count < REORDER_ENTRY_NUM; count++) {
list_add_tail(&pRxReorderEntry->List,
&ieee->RxReorder_Unused_List);
- if (count == (REORDER_ENTRY_NUM-1))
+ if (count == (REORDER_ENTRY_NUM - 1))
break;
- pRxReorderEntry = &ieee->RxReorderEntry[count+1];
+ pRxReorderEntry = &ieee->RxReorderEntry[count + 1];
}
}
@@ -517,7 +517,7 @@ void TsStartAddBaProcess(struct rtllib_device *ieee, struct tx_ts_record *pTxTS)
msecs_to_jiffies(TS_ADDBA_DELAY));
} else {
netdev_dbg(ieee->dev, "Immediately Start ADDBA\n");
- mod_timer(&pTxTS->TsAddBaTimer, jiffies+10);
+ mod_timer(&pTxTS->TsAddBaTimer, jiffies + 10);
}
} else
netdev_dbg(ieee->dev, "BA timer is already added\n");
--
2.30.2
next prev parent reply other threads:[~2021-04-14 6:56 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-14 6:54 Subject: [PATCH v2 0/5] staging: rtl8192e: CLeanup patchset for style issues in rtl819x_Y.c files Mitali Borkar
2021-04-14 6:55 ` Mitali Borkar [this message]
2021-04-14 6:55 ` [PATCH v2 2/5] staging: rtl8192e: remove unnecessary blank line before brace Mitali Borkar
2021-04-14 6:55 ` [PATCH v2 3/5] staging: rtl8192e: remove unnecessary blank line after close brace Mitali Borkar
2021-04-14 6:56 ` [PATCH v2 4/5] staging: rtl8192e: rectified spelling mistake and replace memcmp with ether_oui_equal Mitali Borkar
2021-04-14 7:55 ` Dan Carpenter
2021-04-15 14:03 ` Mitali Borkar
2021-04-14 8:16 ` Greg KH
2021-04-15 13:42 ` Mitali Borkar
2021-04-15 14:02 ` Greg KH
2021-04-14 6:56 ` [PATCH v2 5/5] staging: rtl8192e: removed multiple blank lines Mitali Borkar
2021-04-14 8:20 ` Subject: [PATCH v2 0/5] staging: rtl8192e: CLeanup patchset for style issues in rtl819x_Y.c files Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=28cbc4825fdfacf5d5ea8bb688a8bd6a1c65f059.1618380932.git.mitaliborkar810@gmail.com \
--to=mitaliborkar810@gmail.com \
--cc=davem@davemloft.net \
--cc=gregkh@linuxfoundation.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=mitali_s@me.iitr.ac.in \
--cc=outreachy-kernel@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).