From: Alexandre Torgue <alexandre.torgue@foss.st.com>
To: <arnd@arndb.de>, <robh+dt@kernel.org>,
Marek Vasut <marex@denx.de>, <jagan@amarulasolutions.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
Marcin Sloniewski <marcin.sloniewski@gmail.com>,
Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-kernel@vger.kernel.org>, Lee Jones <lee.jones@linaro.org>,
<kuba@kernel.org>
Subject: [PATCH 03/13] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
Date: Thu, 15 Apr 2021 12:10:27 +0200 [thread overview]
Message-ID: <20210415101037.1465-4-alexandre.torgue@foss.st.com> (raw)
In-Reply-To: <20210415101037.1465-1-alexandre.torgue@foss.st.com>
Prevent warning seen with "make dtbs_check W=1" command:
Warning (avoid_unnecessary_addr_size): /soc/timers@40001c00: unnecessary
address-cells/size-cells without "ranges" or child "reg" property
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 41e0087bdbf9..8748d5850298 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -283,8 +283,6 @@
};
timers13: timers@40001c00 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40001C00 0x400>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM13)>;
@@ -299,8 +297,6 @@
};
timers14: timers@40002000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40002000 0x400>;
clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM14)>;
@@ -633,8 +629,6 @@
};
timers10: timers@40014400 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40014400 0x400>;
clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM10)>;
@@ -649,8 +643,6 @@
};
timers11: timers@40014800 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40014800 0x400>;
clocks = <&rcc 0 STM32F4_APB2_CLOCK(TIM11)>;
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index e1df603fc981..72c1b76684b6 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -265,8 +265,6 @@
};
timers13: timers@40001c00 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40001C00 0x400>;
clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM13)>;
@@ -281,8 +279,6 @@
};
timers14: timers@40002000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40002000 0x400>;
clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM14)>;
@@ -531,8 +527,6 @@
};
timers10: timers@40014400 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40014400 0x400>;
clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM10)>;
@@ -547,8 +541,6 @@
};
timers11: timers@40014800 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-timers";
reg = <0x40014800 0x400>;
clocks = <&rcc 0 STM32F7_APB2_CLOCK(TIM11)>;
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 05ecdf9ff03a..6e42ca2dada2 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -485,8 +485,6 @@
};
lptimer4: timer@58002c00 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-lptimer";
reg = <0x58002c00 0x400>;
clocks = <&rcc LPTIM4_CK>;
@@ -501,8 +499,6 @@
};
lptimer5: timer@58003000 {
- #address-cells = <1>;
- #size-cells = <0>;
compatible = "st,stm32-lptimer";
reg = <0x58003000 0x400>;
clocks = <&rcc LPTIM5_CK>;
--
2.17.1
next prev parent reply other threads:[~2021-04-15 10:11 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-15 10:10 [PATCH 00/13] ARM: dts: stm32: fix "make dtbs_check W=1" round1 Alexandre Torgue
2021-04-15 10:10 ` [PATCH 01/13] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards Alexandre Torgue
2021-04-15 10:10 ` [PATCH 02/13] ARM: dts: stm32: fix RCC node name on stm32f429 MCU Alexandre Torgue
2021-04-15 10:10 ` Alexandre Torgue [this message]
2021-04-16 15:52 ` [Linux-stm32] [PATCH 03/13] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings Fabrice Gasnier
2021-04-15 10:10 ` [PATCH 04/13] dt-bindings: mfd: stm32-timers: remove #address/size cells from required properties Alexandre Torgue
2021-04-16 15:52 ` [Linux-stm32] " Fabrice Gasnier
2021-04-20 20:04 ` Rob Herring
2021-06-01 16:26 ` Lee Jones
2021-04-15 10:10 ` [PATCH 05/13] ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings Alexandre Torgue
2021-04-15 10:10 ` [PATCH 06/13] ARM: dts: stm32: fix i2c node name on stm32f746 " Alexandre Torgue
2021-04-15 10:10 ` [PATCH 07/13] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 Alexandre Torgue
2021-04-15 10:10 ` [PATCH 08/13] dt-bindings: net: document ptp_ref clk in dwmac Alexandre Torgue
2021-04-20 20:05 ` Rob Herring
2021-04-15 10:10 ` [PATCH 09/13] ARM: dts: stm32: fix stpmic node for stm32mp1 boards Alexandre Torgue
2021-06-10 14:33 ` Alexandre TORGUE
2021-04-15 10:10 ` [PATCH 10/13] dt-bindings: mfd: add vref_ddr-supply to st,stpmic1 yaml Alexandre Torgue
2021-04-15 10:51 ` Ahmad Fatoum
2021-04-15 12:12 ` Alexandre TORGUE
2021-04-15 10:10 ` [PATCH 11/13] ARM: dts: stm32: fix LTDC port node on STM32 MCU ad MPU Alexandre Torgue
2021-04-15 13:21 ` Marek Vasut
2021-04-15 13:34 ` Alexandre TORGUE
2021-04-15 14:30 ` Marek Vasut
2021-04-15 14:35 ` Alexandre TORGUE
2021-04-15 14:59 ` Marek Vasut
2021-04-15 10:10 ` [PATCH 12/13] ARM: dts: stm32: fix DSI port node on STM32MP15 Alexandre Torgue
2021-04-15 10:43 ` Ahmad Fatoum
2021-04-15 12:23 ` Alexandre TORGUE
2021-04-19 13:57 ` Arnd Bergmann
2021-04-19 14:04 ` Alexandre TORGUE
2021-05-04 13:16 ` Ahmad Fatoum
2021-04-15 10:10 ` [PATCH 13/13] ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7 Alexandre Torgue
2021-06-01 10:37 ` [PATCH 00/13] ARM: dts: stm32: fix "make dtbs_check W=1" round1 Alexandre TORGUE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210415101037.1465-4-alexandre.torgue@foss.st.com \
--to=alexandre.torgue@foss.st.com \
--cc=a.fatoum@pengutronix.de \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=jagan@amarulasolutions.com \
--cc=kuba@kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=manivannan.sadhasivam@linaro.org \
--cc=marcin.sloniewski@gmail.com \
--cc=marex@denx.de \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).