From: Alexandre Torgue <alexandre.torgue@foss.st.com>
To: <arnd@arndb.de>, <robh+dt@kernel.org>,
Marek Vasut <marex@denx.de>, <jagan@amarulasolutions.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
Marcin Sloniewski <marcin.sloniewski@gmail.com>,
Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-kernel@vger.kernel.org>, Lee Jones <lee.jones@linaro.org>,
<kuba@kernel.org>
Subject: [PATCH 11/13] ARM: dts: stm32: fix LTDC port node on STM32 MCU ad MPU
Date: Thu, 15 Apr 2021 12:10:35 +0200 [thread overview]
Message-ID: <20210415101037.1465-12-alexandre.torgue@foss.st.com> (raw)
In-Reply-To: <20210415101037.1465-1-alexandre.torgue@foss.st.com>
Running "make dtbs_check W=1", some warnings are reported concerning
LTDC port subnode:
/soc/display-controller@5a001000/port:
unnecessary #address-cells/#size-cells without "ranges" or child "reg"
property
/soc/display-controller@5a001000/port: graph node has single child node
'endpoint', #address-cells/#size-cells are not necessary
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 8c982ae79f43..f530f84474ea 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -175,7 +175,7 @@
status = "okay";
port {
- ltdc_out_dsi: endpoint@0 {
+ ltdc_out_dsi: endpoint {
remote-endpoint = <&dsi_in>;
};
};
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 8aa87cb86821..98a703d1c3a0 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1471,11 +1471,7 @@
resets = <&rcc LTDC_R>;
status = "disabled";
- port {
- #address-cells = <1>;
- #size-cells = <0>;
};
- };
iwdg2: watchdog@5a002000 {
compatible = "st,stm32mp1-iwdg";
diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index 4c8be9c8eb20..c06763d24890 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -26,3 +26,11 @@
stdout-path = "serial0:115200n8";
};
};
+
+<dc {
+ port {
+ ltdc_ep0_out: endpoint {
+ remote-endpoint = <&sii9022_in>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
index 674b2d330dc4..ba1e2d7f06bf 100644
--- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -81,8 +81,7 @@
status = "okay";
port {
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
+ ltdc_ep0_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
index 2bc92ef3aeb9..19ef475a48fc 100644
--- a/arch/arm/boot/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -82,9 +82,15 @@
};
<dc {
- status = "okay";
-
port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ltdc_ep0_out: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&sii9022_in>;
+ };
+
ltdc_ep1_out: endpoint@1 {
reg = <1>;
remote-endpoint = <&dsi_in>;
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 5c5b1ddf7bfd..6fe5b0fee7c4 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -239,8 +239,7 @@
status = "okay";
port {
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
+ ltdc_ep0_out: endpoint {
remote-endpoint = <&dsi_in>;
};
};
diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
index 1e9bf7eea0f1..70202ef5267c 100644
--- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
@@ -161,8 +161,7 @@
status = "okay";
port {
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
+ ltdc_ep0_out: endpoint {
remote-endpoint = <&panel_input>;
};
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index 64dca5b7f748..e7f10975cacf 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -277,11 +277,7 @@
status = "okay";
port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
+ ltdc_ep0_out: endpoint {
remote-endpoint = <&adv7513_in>;
};
};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 59f18846cf5d..ca2d21689ecc 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -458,13 +458,6 @@
pinctrl-0 = <<dc_pins_a>;
pinctrl-1 = <<dc_sleep_pins_a>;
status = "okay";
-
- port {
- ltdc_ep0_out: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&sii9022_in>;
- };
- };
};
&m4_rproc {
--
2.17.1
next prev parent reply other threads:[~2021-04-15 10:11 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-15 10:10 [PATCH 00/13] ARM: dts: stm32: fix "make dtbs_check W=1" round1 Alexandre Torgue
2021-04-15 10:10 ` [PATCH 01/13] ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards Alexandre Torgue
2021-04-15 10:10 ` [PATCH 02/13] ARM: dts: stm32: fix RCC node name on stm32f429 MCU Alexandre Torgue
2021-04-15 10:10 ` [PATCH 03/13] ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings Alexandre Torgue
2021-04-16 15:52 ` [Linux-stm32] " Fabrice Gasnier
2021-04-15 10:10 ` [PATCH 04/13] dt-bindings: mfd: stm32-timers: remove #address/size cells from required properties Alexandre Torgue
2021-04-16 15:52 ` [Linux-stm32] " Fabrice Gasnier
2021-04-20 20:04 ` Rob Herring
2021-06-01 16:26 ` Lee Jones
2021-04-15 10:10 ` [PATCH 05/13] ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings Alexandre Torgue
2021-04-15 10:10 ` [PATCH 06/13] ARM: dts: stm32: fix i2c node name on stm32f746 " Alexandre Torgue
2021-04-15 10:10 ` [PATCH 07/13] ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15 Alexandre Torgue
2021-04-15 10:10 ` [PATCH 08/13] dt-bindings: net: document ptp_ref clk in dwmac Alexandre Torgue
2021-04-20 20:05 ` Rob Herring
2021-04-15 10:10 ` [PATCH 09/13] ARM: dts: stm32: fix stpmic node for stm32mp1 boards Alexandre Torgue
2021-06-10 14:33 ` Alexandre TORGUE
2021-04-15 10:10 ` [PATCH 10/13] dt-bindings: mfd: add vref_ddr-supply to st,stpmic1 yaml Alexandre Torgue
2021-04-15 10:51 ` Ahmad Fatoum
2021-04-15 12:12 ` Alexandre TORGUE
2021-04-15 10:10 ` Alexandre Torgue [this message]
2021-04-15 13:21 ` [PATCH 11/13] ARM: dts: stm32: fix LTDC port node on STM32 MCU ad MPU Marek Vasut
2021-04-15 13:34 ` Alexandre TORGUE
2021-04-15 14:30 ` Marek Vasut
2021-04-15 14:35 ` Alexandre TORGUE
2021-04-15 14:59 ` Marek Vasut
2021-04-15 10:10 ` [PATCH 12/13] ARM: dts: stm32: fix DSI port node on STM32MP15 Alexandre Torgue
2021-04-15 10:43 ` Ahmad Fatoum
2021-04-15 12:23 ` Alexandre TORGUE
2021-04-19 13:57 ` Arnd Bergmann
2021-04-19 14:04 ` Alexandre TORGUE
2021-05-04 13:16 ` Ahmad Fatoum
2021-04-15 10:10 ` [PATCH 13/13] ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7 Alexandre Torgue
2021-06-01 10:37 ` [PATCH 00/13] ARM: dts: stm32: fix "make dtbs_check W=1" round1 Alexandre TORGUE
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210415101037.1465-12-alexandre.torgue@foss.st.com \
--to=alexandre.torgue@foss.st.com \
--cc=a.fatoum@pengutronix.de \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=jagan@amarulasolutions.com \
--cc=kuba@kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=manivannan.sadhasivam@linaro.org \
--cc=marcin.sloniewski@gmail.com \
--cc=marex@denx.de \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).