From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, "Pali Rohár" <pali@kernel.org>,
"Andrew Lunn" <andrew@lunn.ch>,
"Russell King" <rmk+kernel@armlinux.org.uk>,
"David S. Miller" <davem@davemloft.net>
Subject: [PATCH 5.10 23/25] net: sfp: relax bitrate-derived mode check
Date: Thu, 15 Apr 2021 16:48:17 +0200 [thread overview]
Message-ID: <20210415144413.883930924@linuxfoundation.org> (raw)
In-Reply-To: <20210415144413.165663182@linuxfoundation.org>
From: Russell King <rmk+kernel@armlinux.org.uk>
commit 7a77233ec6d114322e2c4f71b4e26dbecd9ea8a7 upstream.
Do not check the encoding when deriving 1000BASE-X from the bitrate
when no other modes are discovered. Some GPON modules (VSOL V2801F
and CarlitoxxPro CPGOS03-0490 v2.0) indicate NRZ encoding with a
1200Mbaud bitrate, but should be driven with 1000BASE-X on the host
side.
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/phy/sfp-bus.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -349,14 +349,13 @@ void sfp_parse_support(struct sfp_bus *b
}
/* If we haven't discovered any modes that this module supports, try
- * the encoding and bitrate to determine supported modes. Some BiDi
- * modules (eg, 1310nm/1550nm) are not 1000BASE-BX compliant due to
- * the differing wavelengths, so do not set any transceiver bits.
+ * the bitrate to determine supported modes. Some BiDi modules (eg,
+ * 1310nm/1550nm) are not 1000BASE-BX compliant due to the differing
+ * wavelengths, so do not set any transceiver bits.
*/
if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS)) {
- /* If the encoding and bit rate allows 1000baseX */
- if (id->base.encoding == SFF8024_ENCODING_8B10B && br_nom &&
- br_min <= 1300 && br_max >= 1200)
+ /* If the bit rate allows 1000baseX */
+ if (br_nom && br_min <= 1300 && br_max >= 1200)
phylink_set(modes, 1000baseX_Full);
}
next prev parent reply other threads:[~2021-04-15 15:12 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-15 14:47 [PATCH 5.10 00/25] 5.10.31-rc1 review Greg Kroah-Hartman
2021-04-15 14:47 ` [PATCH 5.10 01/25] interconnect: core: fix error return code of icc_link_destroy() Greg Kroah-Hartman
2021-04-15 14:47 ` [PATCH 5.10 02/25] gfs2: Flag a withdraw if init_threads() fails Greg Kroah-Hartman
2021-04-15 14:47 ` [PATCH 5.10 03/25] KVM: arm64: Hide system instruction access to Trace registers Greg Kroah-Hartman
2021-04-15 14:47 ` [PATCH 5.10 04/25] KVM: arm64: Disable guest access to trace filter controls Greg Kroah-Hartman
2021-04-15 14:47 ` [PATCH 5.10 05/25] drm/imx: imx-ldb: fix out of bounds array access warning Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 06/25] gfs2: report "already frozen/thawed" errors Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 07/25] ftrace: Check if pages were allocated before calling free_pages() Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 08/25] tools/kvm_stat: Add restart delay Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 09/25] drm/tegra: dc: Dont set PLL clock to 0Hz Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 10/25] gpu: host1x: Use different lock classes for each client Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 11/25] XArray: Fix splitting to non-zero orders Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 12/25] radix tree test suite: Fix compilation Greg Kroah-Hartman
2021-04-15 15:12 ` Matthew Wilcox
2021-04-16 0:06 ` Sasha Levin
2021-04-15 14:48 ` [PATCH 5.10 13/25] block: only update parent bi_status when bio fail Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 14/25] radix tree test suite: Register the main thread with the RCU library Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 15/25] idr test suite: Take RCU read lock in idr_find_test_1 Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 16/25] idr test suite: Create anchor before launching throbber Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 17/25] null_blk: fix command timeout completion handling Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 18/25] io_uring: dont mark S_ISBLK async work as unbounded Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 19/25] riscv,entry: fix misaligned base for excp_vect_table Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 20/25] block: dont ignore REQ_NOWAIT for direct IO Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 21/25] netfilter: x_tables: fix compat match/target pad out-of-bound write Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 22/25] perf map: Tighten snprintf() string precision to pass gcc check on some 32-bit arches Greg Kroah-Hartman
2021-04-15 14:48 ` Greg Kroah-Hartman [this message]
2021-04-15 14:48 ` [PATCH 5.10 24/25] net: sfp: cope with SFPs that set both LOS normal and LOS inverted Greg Kroah-Hartman
2021-04-15 14:48 ` [PATCH 5.10 25/25] xen/events: fix setting irq affinity Greg Kroah-Hartman
2021-04-15 19:11 ` [PATCH 5.10 00/25] 5.10.31-rc1 review Pavel Machek
2021-04-15 20:03 ` Andrei Rabusov
2021-04-15 22:42 ` Shuah Khan
2021-04-16 0:52 ` Florian Fainelli
2021-04-16 9:38 ` Naresh Kamboju
2021-04-16 19:57 ` Fox Chen
2021-04-16 20:07 ` Sudip Mukherjee
2021-04-17 1:01 ` Samuel Zou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210415144413.883930924@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=pali@kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).