From: <stefanc@marvell.com>
To: <netdev@vger.kernel.org>
Cc: <thomas.petazzoni@bootlin.com>, <davem@davemloft.net>,
<nadavh@marvell.com>, <ymarkman@marvell.com>,
<linux-kernel@vger.kernel.org>, <stefanc@marvell.com>,
<kuba@kernel.org>, <linux@armlinux.org.uk>, <mw@semihalf.com>,
<andrew@lunn.ch>, <rmk+kernel@armlinux.org.uk>,
<atenart@kernel.org>, <lironh@marvell.com>, <danat@marvell.com>
Subject: [PATCH V2 net-next] net: mvpp2: Add parsing support for different IPv4 IHL values
Date: Fri, 16 Apr 2021 11:15:17 +0300 [thread overview]
Message-ID: <1618560917-31548-1-git-send-email-stefanc@marvell.com> (raw)
From: Stefan Chulski <stefanc@marvell.com>
Add parser entries for different IPv4 IHL values.
Each entry will set the L4 header offset according to the IPv4 IHL field.
L3 header offset will set during the parsing of the IPv4 protocol.
Because of missed parser support for IP header length > 20, RX IPv4 checksum HW offload fails
and skb->ip_summed set to CHECKSUM_NONE(checksum done by Network stack).
This patch adds RX IPv4 checksum HW offload capability for frames with IP header length > 20.
v1 --> v2
- Improve commit message.
Suggested-by: Dana Vardi <danat@marvell.com>
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c | 107 ++++++++------------
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.h | 3 +-
2 files changed, 43 insertions(+), 67 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
index 4812cdb..7cc7d72 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
@@ -918,9 +918,8 @@ static int mvpp2_prs_ip4_proto(struct mvpp2 *priv, unsigned short proto,
mvpp2_prs_sram_next_lu_set(&pe, MVPP2_PRS_LU_FLOWS);
mvpp2_prs_sram_bits_set(&pe, MVPP2_PRS_SRAM_LU_GEN_BIT, 1);
- /* Set L4 offset */
- mvpp2_prs_sram_offset_set(&pe, MVPP2_PRS_SRAM_UDF_TYPE_L4,
- sizeof(struct iphdr) - 4,
+ /* Set L3 offset */
+ mvpp2_prs_sram_offset_set(&pe, MVPP2_PRS_SRAM_UDF_TYPE_L3, -4,
MVPP2_PRS_SRAM_OP_SEL_UDF_ADD);
mvpp2_prs_sram_ai_update(&pe, 0, MVPP2_PRS_IPV4_DIP_AI_BIT);
mvpp2_prs_sram_ri_update(&pe, ri, ri_mask | MVPP2_PRS_RI_IP_FRAG_MASK);
@@ -1335,7 +1334,7 @@ static void mvpp2_prs_vid_init(struct mvpp2 *priv)
static int mvpp2_prs_etype_init(struct mvpp2 *priv)
{
struct mvpp2_prs_entry pe;
- int tid;
+ int tid, ihl;
/* Ethertype: PPPoE */
tid = mvpp2_prs_tcam_first_free(priv, MVPP2_PE_FIRST_FREE_TID,
@@ -1427,67 +1426,43 @@ static int mvpp2_prs_etype_init(struct mvpp2 *priv)
MVPP2_PRS_RI_UDF3_MASK);
mvpp2_prs_hw_write(priv, &pe);
- /* Ethertype: IPv4 without options */
- tid = mvpp2_prs_tcam_first_free(priv, MVPP2_PE_FIRST_FREE_TID,
- MVPP2_PE_LAST_FREE_TID);
- if (tid < 0)
- return tid;
-
- memset(&pe, 0, sizeof(pe));
- mvpp2_prs_tcam_lu_set(&pe, MVPP2_PRS_LU_L2);
- pe.index = tid;
-
- mvpp2_prs_match_etype(&pe, 0, ETH_P_IP);
- mvpp2_prs_tcam_data_byte_set(&pe, MVPP2_ETH_TYPE_LEN,
- MVPP2_PRS_IPV4_HEAD | MVPP2_PRS_IPV4_IHL,
- MVPP2_PRS_IPV4_HEAD_MASK |
- MVPP2_PRS_IPV4_IHL_MASK);
-
- mvpp2_prs_sram_next_lu_set(&pe, MVPP2_PRS_LU_IP4);
- mvpp2_prs_sram_ri_update(&pe, MVPP2_PRS_RI_L3_IP4,
- MVPP2_PRS_RI_L3_PROTO_MASK);
- /* goto ipv4 dest-address (skip eth_type + IP-header-size - 4) */
- mvpp2_prs_sram_shift_set(&pe, MVPP2_ETH_TYPE_LEN +
- sizeof(struct iphdr) - 4,
- MVPP2_PRS_SRAM_OP_SEL_SHIFT_ADD);
- /* Set L3 offset */
- mvpp2_prs_sram_offset_set(&pe, MVPP2_PRS_SRAM_UDF_TYPE_L3,
- MVPP2_ETH_TYPE_LEN,
- MVPP2_PRS_SRAM_OP_SEL_UDF_ADD);
-
- /* Update shadow table and hw entry */
- mvpp2_prs_shadow_set(priv, pe.index, MVPP2_PRS_LU_L2);
- priv->prs_shadow[pe.index].udf = MVPP2_PRS_UDF_L2_DEF;
- priv->prs_shadow[pe.index].finish = false;
- mvpp2_prs_shadow_ri_set(priv, pe.index, MVPP2_PRS_RI_L3_IP4,
- MVPP2_PRS_RI_L3_PROTO_MASK);
- mvpp2_prs_hw_write(priv, &pe);
-
- /* Ethertype: IPv4 with options */
- tid = mvpp2_prs_tcam_first_free(priv, MVPP2_PE_FIRST_FREE_TID,
- MVPP2_PE_LAST_FREE_TID);
- if (tid < 0)
- return tid;
-
- pe.index = tid;
+ /* Ethertype: IPv4 with header length >= 5 */
+ for (ihl = MVPP2_PRS_IPV4_IHL_MIN; ihl <= MVPP2_PRS_IPV4_IHL_MAX; ihl++) {
+ tid = mvpp2_prs_tcam_first_free(priv, MVPP2_PE_FIRST_FREE_TID,
+ MVPP2_PE_LAST_FREE_TID);
+ if (tid < 0)
+ return tid;
- mvpp2_prs_tcam_data_byte_set(&pe, MVPP2_ETH_TYPE_LEN,
- MVPP2_PRS_IPV4_HEAD,
- MVPP2_PRS_IPV4_HEAD_MASK);
+ memset(&pe, 0, sizeof(pe));
+ mvpp2_prs_tcam_lu_set(&pe, MVPP2_PRS_LU_L2);
+ pe.index = tid;
- /* Clear ri before updating */
- pe.sram[MVPP2_PRS_SRAM_RI_WORD] = 0x0;
- pe.sram[MVPP2_PRS_SRAM_RI_CTRL_WORD] = 0x0;
- mvpp2_prs_sram_ri_update(&pe, MVPP2_PRS_RI_L3_IP4_OPT,
- MVPP2_PRS_RI_L3_PROTO_MASK);
+ mvpp2_prs_match_etype(&pe, 0, ETH_P_IP);
+ mvpp2_prs_tcam_data_byte_set(&pe, MVPP2_ETH_TYPE_LEN,
+ MVPP2_PRS_IPV4_HEAD | ihl,
+ MVPP2_PRS_IPV4_HEAD_MASK |
+ MVPP2_PRS_IPV4_IHL_MASK);
+
+ mvpp2_prs_sram_next_lu_set(&pe, MVPP2_PRS_LU_IP4);
+ mvpp2_prs_sram_ri_update(&pe, MVPP2_PRS_RI_L3_IP4,
+ MVPP2_PRS_RI_L3_PROTO_MASK);
+ /* goto ipv4 dst-address (skip eth_type + IP-header-size - 4) */
+ mvpp2_prs_sram_shift_set(&pe, MVPP2_ETH_TYPE_LEN +
+ sizeof(struct iphdr) - 4,
+ MVPP2_PRS_SRAM_OP_SEL_SHIFT_ADD);
+ /* Set L4 offset */
+ mvpp2_prs_sram_offset_set(&pe, MVPP2_PRS_SRAM_UDF_TYPE_L4,
+ MVPP2_ETH_TYPE_LEN + (ihl * 4),
+ MVPP2_PRS_SRAM_OP_SEL_UDF_ADD);
- /* Update shadow table and hw entry */
- mvpp2_prs_shadow_set(priv, pe.index, MVPP2_PRS_LU_L2);
- priv->prs_shadow[pe.index].udf = MVPP2_PRS_UDF_L2_DEF;
- priv->prs_shadow[pe.index].finish = false;
- mvpp2_prs_shadow_ri_set(priv, pe.index, MVPP2_PRS_RI_L3_IP4_OPT,
- MVPP2_PRS_RI_L3_PROTO_MASK);
- mvpp2_prs_hw_write(priv, &pe);
+ /* Update shadow table and hw entry */
+ mvpp2_prs_shadow_set(priv, pe.index, MVPP2_PRS_LU_L2);
+ priv->prs_shadow[pe.index].udf = MVPP2_PRS_UDF_L2_DEF;
+ priv->prs_shadow[pe.index].finish = false;
+ mvpp2_prs_shadow_ri_set(priv, pe.index, MVPP2_PRS_RI_L3_IP4,
+ MVPP2_PRS_RI_L3_PROTO_MASK);
+ mvpp2_prs_hw_write(priv, &pe);
+ }
/* Ethertype: IPv6 without options */
tid = mvpp2_prs_tcam_first_free(priv, MVPP2_PE_FIRST_FREE_TID,
@@ -1674,7 +1649,8 @@ static int mvpp2_prs_pppoe_init(struct mvpp2 *priv)
pe.index = tid;
mvpp2_prs_tcam_data_byte_set(&pe, MVPP2_ETH_TYPE_LEN,
- MVPP2_PRS_IPV4_HEAD | MVPP2_PRS_IPV4_IHL,
+ MVPP2_PRS_IPV4_HEAD |
+ MVPP2_PRS_IPV4_IHL_MIN,
MVPP2_PRS_IPV4_HEAD_MASK |
MVPP2_PRS_IPV4_IHL_MASK);
@@ -1788,9 +1764,8 @@ static int mvpp2_prs_ip4_init(struct mvpp2 *priv)
mvpp2_prs_sram_next_lu_set(&pe, MVPP2_PRS_LU_FLOWS);
mvpp2_prs_sram_bits_set(&pe, MVPP2_PRS_SRAM_LU_GEN_BIT, 1);
- /* Set L4 offset */
- mvpp2_prs_sram_offset_set(&pe, MVPP2_PRS_SRAM_UDF_TYPE_L4,
- sizeof(struct iphdr) - 4,
+ /* Set L3 offset */
+ mvpp2_prs_sram_offset_set(&pe, MVPP2_PRS_SRAM_UDF_TYPE_L3, -4,
MVPP2_PRS_SRAM_OP_SEL_UDF_ADD);
mvpp2_prs_sram_ai_update(&pe, 0, MVPP2_PRS_IPV4_DIP_AI_BIT);
mvpp2_prs_sram_ri_update(&pe, MVPP2_PRS_RI_L4_OTHER,
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.h
index c16e5b9..5ce5907 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.h
@@ -28,7 +28,8 @@
#define MVPP2_PRS_IPV4_MC 0xe0
#define MVPP2_PRS_IPV4_MC_MASK 0xf0
#define MVPP2_PRS_IPV4_BC_MASK 0xff
-#define MVPP2_PRS_IPV4_IHL 0x5
+#define MVPP2_PRS_IPV4_IHL_MIN 0x5
+#define MVPP2_PRS_IPV4_IHL_MAX 0xf
#define MVPP2_PRS_IPV4_IHL_MASK 0xf
#define MVPP2_PRS_IPV6_MC 0xff
#define MVPP2_PRS_IPV6_MC_MASK 0xff
--
1.9.1
next reply other threads:[~2021-04-16 8:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-16 8:15 stefanc [this message]
2021-04-16 22:40 ` [PATCH V2 net-next] net: mvpp2: Add parsing support for different IPv4 IHL values patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1618560917-31548-1-git-send-email-stefanc@marvell.com \
--to=stefanc@marvell.com \
--cc=andrew@lunn.ch \
--cc=atenart@kernel.org \
--cc=danat@marvell.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=lironh@marvell.com \
--cc=mw@semihalf.com \
--cc=nadavh@marvell.com \
--cc=netdev@vger.kernel.org \
--cc=rmk+kernel@armlinux.org.uk \
--cc=thomas.petazzoni@bootlin.com \
--cc=ymarkman@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).