[v3,2/2] can: m_can: Add support for transceiver as phy
diff mbox series

Message ID 20210416114245.24829-3-a-govindraju@ti.com
State New
Headers show
Series
  • MCAN: Add support for implementing transceiver as a phy
Related show

Commit Message

Aswath Govindraju April 16, 2021, 11:42 a.m. UTC
From: Faiz Abbas <faiz_abbas@ti.com>

Add support for implementing transceiver node as phy. The max_bitrate is
obtained by getting a phy attribute.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
---
 drivers/net/can/m_can/m_can.c          | 10 ++++++++++
 drivers/net/can/m_can/m_can.h          |  2 ++
 drivers/net/can/m_can/m_can_platform.c | 13 +++++++++++++
 3 files changed, 25 insertions(+)

Patch
diff mbox series

diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 34073cd077e4..7d31250446c2 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -21,6 +21,7 @@ 
 #include <linux/iopoll.h>
 #include <linux/can/dev.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/phy/phy.h>
 
 #include "m_can.h"
 
@@ -1514,6 +1515,7 @@  static void m_can_stop(struct net_device *dev)
 static int m_can_close(struct net_device *dev)
 {
 	struct m_can_classdev *cdev = netdev_priv(dev);
+	int err;
 
 	netif_stop_queue(dev);
 
@@ -1536,6 +1538,10 @@  static int m_can_close(struct net_device *dev)
 	close_candev(dev);
 	can_led_event(dev, CAN_LED_EVENT_STOP);
 
+	err = phy_power_off(cdev->transceiver);
+	if (err)
+		return err;
+
 	return 0;
 }
 
@@ -1720,6 +1726,10 @@  static int m_can_open(struct net_device *dev)
 	struct m_can_classdev *cdev = netdev_priv(dev);
 	int err;
 
+	err = phy_power_on(cdev->transceiver);
+	if (err)
+		return err;
+
 	err = m_can_clk_start(cdev);
 	if (err)
 		return err;
diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
index ace071c3e58c..38cad068abad 100644
--- a/drivers/net/can/m_can/m_can.h
+++ b/drivers/net/can/m_can/m_can.h
@@ -28,6 +28,7 @@ 
 #include <linux/iopoll.h>
 #include <linux/can/dev.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/phy/phy.h>
 
 /* m_can lec values */
 enum m_can_lec_type {
@@ -82,6 +83,7 @@  struct m_can_classdev {
 	struct workqueue_struct *tx_wq;
 	struct work_struct tx_work;
 	struct sk_buff *tx_skb;
+	struct phy *transceiver;
 
 	struct can_bittiming_const *bit_timing;
 	struct can_bittiming_const *data_timing;
diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
index 599de0e08cd7..f102d532b7f0 100644
--- a/drivers/net/can/m_can/m_can_platform.c
+++ b/drivers/net/can/m_can/m_can_platform.c
@@ -6,6 +6,7 @@ 
 // Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
 
 #include <linux/platform_device.h>
+#include <linux/phy/phy.h>
 
 #include "m_can.h"
 
@@ -67,6 +68,7 @@  static int m_can_plat_probe(struct platform_device *pdev)
 	struct resource *res;
 	void __iomem *addr;
 	void __iomem *mram_addr;
+	struct phy *transceiver;
 	int irq, ret = 0;
 
 	mcan_class = m_can_class_allocate_dev(&pdev->dev,
@@ -101,6 +103,16 @@  static int m_can_plat_probe(struct platform_device *pdev)
 		goto probe_fail;
 	}
 
+	transceiver = devm_phy_optional_get(&pdev->dev, NULL);
+	if (IS_ERR(transceiver)) {
+		ret = PTR_ERR(transceiver);
+		dev_err_probe(&pdev->dev, ret, "failed to get phy\n");
+		return ret;
+	}
+
+	if (transceiver)
+		mcan_class->can.bitrate_max = transceiver->attrs.max_link_rate;
+
 	priv->base = addr;
 	priv->mram_base = mram_addr;
 
@@ -108,6 +120,7 @@  static int m_can_plat_probe(struct platform_device *pdev)
 	mcan_class->pm_clock_support = 1;
 	mcan_class->can.clock.freq = clk_get_rate(mcan_class->cclk);
 	mcan_class->dev = &pdev->dev;
+	mcan_class->transceiver = transceiver;
 
 	mcan_class->ops = &m_can_plat_ops;