From: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
To: Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: John Youn <John.Youn@synopsys.com>,
Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Subject: [PATCH v2 09/15] usb: dwc2: Move exit hibernation to dwc2_port_resume() function
Date: Fri, 16 Apr 2021 16:47:54 +0400 [thread overview]
Message-ID: <20210416124755.E47F3A005D@mailhost.synopsys.com> (raw)
In-Reply-To: <cover.1618464534.git.Arthur.Petrosyan@synopsys.com>
This move is done to call hibernation exit handler in
"dwc2_port_resume()" function when core receives port resume.
Otherwise it could be confusing to exit hibernation in
"dwc2_hcd_hub_control()" function but other power saving modes
in "dwc2_port_resume()" function.
Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
---
Changes in v2:
- None
drivers/usb/dwc2/hcd.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 43a2298b7d42..cc9ad6cf02d9 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -3383,6 +3383,11 @@ int dwc2_port_resume(struct dwc2_hsotg *hsotg)
"exit partial_power_down failed.\n");
break;
case DWC2_POWER_DOWN_PARAM_HIBERNATION:
+ /* Exit host hibernation. */
+ ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
+ if (ret)
+ dev_err(hsotg->dev, "exit hibernation failed.\n");
+ break;
case DWC2_POWER_DOWN_PARAM_NONE:
/*
* If not hibernation nor partial power down are supported,
@@ -3446,12 +3451,8 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
dev_dbg(hsotg->dev,
"ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
- if (hsotg->bus_suspended) {
- if (hsotg->hibernated)
- dwc2_exit_hibernation(hsotg, 0, 0, 1);
- else
- dwc2_port_resume(hsotg);
- }
+ if (hsotg->bus_suspended)
+ retval = dwc2_port_resume(hsotg);
break;
case USB_PORT_FEAT_POWER:
--
2.25.1
next prev parent reply other threads:[~2021-04-16 12:48 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1618464534.git.Arthur.Petrosyan@synopsys.com>
2021-04-15 5:39 ` [PATCH 01/15] usb: dwc2: Update exit hibernation when port reset is asserted Artur Petrosyan
2021-04-15 5:39 ` [PATCH 02/15] usb: dwc2: Reset DEVADDR after exiting gadget hibernation Artur Petrosyan
2021-04-15 5:39 ` [PATCH 03/15] usb: dwc2: Fix host mode hibernation exit with remote wakeup flow Artur Petrosyan
2021-04-15 5:39 ` [PATCH 04/15] usb: dwc2: Fix hibernation between host and device modes Artur Petrosyan
2021-04-15 5:40 ` [PATCH 05/15] usb: dwc2: Allow exiting hibernation from gpwrdn rst detect Artur Petrosyan
2021-04-15 5:40 ` [PATCH 06/15] usb: dwc2: Clear fifo_map when resetting core Artur Petrosyan
2021-04-15 5:40 ` [PATCH 07/15] usb: dwc2: Clear GINTSTS_RESTOREDONE bit after restore is generated Artur Petrosyan
2021-04-15 5:40 ` [PATCH 08/15] usb: dwc2: Move enter hibernation to dwc2_port_suspend() function Artur Petrosyan
2021-04-15 5:40 ` [PATCH 09/15] usb: dwc2: Move exit hibernation to dwc2_port_resume() function Artur Petrosyan
2021-04-15 5:40 ` [PATCH 10/15] usb: dwc2: Allow exit hibernation in urb enqueue Artur Petrosyan
2021-04-15 9:12 ` Sergei Shtylyov
2021-04-16 5:43 ` Artur Petrosyan
2021-04-16 7:05 ` Artur Petrosyan
2021-04-15 5:40 ` [PATCH 11/15] usb: dwc2: Add hibernation entering flow by system suspend Artur Petrosyan
2021-04-15 5:40 ` [PATCH 12/15] usb: dwc2: Add hibernation exiting flow by system resume Artur Petrosyan
2021-04-15 5:41 ` [PATCH 13/15] usb: dwc2: Add exit hibernation mode before removing drive Artur Petrosyan
2021-04-15 9:24 ` Sergei Shtylyov
2021-04-16 5:46 ` Artur Petrosyan
2021-04-15 9:50 ` kernel test robot
2021-04-15 13:40 ` [kbuild] " Dan Carpenter
2021-04-15 5:41 ` [PATCH 14/15] usb: dwc2: Update dwc2_handle_usb_suspend_intr function Artur Petrosyan
2021-04-15 5:41 ` [PATCH 15/15] usb: dwc2: Get rid of useless error checks in suspend interrupt Artur Petrosyan
2021-04-16 12:46 ` [PATCH v2 00/15] usb: dwc2: Fix Hibernation issues Artur Petrosyan
2021-04-16 12:46 ` [PATCH v2 01/15] usb: dwc2: Update exit hibernation when port reset is asserted Artur Petrosyan
2021-04-19 7:30 ` Minas Harutyunyan
2021-04-16 12:46 ` [PATCH v2 02/15] usb: dwc2: Reset DEVADDR after exiting gadget hibernation Artur Petrosyan
2021-04-16 12:47 ` [PATCH v2 03/15] usb: dwc2: Fix host mode hibernation exit with remote wakeup flow Artur Petrosyan
2021-04-19 7:30 ` Minas Harutyunyan
2021-04-16 12:47 ` [PATCH v2 04/15] usb: dwc2: Fix hibernation between host and device modes Artur Petrosyan
2021-04-16 12:47 ` [PATCH v2 05/15] usb: dwc2: Allow exiting hibernation from gpwrdn rst detect Artur Petrosyan
2021-04-16 12:47 ` [PATCH v2 06/15] usb: dwc2: Clear fifo_map when resetting core Artur Petrosyan
2021-04-16 12:47 ` [PATCH v2 07/15] usb: dwc2: Clear GINTSTS_RESTOREDONE bit after restore is generated Artur Petrosyan
2021-04-16 12:47 ` [PATCH v2 08/15] usb: dwc2: Move enter hibernation to dwc2_port_suspend() function Artur Petrosyan
2021-04-19 7:31 ` Minas Harutyunyan
2021-04-16 12:47 ` Artur Petrosyan [this message]
2021-04-19 7:31 ` [PATCH v2 09/15] usb: dwc2: Move exit hibernation to dwc2_port_resume() function Minas Harutyunyan
2021-04-16 12:48 ` [PATCH v2 10/15] usb: dwc2: Allow exit hibernation in urb enqueue Artur Petrosyan
2021-04-19 7:31 ` Minas Harutyunyan
2021-04-16 12:48 ` [PATCH v2 11/15] usb: dwc2: Add hibernation entering flow by system suspend Artur Petrosyan
2021-04-19 7:31 ` Minas Harutyunyan
2021-04-16 12:48 ` [PATCH v2 12/15] usb: dwc2: Add hibernation exiting flow by system resume Artur Petrosyan
2021-04-19 7:31 ` Minas Harutyunyan
2021-04-16 12:48 ` [PATCH v2 13/15] usb: dwc2: Add exit hibernation mode before removing drive Artur Petrosyan
2021-04-19 7:32 ` Minas Harutyunyan
2021-04-16 12:48 ` [PATCH v2 14/15] usb: dwc2: Update dwc2_handle_usb_suspend_intr function Artur Petrosyan
2021-04-16 12:48 ` [PATCH v2 15/15] usb: dwc2: Get rid of useless error checks in suspend interrupt Artur Petrosyan
2021-04-19 7:32 ` Minas Harutyunyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210416124755.E47F3A005D@mailhost.synopsys.com \
--to=arthur.petrosyan@synopsys.com \
--cc=John.Youn@synopsys.com \
--cc=Minas.Harutyunyan@synopsys.com \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).