linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
To: Felipe Balbi <balbi@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: John Youn <John.Youn@synopsys.com>,
	Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Subject: [PATCH v2 13/15] usb: dwc2: Add exit hibernation mode before removing drive
Date: Fri, 16 Apr 2021 16:48:26 +0400	[thread overview]
Message-ID: <20210416124827.9BB59A005D@mailhost.synopsys.com> (raw)
In-Reply-To: <cover.1618464534.git.Arthur.Petrosyan@synopsys.com>

When dwc2 core is in hibernation mode loading
driver again causes driver fail. Because in
that mode registers are not accessible.

In order to exit from hibernation checking
dwc2 core power saving state in "dwc2_driver_remove()"
function. If core is in hibernation, then checking the
operational mode of the driver. To check whether dwc2 core
is operating in host mode or device mode there is one way
which is retrieving the backup value of "gotgctl" and compare
the "CurMod" value. If previously core entered hibernation
in host mode then the exit is performed for host if not then
exit is performed for device mode. The introduced checking
is because in hibernation state all registers are not
accessible.

Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
---
 drivers/usb/dwc2/platform.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index f8b819cfa80e..8ad33e042a14 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -316,8 +316,23 @@ static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
 static int dwc2_driver_remove(struct platform_device *dev)
 {
 	struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
+	struct dwc2_gregs_backup *gr;
 	int ret = 0;
 
+	gr = &hsotg->gr_backup;
+
+	/* Exit Hibernation when driver is removed. */
+	if (hsotg->hibernated) {
+		if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
+			ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
+		else
+			ret = dwc2_exit_hibernation(hsotg, 0, 0, 0);
+
+		if (ret)
+			dev_err(hsotg->dev,
+				"exit hibernation failed.\n");
+	}
+
 	/* Exit Partial Power Down when driver is removed. */
 	if (hsotg->in_ppd) {
 		ret = dwc2_exit_partial_power_down(hsotg, 0, true);
-- 
2.25.1


  parent reply	other threads:[~2021-04-16 12:48 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <cover.1618464534.git.Arthur.Petrosyan@synopsys.com>
2021-04-15  5:39 ` [PATCH 01/15] usb: dwc2: Update exit hibernation when port reset is asserted Artur Petrosyan
2021-04-15  5:39 ` [PATCH 02/15] usb: dwc2: Reset DEVADDR after exiting gadget hibernation Artur Petrosyan
2021-04-15  5:39 ` [PATCH 03/15] usb: dwc2: Fix host mode hibernation exit with remote wakeup flow Artur Petrosyan
2021-04-15  5:39 ` [PATCH 04/15] usb: dwc2: Fix hibernation between host and device modes Artur Petrosyan
2021-04-15  5:40 ` [PATCH 05/15] usb: dwc2: Allow exiting hibernation from gpwrdn rst detect Artur Petrosyan
2021-04-15  5:40 ` [PATCH 06/15] usb: dwc2: Clear fifo_map when resetting core Artur Petrosyan
2021-04-15  5:40 ` [PATCH 07/15] usb: dwc2: Clear GINTSTS_RESTOREDONE bit after restore is generated Artur Petrosyan
2021-04-15  5:40 ` [PATCH 08/15] usb: dwc2: Move enter hibernation to dwc2_port_suspend() function Artur Petrosyan
2021-04-15  5:40 ` [PATCH 09/15] usb: dwc2: Move exit hibernation to dwc2_port_resume() function Artur Petrosyan
2021-04-15  5:40 ` [PATCH 10/15] usb: dwc2: Allow exit hibernation in urb enqueue Artur Petrosyan
2021-04-15  9:12   ` Sergei Shtylyov
2021-04-16  5:43     ` Artur Petrosyan
2021-04-16  7:05       ` Artur Petrosyan
2021-04-15  5:40 ` [PATCH 11/15] usb: dwc2: Add hibernation entering flow by system suspend Artur Petrosyan
2021-04-15  5:40 ` [PATCH 12/15] usb: dwc2: Add hibernation exiting flow by system resume Artur Petrosyan
2021-04-15  5:41 ` [PATCH 13/15] usb: dwc2: Add exit hibernation mode before removing drive Artur Petrosyan
2021-04-15  9:24   ` Sergei Shtylyov
2021-04-16  5:46     ` Artur Petrosyan
2021-04-15  9:50   ` kernel test robot
2021-04-15 13:40   ` [kbuild] " Dan Carpenter
2021-04-15  5:41 ` [PATCH 14/15] usb: dwc2: Update dwc2_handle_usb_suspend_intr function Artur Petrosyan
2021-04-15  5:41 ` [PATCH 15/15] usb: dwc2: Get rid of useless error checks in suspend interrupt Artur Petrosyan
2021-04-16 12:46 ` [PATCH v2 00/15] usb: dwc2: Fix Hibernation issues Artur Petrosyan
2021-04-16 12:46 ` [PATCH v2 01/15] usb: dwc2: Update exit hibernation when port reset is asserted Artur Petrosyan
2021-04-19  7:30   ` Minas Harutyunyan
2021-04-16 12:46 ` [PATCH v2 02/15] usb: dwc2: Reset DEVADDR after exiting gadget hibernation Artur Petrosyan
2021-04-16 12:47 ` [PATCH v2 03/15] usb: dwc2: Fix host mode hibernation exit with remote wakeup flow Artur Petrosyan
2021-04-19  7:30   ` Minas Harutyunyan
2021-04-16 12:47 ` [PATCH v2 04/15] usb: dwc2: Fix hibernation between host and device modes Artur Petrosyan
2021-04-16 12:47 ` [PATCH v2 05/15] usb: dwc2: Allow exiting hibernation from gpwrdn rst detect Artur Petrosyan
2021-04-16 12:47 ` [PATCH v2 06/15] usb: dwc2: Clear fifo_map when resetting core Artur Petrosyan
2021-04-16 12:47 ` [PATCH v2 07/15] usb: dwc2: Clear GINTSTS_RESTOREDONE bit after restore is generated Artur Petrosyan
2021-04-16 12:47 ` [PATCH v2 08/15] usb: dwc2: Move enter hibernation to dwc2_port_suspend() function Artur Petrosyan
2021-04-19  7:31   ` Minas Harutyunyan
2021-04-16 12:47 ` [PATCH v2 09/15] usb: dwc2: Move exit hibernation to dwc2_port_resume() function Artur Petrosyan
2021-04-19  7:31   ` Minas Harutyunyan
2021-04-16 12:48 ` [PATCH v2 10/15] usb: dwc2: Allow exit hibernation in urb enqueue Artur Petrosyan
2021-04-19  7:31   ` Minas Harutyunyan
2021-04-16 12:48 ` [PATCH v2 11/15] usb: dwc2: Add hibernation entering flow by system suspend Artur Petrosyan
2021-04-19  7:31   ` Minas Harutyunyan
2021-04-16 12:48 ` [PATCH v2 12/15] usb: dwc2: Add hibernation exiting flow by system resume Artur Petrosyan
2021-04-19  7:31   ` Minas Harutyunyan
2021-04-16 12:48 ` Artur Petrosyan [this message]
2021-04-19  7:32   ` [PATCH v2 13/15] usb: dwc2: Add exit hibernation mode before removing drive Minas Harutyunyan
2021-04-16 12:48 ` [PATCH v2 14/15] usb: dwc2: Update dwc2_handle_usb_suspend_intr function Artur Petrosyan
2021-04-16 12:48 ` [PATCH v2 15/15] usb: dwc2: Get rid of useless error checks in suspend interrupt Artur Petrosyan
2021-04-19  7:32   ` Minas Harutyunyan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210416124827.9BB59A005D@mailhost.synopsys.com \
    --to=arthur.petrosyan@synopsys.com \
    --cc=John.Youn@synopsys.com \
    --cc=Minas.Harutyunyan@synopsys.com \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).