From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
chris.packham@alliedtelesis.co.nz
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v2 1/2] powerpc/64: Fix the definition of the fixmap area
Date: Tue, 20 Apr 2021 13:32:48 +0000 (UTC) [thread overview]
Message-ID: <0d51620eacf036d683d1a3c41328f69adb601dc0.1618925560.git.christophe.leroy@csgroup.eu> (raw)
At the time being, the fixmap area is defined at the top of
the address space or just below KASAN.
This definition is not valid for PPC64.
For PPC64, use the top of the I/O space.
Because of circular dependencies, it is not possible to include
asm/fixmap.h in asm/book3s/64/pgtable.h , so define a fixed size
AREA at the top of the I/O space for fixmap and ensure during
build that the size is big enough.
Fixes: 265c3491c4bc ("powerpc: Add support for GENERIC_EARLY_IOREMAP")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
arch/powerpc/include/asm/book3s/64/pgtable.h | 4 +++-
arch/powerpc/include/asm/fixmap.h | 9 +++++++++
arch/powerpc/include/asm/nohash/64/pgtable.h | 5 ++++-
3 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index 0c89977ec10b..a666d561b44d 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -7,6 +7,7 @@
#ifndef __ASSEMBLY__
#include <linux/mmdebug.h>
#include <linux/bug.h>
+#include <linux/sizes.h>
#endif
/*
@@ -324,7 +325,8 @@ extern unsigned long pci_io_base;
#define PHB_IO_END (KERN_IO_START + FULL_IO_SIZE)
#define IOREMAP_BASE (PHB_IO_END)
#define IOREMAP_START (ioremap_bot)
-#define IOREMAP_END (KERN_IO_END)
+#define IOREMAP_END (KERN_IO_END - FIXADDR_SIZE)
+#define FIXADDR_SIZE SZ_32M
/* Advertise special mapping type for AGP */
#define HAVE_PAGE_AGP
diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h
index 8d03c16a3663..947b5b9c4424 100644
--- a/arch/powerpc/include/asm/fixmap.h
+++ b/arch/powerpc/include/asm/fixmap.h
@@ -23,12 +23,17 @@
#include <asm/kmap_size.h>
#endif
+#ifdef CONFIG_PPC64
+#define FIXADDR_TOP (IOREMAP_END + FIXADDR_SIZE)
+#else
+#define FIXADDR_SIZE 0
#ifdef CONFIG_KASAN
#include <asm/kasan.h>
#define FIXADDR_TOP (KASAN_SHADOW_START - PAGE_SIZE)
#else
#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE))
#endif
+#endif
/*
* Here we define all the compile-time 'special' virtual
@@ -50,6 +55,7 @@
*/
enum fixed_addresses {
FIX_HOLE,
+#ifdef CONFIG_PPC32
/* reserve the top 128K for early debugging purposes */
FIX_EARLY_DEBUG_TOP = FIX_HOLE,
FIX_EARLY_DEBUG_BASE = FIX_EARLY_DEBUG_TOP+(ALIGN(SZ_128K, PAGE_SIZE)/PAGE_SIZE)-1,
@@ -72,6 +78,7 @@ enum fixed_addresses {
FIX_IMMR_SIZE,
#endif
/* FIX_PCIE_MCFG, */
+#endif /* CONFIG_PPC32 */
__end_of_permanent_fixed_addresses,
#define NR_FIX_BTMAPS (SZ_256K / PAGE_SIZE)
@@ -98,6 +105,8 @@ enum fixed_addresses {
static inline void __set_fixmap(enum fixed_addresses idx,
phys_addr_t phys, pgprot_t flags)
{
+ BUILD_BUG_ON(IS_ENABLED(CONFIG_PPC64) && __FIXADDR_SIZE > FIXADDR_SIZE);
+
if (__builtin_constant_p(idx))
BUILD_BUG_ON(idx >= __end_of_fixed_addresses);
else if (WARN_ON(idx >= __end_of_fixed_addresses))
diff --git a/arch/powerpc/include/asm/nohash/64/pgtable.h b/arch/powerpc/include/asm/nohash/64/pgtable.h
index 6cb8aa357191..57cd3892bfe0 100644
--- a/arch/powerpc/include/asm/nohash/64/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/64/pgtable.h
@@ -6,6 +6,8 @@
* the ppc64 non-hashed page table.
*/
+#include <linux/sizes.h>
+
#include <asm/nohash/64/pgtable-4k.h>
#include <asm/barrier.h>
#include <asm/asm-const.h>
@@ -54,7 +56,8 @@
#define PHB_IO_END (KERN_IO_START + FULL_IO_SIZE)
#define IOREMAP_BASE (PHB_IO_END)
#define IOREMAP_START (ioremap_bot)
-#define IOREMAP_END (KERN_VIRT_START + KERN_VIRT_SIZE)
+#define IOREMAP_END (KERN_VIRT_START + KERN_VIRT_SIZE - FIXADDR_SIZE)
+#define FIXADDR_SIZE SZ_32M
/*
--
2.25.0
next reply other threads:[~2021-04-20 13:32 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-20 13:32 Christophe Leroy [this message]
2021-04-20 13:32 ` [PATCH v2 2/2] powerpc/legacy_serial: Use early_ioremap() Christophe Leroy
2021-04-20 13:39 ` Christophe Leroy
2021-04-20 21:15 ` Chris Packham
2021-05-19 14:57 ` Alexey Kardashevskiy
2021-04-29 14:01 ` [PATCH v2 1/2] powerpc/64: Fix the definition of the fixmap area Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0d51620eacf036d683d1a3c41328f69adb601dc0.1618925560.git.christophe.leroy@csgroup.eu \
--to=christophe.leroy@csgroup.eu \
--cc=benh@kernel.crashing.org \
--cc=chris.packham@alliedtelesis.co.nz \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).