[v2,2/2] powerpc/legacy_serial: Use early_ioremap()
diff mbox series

Message ID 103ed8ee9e5973c958ec1da2d0b0764f69395d01.1618925560.git.christophe.leroy@csgroup.eu
State Accepted
Commit 0bd3f9e953bd3636e73d296e9bed11a25c09c118
Headers show
Series
  • [v2,1/2] powerpc/64: Fix the definition of the fixmap area
Related show

Commit Message

Christophe Leroy April 20, 2021, 1:32 p.m. UTC
From: Christophe Leroy <christophe.leroy@c-s.fr>

[    0.000000] ioremap() called early from find_legacy_serial_ports+0x3cc/0x474. Use early_ioremap() instead

find_legacy_serial_ports() is called early from setup_arch(), before
paging_init(). vmalloc is not available yet, ioremap shouldn't be
used that early.

Use early_ioremap() and switch to a regular ioremap() later.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 arch/powerpc/kernel/legacy_serial.c | 33 +++++++++++++++++++++++++----
 1 file changed, 29 insertions(+), 4 deletions(-)

Comments

Christophe Leroy April 20, 2021, 1:39 p.m. UTC | #1
Le 20/04/2021 à 15:32, Christophe Leroy a écrit :
> From: Christophe Leroy <christophe.leroy@c-s.fr>

Oops, I forgot to reset the Author. Michael if you apply this patch please update the author and 
remove the old Signed-off-by

Thanks

> 
> [    0.000000] ioremap() called early from find_legacy_serial_ports+0x3cc/0x474. Use early_ioremap() instead
> 
> find_legacy_serial_ports() is called early from setup_arch(), before
> paging_init(). vmalloc is not available yet, ioremap shouldn't be
> used that early.
> 
> Use early_ioremap() and switch to a regular ioremap() later.
> 
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> ---
>   arch/powerpc/kernel/legacy_serial.c | 33 +++++++++++++++++++++++++----
>   1 file changed, 29 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
> index f061e06e9f51..8b2c1a8553a0 100644
> --- a/arch/powerpc/kernel/legacy_serial.c
> +++ b/arch/powerpc/kernel/legacy_serial.c
> @@ -15,6 +15,7 @@
>   #include <asm/udbg.h>
>   #include <asm/pci-bridge.h>
>   #include <asm/ppc-pci.h>
> +#include <asm/early_ioremap.h>
>   
>   #undef DEBUG
>   
> @@ -34,6 +35,7 @@ static struct legacy_serial_info {
>   	unsigned int			clock;
>   	int				irq_check_parent;
>   	phys_addr_t			taddr;
> +	void __iomem			*early_addr;
>   } legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
>   
>   static const struct of_device_id legacy_serial_parents[] __initconst = {
> @@ -325,17 +327,16 @@ static void __init setup_legacy_serial_console(int console)
>   {
>   	struct legacy_serial_info *info = &legacy_serial_infos[console];
>   	struct plat_serial8250_port *port = &legacy_serial_ports[console];
> -	void __iomem *addr;
>   	unsigned int stride;
>   
>   	stride = 1 << port->regshift;
>   
>   	/* Check if a translated MMIO address has been found */
>   	if (info->taddr) {
> -		addr = ioremap(info->taddr, 0x1000);
> -		if (addr == NULL)
> +		info->early_addr = early_ioremap(info->taddr, 0x1000);
> +		if (info->early_addr == NULL)
>   			return;
> -		udbg_uart_init_mmio(addr, stride);
> +		udbg_uart_init_mmio(info->early_addr, stride);
>   	} else {
>   		/* Check if it's PIO and we support untranslated PIO */
>   		if (port->iotype == UPIO_PORT && isa_io_special)
> @@ -353,6 +354,30 @@ static void __init setup_legacy_serial_console(int console)
>   	udbg_uart_setup(info->speed, info->clock);
>   }
>   
> +static int __init ioremap_legacy_serial_console(void)
> +{
> +	struct legacy_serial_info *info = &legacy_serial_infos[legacy_serial_console];
> +	struct plat_serial8250_port *port = &legacy_serial_ports[legacy_serial_console];
> +	void __iomem *vaddr;
> +
> +	if (legacy_serial_console < 0)
> +		return 0;
> +
> +	if (!info->early_addr)
> +		return 0;
> +
> +	vaddr = ioremap(info->taddr, 0x1000);
> +	if (WARN_ON(!vaddr))
> +		return -ENOMEM;
> +
> +	udbg_uart_init_mmio(vaddr, 1 << port->regshift);
> +	early_iounmap(info->early_addr, 0x1000);
> +	info->early_addr = NULL;
> +
> +	return 0;
> +}
> +early_initcall(ioremap_legacy_serial_console);
> +
>   /*
>    * This is called very early, as part of setup_system() or eventually
>    * setup_arch(), basically before anything else in this file. This function
>
Chris Packham April 20, 2021, 9:15 p.m. UTC | #2
Hi Christophe,

On 21/04/21 1:32 am, Christophe Leroy wrote:
> From: Christophe Leroy <christophe.leroy@c-s.fr>
>
> [    0.000000] ioremap() called early from find_legacy_serial_ports+0x3cc/0x474. Use early_ioremap() instead
>
> find_legacy_serial_ports() is called early from setup_arch(), before
> paging_init(). vmalloc is not available yet, ioremap shouldn't be
> used that early.
>
> Use early_ioremap() and switch to a regular ioremap() later.
>
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> ---

I gave it a spin on my T2080RDB. The error message is gone and I still 
get console output.

Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

>   arch/powerpc/kernel/legacy_serial.c | 33 +++++++++++++++++++++++++----
>   1 file changed, 29 insertions(+), 4 deletions(-)
>
> diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
> index f061e06e9f51..8b2c1a8553a0 100644
> --- a/arch/powerpc/kernel/legacy_serial.c
> +++ b/arch/powerpc/kernel/legacy_serial.c
> @@ -15,6 +15,7 @@
>   #include <asm/udbg.h>
>   #include <asm/pci-bridge.h>
>   #include <asm/ppc-pci.h>
> +#include <asm/early_ioremap.h>
>   
>   #undef DEBUG
>   
> @@ -34,6 +35,7 @@ static struct legacy_serial_info {
>   	unsigned int			clock;
>   	int				irq_check_parent;
>   	phys_addr_t			taddr;
> +	void __iomem			*early_addr;
>   } legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
>   
>   static const struct of_device_id legacy_serial_parents[] __initconst = {
> @@ -325,17 +327,16 @@ static void __init setup_legacy_serial_console(int console)
>   {
>   	struct legacy_serial_info *info = &legacy_serial_infos[console];
>   	struct plat_serial8250_port *port = &legacy_serial_ports[console];
> -	void __iomem *addr;
>   	unsigned int stride;
>   
>   	stride = 1 << port->regshift;
>   
>   	/* Check if a translated MMIO address has been found */
>   	if (info->taddr) {
> -		addr = ioremap(info->taddr, 0x1000);
> -		if (addr == NULL)
> +		info->early_addr = early_ioremap(info->taddr, 0x1000);
> +		if (info->early_addr == NULL)
>   			return;
> -		udbg_uart_init_mmio(addr, stride);
> +		udbg_uart_init_mmio(info->early_addr, stride);
>   	} else {
>   		/* Check if it's PIO and we support untranslated PIO */
>   		if (port->iotype == UPIO_PORT && isa_io_special)
> @@ -353,6 +354,30 @@ static void __init setup_legacy_serial_console(int console)
>   	udbg_uart_setup(info->speed, info->clock);
>   }
>   
> +static int __init ioremap_legacy_serial_console(void)
> +{
> +	struct legacy_serial_info *info = &legacy_serial_infos[legacy_serial_console];
> +	struct plat_serial8250_port *port = &legacy_serial_ports[legacy_serial_console];
> +	void __iomem *vaddr;
> +
> +	if (legacy_serial_console < 0)
> +		return 0;
> +
> +	if (!info->early_addr)
> +		return 0;
> +
> +	vaddr = ioremap(info->taddr, 0x1000);
> +	if (WARN_ON(!vaddr))
> +		return -ENOMEM;
> +
> +	udbg_uart_init_mmio(vaddr, 1 << port->regshift);
> +	early_iounmap(info->early_addr, 0x1000);
> +	info->early_addr = NULL;
> +
> +	return 0;
> +}
> +early_initcall(ioremap_legacy_serial_console);
> +
>   /*
>    * This is called very early, as part of setup_system() or eventually
>    * setup_arch(), basically before anything else in this file. This function

Patch
diff mbox series

diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index f061e06e9f51..8b2c1a8553a0 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -15,6 +15,7 @@ 
 #include <asm/udbg.h>
 #include <asm/pci-bridge.h>
 #include <asm/ppc-pci.h>
+#include <asm/early_ioremap.h>
 
 #undef DEBUG
 
@@ -34,6 +35,7 @@  static struct legacy_serial_info {
 	unsigned int			clock;
 	int				irq_check_parent;
 	phys_addr_t			taddr;
+	void __iomem			*early_addr;
 } legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
 
 static const struct of_device_id legacy_serial_parents[] __initconst = {
@@ -325,17 +327,16 @@  static void __init setup_legacy_serial_console(int console)
 {
 	struct legacy_serial_info *info = &legacy_serial_infos[console];
 	struct plat_serial8250_port *port = &legacy_serial_ports[console];
-	void __iomem *addr;
 	unsigned int stride;
 
 	stride = 1 << port->regshift;
 
 	/* Check if a translated MMIO address has been found */
 	if (info->taddr) {
-		addr = ioremap(info->taddr, 0x1000);
-		if (addr == NULL)
+		info->early_addr = early_ioremap(info->taddr, 0x1000);
+		if (info->early_addr == NULL)
 			return;
-		udbg_uart_init_mmio(addr, stride);
+		udbg_uart_init_mmio(info->early_addr, stride);
 	} else {
 		/* Check if it's PIO and we support untranslated PIO */
 		if (port->iotype == UPIO_PORT && isa_io_special)
@@ -353,6 +354,30 @@  static void __init setup_legacy_serial_console(int console)
 	udbg_uart_setup(info->speed, info->clock);
 }
 
+static int __init ioremap_legacy_serial_console(void)
+{
+	struct legacy_serial_info *info = &legacy_serial_infos[legacy_serial_console];
+	struct plat_serial8250_port *port = &legacy_serial_ports[legacy_serial_console];
+	void __iomem *vaddr;
+
+	if (legacy_serial_console < 0)
+		return 0;
+
+	if (!info->early_addr)
+		return 0;
+
+	vaddr = ioremap(info->taddr, 0x1000);
+	if (WARN_ON(!vaddr))
+		return -ENOMEM;
+
+	udbg_uart_init_mmio(vaddr, 1 << port->regshift);
+	early_iounmap(info->early_addr, 0x1000);
+	info->early_addr = NULL;
+
+	return 0;
+}
+early_initcall(ioremap_legacy_serial_console);
+
 /*
  * This is called very early, as part of setup_system() or eventually
  * setup_arch(), basically before anything else in this file. This function