From: Sean Christopherson <seanjc@google.com>
To: Paolo Bonzini <pbonzini@redhat.com>,
Dave Hansen <dave.hansen@linux.intel.com>,
Andy Lutomirski <luto@kernel.org>,
Peter Zijlstra <peterz@infradead.org>
Cc: Sean Christopherson <seanjc@google.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Borislav Petkov <bp@suse.de>,
Tom Lendacky <thomas.lendacky@amd.com>,
Brijesh Singh <brijesh.singh@amd.com>
Subject: [PATCH v5 13/15] KVM: SVM: Drop redundant svm_sev_enabled() helper
Date: Wed, 21 Apr 2021 19:11:23 -0700 [thread overview]
Message-ID: <20210422021125.3417167-14-seanjc@google.com> (raw)
In-Reply-To: <20210422021125.3417167-1-seanjc@google.com>
Replace calls to svm_sev_enabled() with direct checks on sev_enabled, or
in the case of svm_mem_enc_op, simply drop the call to svm_sev_enabled().
This effectively replaces checks against a valid max_sev_asid with checks
against sev_enabled. sev_enabled is forced off by sev_hardware_setup()
if max_sev_asid is invalid, all call sites are guaranteed to run after
sev_hardware_setup(), and all of the checks care about SEV being fully
enabled (as opposed to intentionally handling the scenario where
max_sev_asid is valid but SEV enabling fails due to OOM).
Reviewed by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/svm/sev.c | 6 +++---
arch/x86/kvm/svm/svm.h | 5 -----
2 files changed, 3 insertions(+), 8 deletions(-)
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index 68999085db6e..4440459cf8e3 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -1457,7 +1457,7 @@ int svm_mem_enc_op(struct kvm *kvm, void __user *argp)
struct kvm_sev_cmd sev_cmd;
int r;
- if (!svm_sev_enabled() || !sev_enabled)
+ if (!sev_enabled)
return -ENOTTY;
if (!argp)
@@ -1844,7 +1844,7 @@ void __init sev_hardware_setup(void)
void sev_hardware_teardown(void)
{
- if (!svm_sev_enabled())
+ if (!sev_enabled)
return;
bitmap_free(sev_asid_bitmap);
@@ -1855,7 +1855,7 @@ void sev_hardware_teardown(void)
int sev_cpu_init(struct svm_cpu_data *sd)
{
- if (!svm_sev_enabled())
+ if (!sev_enabled)
return 0;
sd->sev_vmcbs = kcalloc(max_sev_asid + 1, sizeof(void *), GFP_KERNEL);
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index 0af638f97b5f..f455784519d7 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -568,11 +568,6 @@ void svm_vcpu_unblocking(struct kvm_vcpu *vcpu);
extern unsigned int max_sev_asid;
-static inline bool svm_sev_enabled(void)
-{
- return IS_ENABLED(CONFIG_KVM_AMD_SEV) ? max_sev_asid : 0;
-}
-
void sev_vm_destroy(struct kvm *kvm);
int svm_mem_enc_op(struct kvm *kvm, void __user *argp);
int svm_register_enc_region(struct kvm *kvm,
--
2.31.1.498.g6c1eba8ee3d-goog
next prev parent reply other threads:[~2021-04-22 2:12 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-22 2:11 [PATCH v5 00/15] KVM: SVM: Misc SEV cleanups Sean Christopherson
2021-04-22 2:11 ` [PATCH v5 01/15] KVM: SVM: Zero out the VMCB array used to track SEV ASID association Sean Christopherson
2021-04-22 2:11 ` [PATCH v5 02/15] KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails Sean Christopherson
2021-04-22 19:34 ` Tom Lendacky
2021-04-22 2:11 ` [PATCH v5 03/15] KVM: SVM: Disable SEV/SEV-ES if NPT is disabled Sean Christopherson
2021-04-22 7:14 ` Paolo Bonzini
2021-04-22 16:15 ` Sean Christopherson
2021-04-22 17:08 ` Paolo Bonzini
2021-04-22 18:11 ` Sean Christopherson
2021-04-23 7:08 ` Paolo Bonzini
2021-04-22 2:11 ` [PATCH v5 04/15] KVM: SVM: Move SEV module params/variables to sev.c Sean Christopherson
2021-04-22 2:11 ` [PATCH v5 05/15] KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features Sean Christopherson
2021-04-22 2:11 ` [PATCH v5 06/15] x86/sev: Drop redundant and potentially misleading 'sev_enabled' Sean Christopherson
2021-04-22 12:05 ` Paolo Bonzini
2021-04-22 12:18 ` Borislav Petkov
2021-04-22 12:16 ` Borislav Petkov
2021-04-22 2:11 ` [PATCH v5 07/15] KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables Sean Christopherson
2021-04-22 2:11 ` [PATCH v5 08/15] KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y Sean Christopherson
2021-04-22 2:11 ` [PATCH v5 09/15] KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported) Sean Christopherson
2021-04-22 2:11 ` [PATCH v5 10/15] KVM: SVM: Unconditionally invoke sev_hardware_teardown() Sean Christopherson
2021-04-22 2:11 ` [PATCH v5 11/15] KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup() Sean Christopherson
2021-04-22 2:11 ` [PATCH v5 12/15] KVM: SVM: Move SEV VMCB tracking allocation to sev.c Sean Christopherson
2021-04-22 2:11 ` Sean Christopherson [this message]
2021-04-22 2:11 ` [PATCH v5 14/15] KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids() Sean Christopherson
2021-04-22 2:11 ` [PATCH v5 15/15] KVM: SVM: Skip SEV cache flush if no ASIDs have been used Sean Christopherson
2021-04-22 7:30 ` Paolo Bonzini
2021-04-22 7:30 ` [PATCH v5 00/15] KVM: SVM: Misc SEV cleanups Paolo Bonzini
2021-04-22 16:02 ` Sean Christopherson
2021-04-22 17:08 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210422021125.3417167-14-seanjc@google.com \
--to=seanjc@google.com \
--cc=bp@suse.de \
--cc=brijesh.singh@amd.com \
--cc=dave.hansen@linux.intel.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=pbonzini@redhat.com \
--cc=peterz@infradead.org \
--cc=thomas.lendacky@amd.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).