From: Ulf Hansson <ulf.hansson@linaro.org>
To: linux-mmc@vger.kernel.org, Ulf Hansson <ulf.hansson@linaro.org>,
Adrian Hunter <adrian.hunter@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Shawn Lin <shawn.lin@rock-chips.com>,
Avri Altman <avri.altman@wdc.com>,
Masami Hiramatsu <masami.hiramatsu@linaro.org>,
linux-block@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 10/11] mmc: core: Read performance enhancements registers for SD cards
Date: Tue, 4 May 2021 18:12:21 +0200 [thread overview]
Message-ID: <20210504161222.101536-11-ulf.hansson@linaro.org> (raw)
In-Reply-To: <20210504161222.101536-1-ulf.hansson@linaro.org>
In SD spec v6.x the SD function extension registers for performance
enhancements were introduced. These registers let the SD card announce
supports for various performance related features, like "self-maintenance",
"cache" and "command queuing".
Let's extend the parsing of SD function extension registers and store the
information in the struct mmc_card. This prepares for subsequent changes to
implement the complete support for new the performance enhancement
features.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/mmc/core/sd.c | 53 ++++++++++++++++++++++++++++++++++++++++
include/linux/mmc/card.h | 7 ++++++
2 files changed, 60 insertions(+)
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index cb5e8b2fc32f..702d7c1a0aec 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -1058,6 +1058,55 @@ static int sd_parse_ext_reg_power(struct mmc_card *card, u8 fno, u8 page,
return err;
}
+static int sd_parse_ext_reg_perf(struct mmc_card *card, u8 fno, u8 page,
+ u16 offset)
+{
+ int err;
+ u8 *reg_buf;
+
+ reg_buf = kzalloc(512, GFP_KERNEL);
+ if (!reg_buf)
+ return -ENOMEM;
+
+ err = sd_read_ext_reg(card, fno, page, offset, 512, reg_buf);
+ if (err) {
+ pr_warn("%s: error %d reading PERF func of ext reg\n",
+ mmc_hostname(card->host), err);
+ goto out;
+ }
+
+ /* PERF revision. */
+ card->ext_perf.rev = reg_buf[0];
+
+ /* FX_EVENT support at bit 0. */
+ if (reg_buf[1] & 0x1)
+ card->ext_perf.feature_support |= SD_EXT_PERF_FX_EVENT;
+
+ /* Card initiated self-maintenance support at bit 0. */
+ if (reg_buf[2] & 0x1)
+ card->ext_perf.feature_support |= SD_EXT_PERF_CARD_MAINT;
+
+ /* Host initiated self-maintenance support at bit 1. */
+ if (reg_buf[2] & 0x2)
+ card->ext_perf.feature_support |= SD_EXT_PERF_HOST_MAINT;
+
+ /* Cache support at bit 0. */
+ if (reg_buf[4] & 0x1)
+ card->ext_perf.feature_support |= SD_EXT_PERF_CACHE;
+
+ /* Command queue support indicated via queue depth bits (0 to 4). */
+ if (reg_buf[6] & 0x1f)
+ card->ext_perf.feature_support |= SD_EXT_PERF_CMD_QUEUE;
+
+ card->ext_perf.fno = fno;
+ card->ext_perf.page = page;
+ card->ext_perf.offset = offset;
+
+out:
+ kfree(reg_buf);
+ return err;
+}
+
static int sd_parse_ext_reg(struct mmc_card *card, u8 *gen_info_buf,
u16 *next_ext_addr)
{
@@ -1102,6 +1151,10 @@ static int sd_parse_ext_reg(struct mmc_card *card, u8 *gen_info_buf,
if (sfc == 0x1)
return sd_parse_ext_reg_power(card, fno, page, offset);
+ /* Standard Function Code for performance enhancement. */
+ if (sfc == 0x2)
+ return sd_parse_ext_reg_perf(card, fno, page, offset);
+
return 0;
}
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 03a862e93594..2867af0635f8 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -201,6 +201,12 @@ struct sd_ext_reg {
#define SD_EXT_POWER_OFF_NOTIFY (1<<0)
#define SD_EXT_POWER_SUSTENANCE (1<<1)
#define SD_EXT_POWER_DOWN_MODE (1<<2)
+/* Performance Enhancement Function. */
+#define SD_EXT_PERF_FX_EVENT (1<<0)
+#define SD_EXT_PERF_CARD_MAINT (1<<1)
+#define SD_EXT_PERF_HOST_MAINT (1<<2)
+#define SD_EXT_PERF_CACHE (1<<3)
+#define SD_EXT_PERF_CMD_QUEUE (1<<4)
};
struct sdio_cccr {
@@ -305,6 +311,7 @@ struct mmc_card {
struct sd_ssr ssr; /* yet more SD information */
struct sd_switch_caps sw_caps; /* switch (CMD6) caps */
struct sd_ext_reg ext_power; /* SD extension reg for PM */
+ struct sd_ext_reg ext_perf; /* SD extension reg for PERF */
unsigned int sdio_funcs; /* number of SDIO functions */
atomic_t sdio_funcs_probed; /* number of probed SDIO funcs */
--
2.25.1
next prev parent reply other threads:[~2021-05-04 16:13 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-04 16:12 [PATCH 00/11] Initital support for new power/perf features for SD cards Ulf Hansson
2021-05-04 16:12 ` [PATCH 01/11] mmc: core: Drop open coding when preparing commands with busy signaling Ulf Hansson
2021-05-06 12:50 ` Linus Walleij
2021-05-07 1:42 ` Shawn Lin
2021-05-04 16:12 ` [PATCH 02/11] mmc: core: Take into account MMC_CAP_NEED_RSP_BUSY for eMMC HPI commands Ulf Hansson
2021-05-06 12:51 ` Linus Walleij
2021-05-07 1:44 ` Shawn Lin
2021-05-04 16:12 ` [PATCH 03/11] mmc: core: Re-structure some code in __mmc_poll_for_busy() Ulf Hansson
2021-05-06 12:52 ` Linus Walleij
2021-05-07 1:48 ` Shawn Lin
2021-05-04 16:12 ` [PATCH 04/11] mmc: core: Extend re-use of __mmc_poll_for_busy() Ulf Hansson
2021-05-06 12:53 ` Linus Walleij
2021-05-07 1:51 ` Shawn Lin
2021-05-04 16:12 ` [PATCH 05/11] mmc: core: Enable eMMC sleep commands to use HW busy polling Ulf Hansson
2021-05-06 12:55 ` Linus Walleij
2021-05-07 1:52 ` Shawn Lin
2021-05-04 16:12 ` [PATCH 06/11] mmc: core: Prepare mmc_send_cxd_data() to be re-used for additional cmds Ulf Hansson
2021-05-06 12:56 ` Linus Walleij
2021-05-06 13:00 ` Linus Walleij
2021-05-07 7:30 ` Ulf Hansson
2021-05-07 1:53 ` Shawn Lin
2021-05-04 16:12 ` [PATCH 07/11] mmc: core: Drop open coding in mmc_sd_switch() Ulf Hansson
2021-05-06 12:57 ` Linus Walleij
2021-05-07 1:54 ` Shawn Lin
2021-05-04 16:12 ` [PATCH 08/11] mmc: core: Parse the SD SCR register for support of CMD48/49 and CMD58/59 Ulf Hansson
2021-05-06 13:01 ` Linus Walleij
2021-05-07 1:58 ` Shawn Lin
2021-05-04 16:12 ` [PATCH 09/11] mmc: core: Read the SD function extension registers for power management Ulf Hansson
2021-05-06 13:04 ` Linus Walleij
2021-05-07 2:06 ` Shawn Lin
2021-05-07 7:27 ` Ulf Hansson
2021-05-07 7:48 ` Shawn Lin
2021-05-07 11:36 ` Ulf Hansson
2021-05-04 16:12 ` Ulf Hansson [this message]
2021-05-06 13:05 ` [PATCH 10/11] mmc: core: Read performance enhancements registers for SD cards Linus Walleij
2021-05-04 16:12 ` [PATCH 11/11] mmc: core: Add support for Power Off Notification " Ulf Hansson
2021-05-06 13:07 ` Linus Walleij
2021-05-07 6:44 ` [PATCH 00/11] Initital support for new power/perf features " Avri Altman
2021-05-07 7:31 ` Ulf Hansson
2021-05-11 10:56 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210504161222.101536-11-ulf.hansson@linaro.org \
--to=ulf.hansson@linaro.org \
--cc=adrian.hunter@intel.com \
--cc=avri.altman@wdc.com \
--cc=linus.walleij@linaro.org \
--cc=linux-block@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=masami.hiramatsu@linaro.org \
--cc=shawn.lin@rock-chips.com \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).