From: Sean Christopherson <seanjc@google.com>
To: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Xiaoyao Li <xiaoyao.li@intel.com>,
Reiji Watanabe <reijiw@google.com>
Subject: [PATCH 03/15] KVM: SVM: Inject #UD on RDTSCP when it should be disabled in the guest
Date: Tue, 4 May 2021 10:17:22 -0700 [thread overview]
Message-ID: <20210504171734.1434054-4-seanjc@google.com> (raw)
In-Reply-To: <20210504171734.1434054-1-seanjc@google.com>
Intercept RDTSCP to inject #UD if RDTSC is disabled in the guest.
Note, SVM does not support intercepting RDPID. Unlike VMX's
ENABLE_RDTSCP control, RDTSCP interception does not apply to RDPID. This
is a benign virtualization hole as the host kernel (incorrectly) sets
MSR_TSC_AUX if RDTSCP is supported, and KVM loads the guest's MSR_TSC_AUX
into hardware if RDTSCP is supported in the host, i.e. KVM will not leak
the host's MSR_TSC_AUX to the guest.
But, when the kernel bug is fixed, KVM will start leaking the host's
MSR_TSC_AUX if RDPID is supported in hardware, but RDTSCP isn't available
for whatever reason. This leak will be remedied in a future commit.
Fixes: 46896c73c1a4 ("KVM: svm: add support for RDTSCP")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/kvm/svm/svm.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index a7271f31df47..8f2b184270c0 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -1100,7 +1100,9 @@ static u64 svm_write_l1_tsc_offset(struct kvm_vcpu *vcpu, u64 offset)
return svm->vmcb->control.tsc_offset;
}
-static void svm_check_invpcid(struct vcpu_svm *svm)
+/* Evaluate instruction intercepts that depend on guest CPUID features. */
+static void svm_recalc_instruction_intercepts(struct kvm_vcpu *vcpu,
+ struct vcpu_svm *svm)
{
/*
* Intercept INVPCID if shadow paging is enabled to sync/free shadow
@@ -1113,6 +1115,13 @@ static void svm_check_invpcid(struct vcpu_svm *svm)
else
svm_clr_intercept(svm, INTERCEPT_INVPCID);
}
+
+ if (kvm_cpu_cap_has(X86_FEATURE_RDTSCP)) {
+ if (guest_cpuid_has(vcpu, X86_FEATURE_RDTSCP))
+ svm_clr_intercept(svm, INTERCEPT_RDTSCP);
+ else
+ svm_set_intercept(svm, INTERCEPT_RDTSCP);
+ }
}
static void init_vmcb(struct kvm_vcpu *vcpu)
@@ -1248,7 +1257,7 @@ static void init_vmcb(struct kvm_vcpu *vcpu)
svm_clr_intercept(svm, INTERCEPT_PAUSE);
}
- svm_check_invpcid(svm);
+ svm_recalc_instruction_intercepts(vcpu, svm);
/*
* If the host supports V_SPEC_CTRL then disable the interception
@@ -3084,6 +3093,7 @@ static int (*const svm_exit_handlers[])(struct kvm_vcpu *vcpu) = {
[SVM_EXIT_STGI] = stgi_interception,
[SVM_EXIT_CLGI] = clgi_interception,
[SVM_EXIT_SKINIT] = skinit_interception,
+ [SVM_EXIT_RDTSCP] = kvm_handle_invalid_op,
[SVM_EXIT_WBINVD] = kvm_emulate_wbinvd,
[SVM_EXIT_MONITOR] = kvm_emulate_monitor,
[SVM_EXIT_MWAIT] = kvm_emulate_mwait,
@@ -4007,8 +4017,7 @@ static void svm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu)
svm->nrips_enabled = kvm_cpu_cap_has(X86_FEATURE_NRIPS) &&
guest_cpuid_has(vcpu, X86_FEATURE_NRIPS);
- /* Check again if INVPCID interception if required */
- svm_check_invpcid(svm);
+ svm_recalc_instruction_intercepts(vcpu, svm);
/* For sev guests, the memory encryption bit is not reserved in CR3. */
if (sev_guest(vcpu->kvm)) {
--
2.31.1.527.g47e6f16901-goog
next prev parent reply other threads:[~2021-05-04 17:18 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-04 17:17 [PATCH 00/15] KVM: x86: RDPID/RDTSCP fixes and uret MSR cleanups Sean Christopherson
2021-05-04 17:17 ` [PATCH 01/15] KVM: VMX: Do not adverise RDPID if ENABLE_RDTSCP control is unsupported Sean Christopherson
2021-05-04 17:37 ` Jim Mattson
2021-05-04 17:53 ` Jim Mattson
2021-05-04 18:14 ` Sean Christopherson
2021-05-05 3:04 ` Reiji Watanabe
2021-05-10 8:03 ` Maxim Levitsky
2021-05-04 17:17 ` [PATCH 02/15] KVM: x86: Emulate RDPID only if RDTSCP is supported Sean Christopherson
2021-05-04 17:50 ` Jim Mattson
2021-05-05 3:51 ` Reiji Watanabe
2021-05-05 8:01 ` Paolo Bonzini
2021-05-10 8:08 ` Maxim Levitsky
2021-05-10 17:20 ` Sean Christopherson
2021-05-11 12:32 ` Maxim Levitsky
2021-05-04 17:17 ` Sean Christopherson [this message]
2021-05-04 21:45 ` [PATCH 03/15] KVM: SVM: Inject #UD on RDTSCP when it should be disabled in the guest Jim Mattson
2021-05-04 21:53 ` Sean Christopherson
2021-05-04 21:56 ` Jim Mattson
2021-05-04 22:10 ` Sean Christopherson
2021-05-04 22:24 ` Jim Mattson
2021-05-04 21:57 ` Paolo Bonzini
2021-05-04 21:58 ` Jim Mattson
2021-05-10 8:08 ` Maxim Levitsky
2021-05-10 16:56 ` Sean Christopherson
2021-05-11 12:34 ` Maxim Levitsky
2021-05-18 10:59 ` Paolo Bonzini
2021-05-18 19:24 ` Sean Christopherson
2021-05-05 4:26 ` Reiji Watanabe
2021-05-10 8:08 ` Maxim Levitsky
2021-05-04 17:17 ` [PATCH 04/15] KVM: x86: Move RDPID emulation intercept to its own enum Sean Christopherson
2021-05-04 23:24 ` Jim Mattson
2021-05-10 8:14 ` Maxim Levitsky
2021-05-04 17:17 ` [PATCH 05/15] KVM: VMX: Disable preemption when probing user return MSRs Sean Christopherson
2021-05-04 23:36 ` Jim Mattson
2021-05-10 8:18 ` Maxim Levitsky
2021-05-04 17:17 ` [PATCH 06/15] KVM: SVM: Probe and load MSR_TSC_AUX regardless of RDTSCP support in host Sean Christopherson
2021-05-10 8:20 ` Maxim Levitsky
2021-05-04 17:17 ` [PATCH 07/15] KVM: x86: Add support for RDPID without RDTSCP Sean Christopherson
2021-05-10 8:20 ` Maxim Levitsky
2021-05-04 17:17 ` [PATCH 08/15] KVM: VMX: Configure list of user return MSRs at module init Sean Christopherson
2021-05-10 8:23 ` Maxim Levitsky
2021-05-10 15:13 ` Sean Christopherson
2021-05-11 12:34 ` Maxim Levitsky
2021-05-11 20:10 ` Sean Christopherson
2021-05-04 17:17 ` [PATCH 09/15] KVM: VMX: Use flag to indicate "active" uret MSRs instead of sorting list Sean Christopherson
2021-05-08 3:31 ` Reiji Watanabe
2021-05-10 16:43 ` Sean Christopherson
2021-05-10 17:55 ` Reiji Watanabe
2021-05-10 8:25 ` Maxim Levitsky
2021-05-04 17:17 ` [PATCH 10/15] KVM: VMX: Use common x86's uret MSR list as the one true list Sean Christopherson
2021-05-10 8:25 ` Maxim Levitsky
2021-05-04 17:17 ` [PATCH 11/15] KVM: VMX: Disable loading of TSX_CTRL MSR the more conventional way Sean Christopherson
2021-05-05 8:49 ` Paolo Bonzini
2021-05-05 15:36 ` Sean Christopherson
2021-05-05 15:50 ` Paolo Bonzini
2021-05-10 8:26 ` Maxim Levitsky
2021-05-04 17:17 ` [PATCH 12/15] KVM: x86: Export the number of uret MSRs to vendor modules Sean Christopherson
2021-05-10 8:27 ` Maxim Levitsky
2021-05-04 17:17 ` [PATCH 13/15] KVM: x86: Move uret MSR slot management to common x86 Sean Christopherson
2021-05-10 8:28 ` Maxim Levitsky
2021-05-04 17:17 ` [PATCH 14/15] KVM: x86: Tie Intel and AMD behavior for MSR_TSC_AUX to guest CPU model Sean Christopherson
2021-05-10 8:29 ` Maxim Levitsky
2021-05-10 16:50 ` Sean Christopherson
2021-05-10 17:11 ` Jim Mattson
2021-05-11 12:34 ` Maxim Levitsky
2021-05-04 17:17 ` [PATCH 15/15] KVM: x86: Hide RDTSCP and RDPID if MSR_TSC_AUX probing failed Sean Christopherson
2021-05-10 8:29 ` Maxim Levitsky
2021-05-05 8:51 ` [PATCH 00/15] KVM: x86: RDPID/RDTSCP fixes and uret MSR cleanups Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210504171734.1434054-4-seanjc@google.com \
--to=seanjc@google.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=reijiw@google.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
--cc=xiaoyao.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).