From: Jiri Slaby <jslaby@suse.cz>
To: gregkh@linuxfoundation.org
Cc: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
Jiri Slaby <jslaby@suse.cz>
Subject: [PATCH 06/35] n_tty: move lnext handling
Date: Wed, 5 May 2021 11:18:59 +0200 [thread overview]
Message-ID: <20210505091928.22010-7-jslaby@suse.cz> (raw)
In-Reply-To: <20210505091928.22010-1-jslaby@suse.cz>
Move lnext handling from __receive_buf to n_tty_receive_buf_standard. It
simplifies the handling as it needs not fetching 'flag' and decrement
'count' in __receive_buf. Instead, all this is left up to the loop in
n_tty_receive_buf_standard which already does that.
This way, no need to repeat the action when n_tty_receive_char_special
returns true -- ldata->lnext is set there in that case, so the 'if
(ldata->lnext)' check is sufficient. The next patch will switch
n_tty_receive_char_special to return 'void'.
The result is much simplified code flow.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
---
drivers/tty/n_tty.c | 23 ++++++++---------------
1 file changed, 8 insertions(+), 15 deletions(-)
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index f0db3f41df83..d40844b7a4fb 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1538,6 +1538,12 @@ static void n_tty_receive_buf_standard(struct tty_struct *tty,
while (count--) {
if (fp)
flag = *fp++;
+
+ if (ldata->lnext) {
+ n_tty_receive_char_lnext(tty, *cp++, flag);
+ continue;
+ }
+
if (likely(flag == TTY_NORMAL)) {
unsigned char c = *cp++;
@@ -1551,12 +1557,8 @@ static void n_tty_receive_buf_standard(struct tty_struct *tty,
}
if (!test_bit(c, ldata->char_map))
n_tty_receive_char(tty, c);
- else if (n_tty_receive_char_special(tty, c) && count) {
- if (fp)
- flag = *fp++;
- n_tty_receive_char_lnext(tty, *cp++, flag);
- count--;
- }
+ else
+ n_tty_receive_char_special(tty, c);
} else
n_tty_receive_char_flagged(tty, *cp++, flag);
}
@@ -1575,15 +1577,6 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp,
else if (tty->closing && !L_EXTPROC(tty))
n_tty_receive_buf_closing(tty, cp, fp, count);
else {
- if (ldata->lnext) {
- char flag = TTY_NORMAL;
-
- if (fp)
- flag = *fp++;
- n_tty_receive_char_lnext(tty, *cp++, flag);
- count--;
- }
-
n_tty_receive_buf_standard(tty, cp, fp, count);
flush_echoes(tty);
--
2.31.1
next prev parent reply other threads:[~2021-05-05 9:19 UTC|newest]
Thread overview: 71+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-05 9:18 [PATCH 00/35] tty cleanup for 5.14 Jiri Slaby
2021-05-05 9:18 ` [PATCH 01/35] tty: remove broken r3964 line discipline Jiri Slaby
2021-05-05 9:26 ` Greg KH
2021-05-05 9:18 ` [PATCH 02/35] n_tty: remove n_tty_receive_char wrapper Jiri Slaby
2021-05-05 9:18 ` [PATCH 03/35] n_tty: remove n_tty_receive_char_fast Jiri Slaby
2021-05-05 9:18 ` [PATCH 04/35] n_tty: drop n_tty_receive_buf_fast Jiri Slaby
2021-05-05 9:18 ` [PATCH 05/35] n_tty: drop parmrk_dbl from n_tty_receive_char Jiri Slaby
2021-05-05 9:18 ` Jiri Slaby [this message]
2021-05-05 9:19 ` [PATCH 07/35] n_tty: make n_tty_receive_char_special return void Jiri Slaby
2021-05-05 9:19 ` [PATCH 08/35] n_tty: do only one cp dereference in n_tty_receive_buf_standard Jiri Slaby
2021-05-05 9:19 ` [PATCH 09/35] n_tty: invert TTY_NORMAL condition " Jiri Slaby
2021-05-05 9:19 ` [PATCH 10/35] n_tty: remove superfluous return from n_tty_receive_signal_char Jiri Slaby
2021-05-05 9:19 ` [PATCH 11/35] tty: make fp of tty_ldisc_ops::receive_buf{,2} const Jiri Slaby
2021-05-05 9:19 ` [PATCH 12/35] tty: cumulate and document tty_struct::flow* members Jiri Slaby
2021-05-05 9:19 ` [PATCH 13/35] tty: cumulate and document tty_struct::ctrl* members Jiri Slaby
2021-05-05 9:19 ` [PATCH 14/35] tty: set tty_ldisc_ops::num statically Jiri Slaby
2021-05-05 9:19 ` [PATCH 15/35] n_gsm: use goto-failpaths in gsm_init Jiri Slaby
2021-05-05 9:19 ` [PATCH 16/35] tty: make tty_ldisc_ops a param in tty_unregister_ldisc Jiri Slaby
2021-05-05 9:19 ` [PATCH 17/35] tty: drop tty_ldisc_ops::refcount Jiri Slaby
2021-05-05 9:19 ` [PATCH 18/35] tty: no checking of tty_unregister_ldisc Jiri Slaby
2021-05-05 9:19 ` [PATCH 19/35] tty: return void from tty_unregister_ldisc Jiri Slaby
2021-05-05 9:19 ` [PATCH 20/35] ti-st: use goto-failpath in st_core_init Jiri Slaby
2021-05-05 9:19 ` [PATCH 21/35] ti-st: use tty_write_room Jiri Slaby
2021-05-05 9:19 ` [PATCH 22/35] tty: make tty_operations::write_room return uint Jiri Slaby
2021-05-05 9:25 ` Geert Uytterhoeven
2021-05-05 10:34 ` Anton Ivanov
2021-05-05 10:43 ` David Sterba
2021-05-05 11:53 ` Max Filippov
2021-05-05 12:15 ` Alex Elder
2021-05-10 11:27 ` Laurentiu Tudor
2021-05-05 9:19 ` [PATCH 23/35] USB: serial: make usb_serial_driver::write_room " Jiri Slaby
2021-05-19 9:07 ` Johan Hovold
2021-05-05 9:19 ` [PATCH 24/35] tty: make tty_buffer_space_avail " Jiri Slaby
2021-05-05 9:19 ` [PATCH 25/35] tty: remove tty_operations::chars_in_buffer for non-buffering Jiri Slaby
2021-05-05 11:51 ` Max Filippov
2021-05-06 5:47 ` Jiri Slaby
2021-05-06 5:56 ` Greg KH
2021-05-05 9:19 ` [PATCH 26/35] tty: make tty_operations::chars_in_buffer return uint Jiri Slaby
2021-05-05 10:34 ` Anton Ivanov
2021-05-05 10:43 ` David Sterba
2021-05-05 9:19 ` [PATCH 27/35] serial: make usb_serial_driver::chars_in_buffer " Jiri Slaby
2021-05-19 9:09 ` Johan Hovold
2021-05-05 9:19 ` [PATCH 28/35] nozomi: simplify ntty_chars_in_buffer Jiri Slaby
2021-05-05 9:19 ` [PATCH 29/35] USB: serial: digi_acceleport, simplify digi_chars_in_buffer Jiri Slaby
2021-05-19 9:11 ` Johan Hovold
2021-05-05 9:19 ` [PATCH 30/35] tty: remove empty tty_operations::flush_buffer Jiri Slaby
2021-05-05 9:19 ` [PATCH 31/35] tty: remove empty tty_operations::set_termios Jiri Slaby
2021-05-05 10:34 ` Anton Ivanov
2021-05-05 9:19 ` [PATCH 32/35] isdn: capi, remove optional tty ops Jiri Slaby
2021-05-05 9:19 ` [PATCH 33/35] isdn: capi, drop useless pr_debugs Jiri Slaby
2021-05-05 9:19 ` [PATCH 34/35] tty: make tty_get_byte_size available Jiri Slaby
2021-05-06 7:16 ` Joe Perches
2021-05-06 7:19 ` Jiri Slaby
[not found] ` <CAHp75Vfq6ABW7ukwaKmZOF2DszmuHD28S=wcLcFowvRdXTnWmg@mail.gmail.com>
2021-05-06 8:31 ` Jiri Slaby
2021-05-06 9:33 ` Andy Shevchenko
2021-05-06 8:35 ` Joe Perches
2021-05-10 7:00 ` [PATCH v2 " Jiri Slaby
2021-05-10 9:47 ` Johan Hovold
2021-05-13 7:24 ` Jiri Slaby
2021-05-13 9:41 ` Johan Hovold
2021-05-05 9:19 ` [PATCH 35/35] tty: make use of tty_get_byte_size Jiri Slaby
2021-05-10 9:59 ` Johan Hovold
2021-05-13 15:04 ` [PATCH 00/35] tty cleanup for 5.14 Greg KH
2021-05-13 16:20 ` Johan Hovold
2021-05-13 16:29 ` Greg KH
2021-05-14 8:11 ` Johan Hovold
2021-06-10 9:02 ` [PATCH v3 1/4] tty: make tty_get_{char,frame}_size available Jiri Slaby
2021-06-10 9:02 ` [PATCH v3 2/4] mxs-auart: redefine AUART_LINECTRL_WLEN to accept bits count Jiri Slaby
2021-06-10 9:02 ` [PATCH v3 3/4] cypress_m8: switch data_bits to real character bits Jiri Slaby
2021-06-10 9:02 ` [PATCH v3 4/4] tty: make use of tty_get_{char,frame}_size Jiri Slaby
2021-06-10 15:15 ` Alex Elder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210505091928.22010-7-jslaby@suse.cz \
--to=jslaby@suse.cz \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).