linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Werner Sembach <wse@tuxedocomputers.com>
To: wse@tuxedocomputers.com, ville.syrjala@linux.intel.com,
	airlied@linux.ie, daniel@ffwll.ch,
	intel-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/3] Restructure output format computation for better expandability
Date: Wed,  5 May 2021 19:24:00 +0200	[thread overview]
Message-ID: <20210505172401.1453178-3-wse@tuxedocomputers.com> (raw)
In-Reply-To: <20210505172401.1453178-1-wse@tuxedocomputers.com>

Couples the decission between RGB and YCbCr420 mode and the check if the port
clock can archive the required frequency. Other checks and configuration steps
that where previously done in between can also be done before or after.

This allows for are cleaner implementation of retrying different color
encodings.

Slight change in behaviour: If YCbCr420 is not allowed but display is YCbCr420
only it no longer fails, but just prints an error and tries to fallback on RGB.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
---
Imho an error message in when YCbCR420 not allowed meets YCbCr420 only can be
a usefull bugfinding tool for cases of blackscreen on exotic configurations.

I'm unsure if this should be a warning instead.

From 883678ef703b6bb15cd2883eb2c5ce27d07911d3 Mon Sep 17 00:00:00 2001
From: Werner Sembach <wse@tuxedocomputers.com>
Date: Mon, 3 May 2021 15:30:40 +0200
Subject: [PATCH 2/3] Restructure output format computation for better
 expandability

---
 drivers/gpu/drm/i915/display/intel_hdmi.c | 65 ++++++++++++-----------
 1 file changed, 34 insertions(+), 31 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index 576d3d910d06..b0201d4f27eb 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -1999,29 +1999,6 @@ static bool hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
 					      INTEL_OUTPUT_FORMAT_YCBCR420);
 }
 
-static int
-intel_hdmi_ycbcr420_config(struct intel_crtc_state *crtc_state,
-			   const struct drm_connector_state *conn_state)
-{
-	struct drm_connector *connector = conn_state->connector;
-	struct drm_i915_private *i915 = to_i915(connector->dev);
-	const struct drm_display_mode *adjusted_mode =
-		&crtc_state->hw.adjusted_mode;
-
-	if (!drm_mode_is_420_only(&connector->display_info, adjusted_mode))
-		return 0;
-
-	if (!connector->ycbcr_420_allowed) {
-		drm_err(&i915->drm,
-			"Platform doesn't support YCBCR420 output\n");
-		return -EINVAL;
-	}
-
-	crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
-
-	return intel_pch_panel_fitting(crtc_state, conn_state);
-}
-
 static int intel_hdmi_compute_bpc(struct intel_encoder *encoder,
 				  struct intel_crtc_state *crtc_state,
 				  int clock)
@@ -2128,6 +2105,30 @@ static bool intel_hdmi_has_audio(struct intel_encoder *encoder,
 		return intel_conn_state->force_audio == HDMI_AUDIO_ON;
 }
 
+static int intel_hdmi_compute_output_format(struct intel_encoder *encoder,
+				     struct intel_crtc_state *crtc_state,
+				     const struct drm_connector_state *conn_state)
+{
+	struct drm_connector *connector = conn_state->connector;
+	struct drm_i915_private *i915 = to_i915(connector->dev);
+	const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
+	int ret;
+	bool ycbcr_420_only;
+
+	ycbcr_420_only = drm_mode_is_420_only(&connector->display_info, adjusted_mode);
+	if (connector->ycbcr_420_allowed && ycbcr_420_only)
+		crtc_state->output_format = INTEL_OUTPUT_FORMAT_YCBCR420;
+	else {
+		if (!connector->ycbcr_420_allowed && ycbcr_420_only)
+			drm_err(&i915->drm, "Display only supports YCbCr420 output, but connector does not allow it. Fallback to RGB, but this will likely fail.\n");
+		crtc_state->output_format = INTEL_OUTPUT_FORMAT_RGB;
+	}
+
+	ret = intel_hdmi_compute_clock(encoder, crtc_state);
+
+	return ret;
+}
+
 int intel_hdmi_compute_config(struct intel_encoder *encoder,
 			      struct intel_crtc_state *pipe_config,
 			      struct drm_connector_state *conn_state)
@@ -2152,23 +2153,25 @@ int intel_hdmi_compute_config(struct intel_encoder *encoder,
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
 		pipe_config->pixel_multiplier = 2;
 
-	ret = intel_hdmi_ycbcr420_config(pipe_config, conn_state);
-	if (ret)
-		return ret;
-
-	pipe_config->limited_color_range =
-		intel_hdmi_limited_color_range(pipe_config, conn_state);
-
 	if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv))
 		pipe_config->has_pch_encoder = true;
 
 	pipe_config->has_audio =
 		intel_hdmi_has_audio(encoder, pipe_config, conn_state);
 
-	ret = intel_hdmi_compute_clock(encoder, pipe_config);
+	ret = intel_hdmi_compute_output_format(encoder, pipe_config, conn_state);
 	if (ret)
 		return ret;
 
+	if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
+		ret = intel_pch_panel_fitting(pipe_config, conn_state);
+		if (ret)
+			return ret;
+	}
+
+	pipe_config->limited_color_range =
+		intel_hdmi_limited_color_range(pipe_config, conn_state);
+
 	if (conn_state->picture_aspect_ratio)
 		adjusted_mode->picture_aspect_ratio =
 			conn_state->picture_aspect_ratio;
-- 
2.25.1


  parent reply	other threads:[~2021-05-05 17:54 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-05 17:23 [PATCH 0/3] drm/i915/display Try YCbCr420 color when RGB fails Werner Sembach
2021-05-05 17:23 ` [PATCH 1/3] New function to avoid duplicate code in upcomming commits Werner Sembach
2021-05-06 10:19   ` [Intel-gfx] " Jani Nikula
2021-05-06 16:41     ` Werner Sembach
2021-05-06 17:33       ` Jani Nikula
2021-05-06 10:21   ` Jani Nikula
2021-05-05 17:24 ` Werner Sembach [this message]
2021-05-05 17:24 ` [PATCH 3/3] Use YCbCr420 as fallback when RGB fails Werner Sembach
  -- strict thread matches above, loose matches on Subject: below --
2021-05-05 17:14 [PATCH 0/3] drm/i915/display Try YCbCr420 color " Werner Sembach
2021-05-05 17:14 ` [PATCH 2/3] Restructure output format computation for better expandability Werner Sembach
2021-05-05 14:10 [PATCH 0/4] drm/i915/display Try YCbCr420 color when RGB fails Werner Sembach
2021-05-05 14:10 ` [PATCH 2/3] Restructure output format computation for better expandability Werner Sembach
2021-05-05 19:03   ` kernel test robot
2021-05-05 20:17   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210505172401.1453178-3-wse@tuxedocomputers.com \
    --to=wse@tuxedocomputers.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).