From: Adam Ford <aford173@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: aford@beaconembedded.com, Adam Ford <aford173@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] arm64: dts: imx8mn-beacon: Enable more audio
Date: Wed, 5 May 2021 14:11:25 -0500 [thread overview]
Message-ID: <20210505191126.1239309-2-aford173@gmail.com> (raw)
In-Reply-To: <20210505191126.1239309-1-aford173@gmail.com>
There are audio ports for SPDIF and MICFIL on the baseboard.
Enable them.
Signed-off-by: Adam Ford <aford173@gmail.com>
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
index 376ca8ff7213..cc31f2c5b4bf 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
@@ -76,6 +76,20 @@ sound {
"AMIC", "MICBIAS",
"IN3R", "AMIC";
};
+
+ sound-micfil {
+ compatible = "fsl,imx-audio-micfil";
+ model = "imx-audio-micfil";
+ cpu-dai = <&micfil>;
+ };
+
+ sound-spdif {
+ compatible = "fsl,imx-audio-spdif";
+ model = "imx-spdif";
+ spdif-controller = <&spdif1>;
+ spdif-out;
+ spdif-in;
+ };
};
&ecspi2 {
@@ -151,6 +165,15 @@ &easrc {
status = "okay";
};
+&micfil {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_micfil>;
+ assigned-clocks = <&clk IMX8MN_CLK_PDM>;
+ assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <196608000>;
+ status = "okay";
+};
+
&sai3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai3>;
@@ -165,6 +188,23 @@ &snvs_pwrkey {
status = "okay";
};
+&spdif1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdif1>;
+ assigned-clocks = <&clk IMX8MN_CLK_SPDIF1>;
+ assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <24576000>;
+ clocks = <&clk IMX8MN_CLK_AUDIO_AHB>, <&clk IMX8MN_CLK_24M>,
+ <&clk IMX8MN_CLK_SPDIF1>, <&clk IMX8MN_CLK_DUMMY>,
+ <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>,
+ <&clk IMX8MN_CLK_AUDIO_AHB>, <&clk IMX8MN_CLK_DUMMY>,
+ <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>,
+ <&clk IMX8MN_AUDIO_PLL1_OUT>, <&clk IMX8MN_AUDIO_PLL2_OUT>;
+ clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
+ "rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba", "pll8k", "pll11k";
+ status = "okay";
+};
+
&uart2 { /* console */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
@@ -226,6 +266,13 @@ MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x41
>;
};
+ pinctrl_micfil: micfilgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SAI5_RXC_PDM_CLK 0xd6
+ MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0 0xd6
+ >;
+ };
+
pinctrl_pcal6414: pcal6414-gpiogrp {
fsl,pins = <
MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19
@@ -248,6 +295,14 @@ MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0xd6
>;
};
+ pinctrl_spdif1: spdif1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6
+ MX8MN_IOMUXC_SPDIF_RX_SPDIF1_IN 0xd6
+ MX8MN_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK 0xd6
+ >;
+ };
+
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
--
2.25.1
next prev parent reply other threads:[~2021-05-05 19:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-05 19:11 [PATCH 1/2] arm64: dts: imx8mm-beacon: Enable more audio Adam Ford
2021-05-05 19:11 ` Adam Ford [this message]
2021-05-06 10:44 ` Adam Ford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210505191126.1239309-2-aford173@gmail.com \
--to=aford173@gmail.com \
--cc=aford@beaconembedded.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).