linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Steven Lee <steven_lee@aspeedtech.com>
To: Andrew Jeffery <andrew@aj.id.au>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
	"Adrian Hunter" <adrian.hunter@intel.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Ryan Chen <ryanchen.aspeed@gmail.com>,
	"moderated list:ASPEED SD/MMC DRIVER"
	<linux-aspeed@lists.ozlabs.org>,
	"moderated list:ASPEED SD/MMC DRIVER" <openbmc@lists.ozlabs.org>,
	"open list:ASPEED SD/MMC DRIVER" <linux-mmc@vger.kernel.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>,
	"moderated list:ARM/ASPEED MACHINE SUPPORT" 
	<linux-arm-kernel@lists.infradead.org>,
	open list <linux-kernel@vger.kernel.org>
Cc: <steven_lee@aspeedtech.com>, <Hongweiz@ami.com>,
	<ryan_chen@aspeedtech.com>, <chin-ting_kuo@aspeedtech.com>
Subject: [PATCH v3 5/5] mmc: sdhci-of-aspeed: Assert/Deassert reset signal before probing eMMC
Date: Thu, 6 May 2021 18:03:12 +0800	[thread overview]
Message-ID: <20210506100312.1638-6-steven_lee@aspeedtech.com> (raw)
In-Reply-To: <20210506100312.1638-1-steven_lee@aspeedtech.com>

For cleaning up the AST2600 eMMC controller, the reset signal should be
asserted and deasserted before it is probed.

Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
---
 drivers/mmc/host/sdhci-of-aspeed.c | 49 ++++++++++++++++++++++++------
 1 file changed, 40 insertions(+), 9 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-aspeed.c b/drivers/mmc/host/sdhci-of-aspeed.c
index 4979f98ffb52..8ef06f32abff 100644
--- a/drivers/mmc/host/sdhci-of-aspeed.c
+++ b/drivers/mmc/host/sdhci-of-aspeed.c
@@ -13,6 +13,7 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/reset.h>
 #include <linux/spinlock.h>
 
 #include "sdhci-pltfm.h"
@@ -36,9 +37,16 @@
 /* SDIO{14,24} */
 #define ASPEED_SDC_CAP2_SDR104         (1 * 32 + 1)
 
+#define PROBE_AFTER_ASSET_DEASSERT	0x1
+
+struct aspeed_sdc_info {
+	u32 flag;
+};
+
 struct aspeed_sdc {
 	struct clk *clk;
 	struct resource *res;
+	struct reset_control *rst;
 
 	spinlock_t lock;
 	void __iomem *regs;
@@ -78,6 +86,10 @@ struct aspeed_sdhci {
 
 };
 
+struct aspeed_sdc_info ast2600_sdc_info = {
+	.flag = PROBE_AFTER_ASSET_DEASSERT
+};
+
 /*
  * The function sets the mirror register for updating
  * capbilities of the current slot.
@@ -533,11 +545,22 @@ static struct platform_driver aspeed_sdhci_driver = {
 	.remove		= aspeed_sdhci_remove,
 };
 
+static const struct of_device_id aspeed_sdc_of_match[] = {
+	{ .compatible = "aspeed,ast2400-sd-controller", },
+	{ .compatible = "aspeed,ast2500-sd-controller", },
+	{ .compatible = "aspeed,ast2600-sd-controller", .data = &ast2600_sdc_info},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, aspeed_sdc_of_match);
+
 static int aspeed_sdc_probe(struct platform_device *pdev)
 
 {
 	struct device_node *parent, *child;
 	struct aspeed_sdc *sdc;
+	const struct of_device_id *match = NULL;
+	const struct aspeed_sdc_info *info = NULL;
 	int ret;
 
 	sdc = devm_kzalloc(&pdev->dev, sizeof(*sdc), GFP_KERNEL);
@@ -546,6 +569,23 @@ static int aspeed_sdc_probe(struct platform_device *pdev)
 
 	spin_lock_init(&sdc->lock);
 
+	match = of_match_device(aspeed_sdc_of_match, &pdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	if (match->data)
+		info = match->data;
+
+	if (info) {
+		if (info->flag & PROBE_AFTER_ASSET_DEASSERT) {
+			sdc->rst = devm_reset_control_get(&pdev->dev, NULL);
+			if (!IS_ERR(sdc->rst)) {
+				reset_control_assert(sdc->rst);
+				reset_control_deassert(sdc->rst);
+			}
+		}
+	}
+
 	sdc->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(sdc->clk))
 		return PTR_ERR(sdc->clk);
@@ -593,15 +633,6 @@ static int aspeed_sdc_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id aspeed_sdc_of_match[] = {
-	{ .compatible = "aspeed,ast2400-sd-controller", },
-	{ .compatible = "aspeed,ast2500-sd-controller", },
-	{ .compatible = "aspeed,ast2600-sd-controller", },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(of, aspeed_sdc_of_match);
-
 static struct platform_driver aspeed_sdc_driver = {
 	.driver		= {
 		.name	= "sd-controller-aspeed",
-- 
2.17.1


  parent reply	other threads:[~2021-05-06 10:08 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-06 10:03 [PATCH v3 0/5] mmc: sdhci-of-aspeed: Support toggling SD bus signal Steven Lee
2021-05-06 10:03 ` [PATCH v3 1/5] dt-bindings: mmc: sdhci-of-aspeed: Add an example for AST2600-A2 EVB Steven Lee
2021-05-07  1:13   ` Rob Herring
2021-05-07  3:13     ` Steven Lee
2021-05-07 17:21       ` Rob Herring
2021-05-10  2:32         ` Steven Lee
2021-05-06 10:03 ` [PATCH v3 2/5] ARM: dts: aspeed: ast2600evb: Add comment for gpio regulator of sdhci Steven Lee
2021-05-07  1:40   ` Andrew Jeffery
2021-05-07  3:30     ` Steven Lee
2021-05-07  3:42       ` Andrew Jeffery
2021-05-06 10:03 ` [PATCH v3 3/5] ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller Steven Lee
2021-05-07  1:34   ` Andrew Jeffery
2021-05-06 10:03 ` [PATCH v3 4/5] mmc: sdhci-of-aspeed: Add a helper for updating capability register Steven Lee
2021-05-07  2:13   ` Andrew Jeffery
2021-05-07  6:59     ` Steven Lee
2021-05-07  7:07       ` Andrew Jeffery
2021-05-06 10:03 ` Steven Lee [this message]
2021-05-06 10:24   ` [PATCH v3 5/5] mmc: sdhci-of-aspeed: Assert/Deassert reset signal before probing eMMC Philipp Zabel
2021-05-07  1:32     ` Andrew Jeffery
2021-05-07  6:24       ` Steven Lee
2021-05-07  7:36         ` Andrew Jeffery
2021-05-10  6:03           ` Steven Lee
2021-05-13  0:42             ` Andrew Jeffery
2021-05-14  2:09               ` Steven Lee
2021-05-14  2:37                 ` Andrew Jeffery
2021-05-19 10:57                   ` Steven Lee
2021-05-19 23:09                     ` Andrew Jeffery
2021-05-07  6:02     ` Steven Lee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210506100312.1638-6-steven_lee@aspeedtech.com \
    --to=steven_lee@aspeedtech.com \
    --cc=Hongweiz@ami.com \
    --cc=adrian.hunter@intel.com \
    --cc=andrew@aj.id.au \
    --cc=chin-ting_kuo@aspeedtech.com \
    --cc=devicetree@vger.kernel.org \
    --cc=joel@jms.id.au \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=openbmc@lists.ozlabs.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=ryan_chen@aspeedtech.com \
    --cc=ryanchen.aspeed@gmail.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).