From: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com, devicetree@vger.kernel.org
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
linux-bluetooth@vger.kernel.org, hemantg@codeaurora.org,
linux-arm-msm@vger.kernel.org, bgodavar@codeaurora.org,
rjliao@codeaurora.org, hbandi@codeaurora.org,
abhishekpandit@chromium.org,
Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Subject: [PATCH v3 4/5] dt-bindings: net: bluetooth: Convert Qualcomm BT binding to DT schema
Date: Thu, 6 May 2021 23:03:11 +0530 [thread overview]
Message-ID: <1620322392-27148-5-git-send-email-gubbaven@codeaurora.org> (raw)
In-Reply-To: <1620322392-27148-1-git-send-email-gubbaven@codeaurora.org>
Converted Qualcomm Bluetooth binidings to DT schema.
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
---
.../devicetree/bindings/net/qualcomm-bluetooth.txt | 69 -------------
.../bindings/net/qualcomm-bluetooth.yaml | 111 +++++++++++++++++++++
2 files changed, 111 insertions(+), 69 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
create mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
deleted file mode 100644
index 709ca6d..0000000
--- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-Qualcomm Bluetooth Chips
----------------------
-
-This documents the binding structure and common properties for serial
-attached Qualcomm devices.
-
-Serial attached Qualcomm devices shall be a child node of the host UART
-device the slave device is attached to.
-
-Required properties:
- - compatible: should contain one of the following:
- * "qcom,qca6174-bt"
- * "qcom,qca9377-bt"
- * "qcom,wcn3990-bt"
- * "qcom,wcn3991-bt"
- * "qcom,wcn3998-bt"
- * "qcom,qca6390-bt"
-
-Optional properties for compatible string qcom,qca6174-bt:
-
- - enable-gpios: gpio specifier used to enable chip
- - clocks: clock provided to the controller (SUSCLK_32KHZ)
- - firmware-name: specify the name of nvm firmware to load
-
-Optional properties for compatible string qcom,qca9377-bt:
-
- - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
-
-Required properties for compatible string qcom,wcn399x-bt:
-
- - vddio-supply: VDD_IO supply regulator handle.
- - vddxo-supply: VDD_XO supply regulator handle.
- - vddrf-supply: VDD_RF supply regulator handle.
- - vddch0-supply: VDD_CH0 supply regulator handle.
-
-Optional properties for compatible string qcom,wcn399x-bt:
-
- - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
- - firmware-name: specify the name of nvm firmware to load
- - clocks: clock provided to the controller
-
-Examples:
-
-serial@7570000 {
- label = "BT-UART";
- status = "okay";
-
- bluetooth {
- compatible = "qcom,qca6174-bt";
-
- enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
- clocks = <&divclk4>;
- firmware-name = "nvm_00440302.bin";
- };
-};
-
-serial@898000 {
- bluetooth {
- compatible = "qcom,wcn3990-bt";
-
- vddio-supply = <&vreg_s4a_1p8>;
- vddxo-supply = <&vreg_l7a_1p8>;
- vddrf-supply = <&vreg_l17a_1p3>;
- vddch0-supply = <&vreg_l25a_3p3>;
- max-speed = <3200000>;
- firmware-name = "crnv21.bin";
- clocks = <&rpmhcc RPMH_RF_CLK2>;
- };
-};
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
new file mode 100644
index 0000000..3f3ec4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Bluetooth Chips
+
+maintainers:
+ - Marcel Holtmann <marcel@holtmann.org>
+
+description:
+ This binding describes Qualcomm UART-attached bluetooth chips.
+
+properties:
+ compatible:
+ enum:
+ - qcom,qca6174-bt
+ - qcom,qca9377-bt
+ - qcom,wcn3990-bt
+ - qcom,wcn3991-bt
+ - qcom,wcn3998-bt
+ - qcom,qca6390-bt
+
+ enable-gpios:
+ maxItems: 1
+ description: gpio specifier used to enable chip
+
+ clocks:
+ maxItems: 1
+ description: clock provided to the controller (SUSCLK_32KHZ)
+
+ vddio-supply:
+ description: VDD_IO supply regulator handle
+
+ vddxo-supply:
+ description: VDD_XO supply regulator handle
+
+ vddrf-supply:
+ description: VDD_RF supply regulator handle
+
+ vddch0-supply:
+ description: VDD_CH0 supply regulator handle
+
+ max-speed:
+ description: see Documentation/devicetree/bindings/serial/serial.yaml
+
+ firmware-name:
+ description: specify the name of nvm firmware to load
+
+ local-bd-address:
+ description: see Documentation/devicetree/bindings/net/bluetooth.txt
+
+
+required:
+ - compatible
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,qca6174-bt
+ then:
+ required:
+ - enable-gpios
+ - clocks
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,wcn3990-bt
+ - qcom,wcn3991-bt
+ - qcom,wcn3998-bt
+ then:
+ required:
+ - vddio-supply
+ - vddxo-supply
+ - vddrf-supply
+ - vddch0-supply
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ serial {
+
+ bluetooth {
+ compatible = "qcom,qca6174-bt";
+ enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+ clocks = <&divclk4>;
+ firmware-name = "nvm_00440302.bin";
+ };
+ };
+ - |
+ serial {
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+ vddio-supply = <&vreg_s4a_1p8>;
+ vddxo-supply = <&vreg_l7a_1p8>;
+ vddrf-supply = <&vreg_l17a_1p3>;
+ vddch0-supply = <&vreg_l25a_3p3>;
+ max-speed = <3200000>;
+ firmware-name = "crnv21.bin";
+ };
+ };
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2021-05-06 17:34 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-06 17:33 [PATCH v3 0/5] Enable Bluetooth functinality for WCN6750 Venkata Lakshmi Narayana Gubba
2021-05-06 17:33 ` [PATCH v3 1/5] Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6750 Venkata Lakshmi Narayana Gubba
2021-05-06 17:33 ` [PATCH v3 2/5] Bluetooth: btqca: Add support for firmware image with mbn type for WCN6750 Venkata Lakshmi Narayana Gubba
2021-05-07 7:00 ` Marcel Holtmann
2021-05-10 17:16 ` gubbaven
2021-05-06 17:33 ` [PATCH v3 3/5] Bluetooth: btqca: Moved extracting rom version info to common place Venkata Lakshmi Narayana Gubba
2021-05-07 7:53 ` Marcel Holtmann
2021-05-10 17:09 ` gubbaven
2021-05-06 17:33 ` Venkata Lakshmi Narayana Gubba [this message]
2021-05-07 1:17 ` [PATCH v3 4/5] dt-bindings: net: bluetooth: Convert Qualcomm BT binding to DT schema Rob Herring
2021-05-07 6:55 ` Marcel Holtmann
2021-05-07 17:19 ` Rob Herring
2021-05-13 15:21 ` Marcel Holtmann
2021-05-18 16:30 ` gubbaven
2021-05-06 17:33 ` [PATCH v3 5/5] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip wcn6750 Venkata Lakshmi Narayana Gubba
2021-05-07 1:19 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1620322392-27148-5-git-send-email-gubbaven@codeaurora.org \
--to=gubbaven@codeaurora.org \
--cc=abhishekpandit@chromium.org \
--cc=bgodavar@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=hbandi@codeaurora.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mka@chromium.org \
--cc=rjliao@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).