[PATCH] phy: ralink: phy-mt7621-pci: properly print pointer address

From: Sergio Paracuellos <sergio.paracuellos@gmail.com>
To: vkoul@kernel.org
Cc: linux-phy@lists.infradead.org, kishon@ti.com,
	linux-kernel@vger.kernel.org, linux-staging@lists.linux.dev,
	gregkh@linuxfoundation.org, neil@brown.name,
	ilya.lipnitskiy@gmail.com, kernel test robot <lkp@intel.com>
Subject: [PATCH] phy: ralink: phy-mt7621-pci: properly print pointer address
Date: Fri,  7 May 2021 08:01:42 +0200	[thread overview]
Message-ID: <20210507060142.17049-1-sergio.paracuellos@gmail.com> (raw)

The way of printing the pointer address for the 'port_base'
address got into compile warnings on some architectures
[-Wpointer-to-int-cast]. Instead of use '%08x' and cast
to an 'unsigned int' just make use of '%px' and avoid the
cast.

Fixes: d87da32372a0 ("phy: ralink: Add PHY driver for MT7621 PCIe PHY")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
 drivers/phy/ralink/phy-mt7621-pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/ralink/phy-mt7621-pci.c b/drivers/phy/ralink/phy-mt7621-pci.c
index 753cb5bab930..4705931fb072 100644
--- a/drivers/phy/ralink/phy-mt7621-pci.c
+++ b/drivers/phy/ralink/phy-mt7621-pci.c
@@ -272,8 +272,8 @@ static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev,
 
 	mt7621_phy->has_dual_port = args->args[0];
 
-	dev_info(dev, "PHY for 0x%08x (dual port = %d)\n",
-		 (unsigned int)mt7621_phy->port_base, mt7621_phy->has_dual_port);
+	dev_info(dev, "PHY for 0x%px (dual port = %d)\n",
+		 mt7621_phy->port_base, mt7621_phy->has_dual_port);
 
 	return mt7621_phy->phy;
 }
-- 
2.25.1

