[01/11] snd: iec958: split status creation and fill
diff mbox series

Message ID 20210507140334.204865-2-maxime@cerno.tech
State New, archived
Headers show
Series
  • drm/vc4: hdmi: Enable Channel Mapping, IEC958, HBR Passthrough using hdmi-codec
Related show

Commit Message

Maxime Ripard May 7, 2021, 2:03 p.m. UTC
In some situations, like a codec probe, we need to provide an IEC status
default but don't have access to the sampling rate and width yet since
no stream has been configured yet.

Each and every driver has its own default, whereas the core iec958 code
also has some buried in the snd_pcm_create_iec958_consumer functions.

Let's split these functions in two to provide a default that doesn't
rely on the sampling rate and width, and another function to fill them
when available.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 include/sound/pcm_iec958.h |   8 +++
 sound/core/pcm_iec958.c    | 131 +++++++++++++++++++++++++------------
 2 files changed, 96 insertions(+), 43 deletions(-)

Comments

Takashi Iwai May 25, 2021, 7:33 a.m. UTC | #1
On Fri, 07 May 2021 16:03:24 +0200,
Maxime Ripard wrote:
> 
> In some situations, like a codec probe, we need to provide an IEC status
> default but don't have access to the sampling rate and width yet since
> no stream has been configured yet.
> 
> Each and every driver has its own default, whereas the core iec958 code
> also has some buried in the snd_pcm_create_iec958_consumer functions.
> 
> Let's split these functions in two to provide a default that doesn't
> rely on the sampling rate and width, and another function to fill them
> when available.
> 
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>

The changes look almost good, but please use EXPORT_SYMBOL_GPL() for
newly introduced symbols.  Also, it'd be worth to mention that some
bits update are done only for the default values; if a rate value has
been already set, it won't be overridden by this *_fill_*() call,
that's the intentional behavior, right?

Last but not least, the subject prefix should be "ALSA:" in general :)


thanks,

Takashi

> ---
>  include/sound/pcm_iec958.h |   8 +++
>  sound/core/pcm_iec958.c    | 131 +++++++++++++++++++++++++------------
>  2 files changed, 96 insertions(+), 43 deletions(-)
> 
> diff --git a/include/sound/pcm_iec958.h b/include/sound/pcm_iec958.h
> index 0939aa45e2fe..64e84441cde1 100644
> --- a/include/sound/pcm_iec958.h
> +++ b/include/sound/pcm_iec958.h
> @@ -4,6 +4,14 @@
>  
>  #include <linux/types.h>
>  
> +int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len);
> +
> +int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
> +				 size_t len);
> +
> +int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
> +					   u8 *cs, size_t len);
> +
>  int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>  	size_t len);
>  
> diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c
> index f9a211cc1f2c..a60908efe159 100644
> --- a/sound/core/pcm_iec958.c
> +++ b/sound/core/pcm_iec958.c
> @@ -9,41 +9,68 @@
>  #include <sound/pcm_params.h>
>  #include <sound/pcm_iec958.h>
>  
> -static int create_iec958_consumer(uint rate, uint sample_width,
> -				  u8 *cs, size_t len)
> +int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len)
>  {
> -	unsigned int fs, ws;
> -
>  	if (len < 4)
>  		return -EINVAL;
>  
> -	switch (rate) {
> -	case 32000:
> -		fs = IEC958_AES3_CON_FS_32000;
> -		break;
> -	case 44100:
> -		fs = IEC958_AES3_CON_FS_44100;
> -		break;
> -	case 48000:
> -		fs = IEC958_AES3_CON_FS_48000;
> -		break;
> -	case 88200:
> -		fs = IEC958_AES3_CON_FS_88200;
> -		break;
> -	case 96000:
> -		fs = IEC958_AES3_CON_FS_96000;
> -		break;
> -	case 176400:
> -		fs = IEC958_AES3_CON_FS_176400;
> -		break;
> -	case 192000:
> -		fs = IEC958_AES3_CON_FS_192000;
> -		break;
> -	default:
> +	memset(cs, 0, len);
> +
> +	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
> +	cs[1] = IEC958_AES1_CON_GENERAL;
> +	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
> +	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | IEC958_AES3_CON_FS_NOTID;
> +
> +	if (len > 4)
> +		cs[4] = IEC958_AES4_CON_WORDLEN_NOTID;
> +
> +	return len;
> +}
> +EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_default);
> +
> +static int fill_iec958_consumer(uint rate, uint sample_width,
> +				u8 *cs, size_t len)
> +{
> +	if (len < 4)
>  		return -EINVAL;
> +
> +	if ((cs[3] & IEC958_AES3_CON_FS) == IEC958_AES3_CON_FS_NOTID) {
> +		unsigned int fs;
> +
> +		switch (rate) {
> +			case 32000:
> +				fs = IEC958_AES3_CON_FS_32000;
> +				break;
> +			case 44100:
> +				fs = IEC958_AES3_CON_FS_44100;
> +				break;
> +			case 48000:
> +				fs = IEC958_AES3_CON_FS_48000;
> +				break;
> +			case 88200:
> +				fs = IEC958_AES3_CON_FS_88200;
> +				break;
> +			case 96000:
> +				fs = IEC958_AES3_CON_FS_96000;
> +				break;
> +			case 176400:
> +				fs = IEC958_AES3_CON_FS_176400;
> +				break;
> +			case 192000:
> +				fs = IEC958_AES3_CON_FS_192000;
> +				break;
> +			default:
> +				return -EINVAL;
> +		}
> +
> +		cs[3] &= ~IEC958_AES3_CON_FS;
> +		cs[3] |= fs;
>  	}
>  
> -	if (len > 4) {
> +	if (len > 4 &&
> +	    (cs[4] & IEC958_AES4_CON_WORDLEN) == IEC958_AES4_CON_WORDLEN_NOTID) {
> +		unsigned int ws;
> +
>  		switch (sample_width) {
>  		case 16:
>  			ws = IEC958_AES4_CON_WORDLEN_20_16;
> @@ -64,21 +91,30 @@ static int create_iec958_consumer(uint rate, uint sample_width,
>  		default:
>  			return -EINVAL;
>  		}
> +
> +		cs[4] &= ~IEC958_AES4_CON_WORDLEN;
> +		cs[4] |= ws;
>  	}
>  
> -	memset(cs, 0, len);
> -
> -	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
> -	cs[1] = IEC958_AES1_CON_GENERAL;
> -	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
> -	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | fs;
> -
> -	if (len > 4)
> -		cs[4] = ws;
> -
>  	return len;
>  }
>  
> +int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
> +					   u8 *cs, size_t len)
> +{
> +	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
> +}
> +EXPORT_SYMBOL(snd_pcm_fill_iec958_consumer_hw_params);
> +
> +int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime,
> +				 u8 *cs, size_t len)
> +{
> +	return fill_iec958_consumer(runtime->rate,
> +				    snd_pcm_format_width(runtime->format),
> +				    cs, len);
> +}
> +EXPORT_SYMBOL(snd_pcm_fill_iec958_consumer);
> +
>  /**
>   * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
>   * @runtime: pcm runtime structure with ->rate filled in
> @@ -95,9 +131,13 @@ static int create_iec958_consumer(uint rate, uint sample_width,
>  int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
>  	size_t len)
>  {
> -	return create_iec958_consumer(runtime->rate,
> -				      snd_pcm_format_width(runtime->format),
> -				      cs, len);
> +	int ret;
> +
> +	ret = snd_pcm_create_iec958_consumer_default(cs, len);
> +	if (ret < 0)
> +		return ret;
> +
> +	return snd_pcm_fill_iec958_consumer(runtime, cs, len);
>  }
>  EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
>  
> @@ -117,7 +157,12 @@ EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
>  int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
>  					     u8 *cs, size_t len)
>  {
> -	return create_iec958_consumer(params_rate(params), params_width(params),
> -				      cs, len);
> +	int ret;
> +
> +	ret = snd_pcm_create_iec958_consumer_default(cs, len);
> +	if (ret < 0)
> +		return ret;
> +
> +	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
>  }
>  EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);
> -- 
> 2.31.1
>
Maxime Ripard May 25, 2021, 9:33 a.m. UTC | #2
Hi,

On Tue, May 25, 2021 at 09:33:49AM +0200, Takashi Iwai wrote:
> On Fri, 07 May 2021 16:03:24 +0200,
> Maxime Ripard wrote:
> > 
> > In some situations, like a codec probe, we need to provide an IEC status
> > default but don't have access to the sampling rate and width yet since
> > no stream has been configured yet.
> > 
> > Each and every driver has its own default, whereas the core iec958 code
> > also has some buried in the snd_pcm_create_iec958_consumer functions.
> > 
> > Let's split these functions in two to provide a default that doesn't
> > rely on the sampling rate and width, and another function to fill them
> > when available.
> > 
> > Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> 
> The changes look almost good, but please use EXPORT_SYMBOL_GPL() for
> newly introduced symbols.

Ack, I'll change it.

> Also, it'd be worth to mention that some bits update are done only for
> the default values; if a rate value has been already set, it won't be
> overridden by this *_fill_*() call, that's the intentional behavior,
> right?

Sorry, I forgot to put a commit log on the patch 2 that implements this.

My intent was to provide a default in the probe, but if it was ever
overridden, we would return it in the control afterwards and pass it
along to the hw_params (and later prepare) hooks

I'll add a commit message

> Last but not least, the subject prefix should be "ALSA:" in general :)

Ok, I'll change it then

Thanks!
Maxime

Patch
diff mbox series

diff --git a/include/sound/pcm_iec958.h b/include/sound/pcm_iec958.h
index 0939aa45e2fe..64e84441cde1 100644
--- a/include/sound/pcm_iec958.h
+++ b/include/sound/pcm_iec958.h
@@ -4,6 +4,14 @@ 
 
 #include <linux/types.h>
 
+int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len);
+
+int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
+				 size_t len);
+
+int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
+					   u8 *cs, size_t len);
+
 int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
 	size_t len);
 
diff --git a/sound/core/pcm_iec958.c b/sound/core/pcm_iec958.c
index f9a211cc1f2c..a60908efe159 100644
--- a/sound/core/pcm_iec958.c
+++ b/sound/core/pcm_iec958.c
@@ -9,41 +9,68 @@ 
 #include <sound/pcm_params.h>
 #include <sound/pcm_iec958.h>
 
-static int create_iec958_consumer(uint rate, uint sample_width,
-				  u8 *cs, size_t len)
+int snd_pcm_create_iec958_consumer_default(u8 *cs, size_t len)
 {
-	unsigned int fs, ws;
-
 	if (len < 4)
 		return -EINVAL;
 
-	switch (rate) {
-	case 32000:
-		fs = IEC958_AES3_CON_FS_32000;
-		break;
-	case 44100:
-		fs = IEC958_AES3_CON_FS_44100;
-		break;
-	case 48000:
-		fs = IEC958_AES3_CON_FS_48000;
-		break;
-	case 88200:
-		fs = IEC958_AES3_CON_FS_88200;
-		break;
-	case 96000:
-		fs = IEC958_AES3_CON_FS_96000;
-		break;
-	case 176400:
-		fs = IEC958_AES3_CON_FS_176400;
-		break;
-	case 192000:
-		fs = IEC958_AES3_CON_FS_192000;
-		break;
-	default:
+	memset(cs, 0, len);
+
+	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
+	cs[1] = IEC958_AES1_CON_GENERAL;
+	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
+	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | IEC958_AES3_CON_FS_NOTID;
+
+	if (len > 4)
+		cs[4] = IEC958_AES4_CON_WORDLEN_NOTID;
+
+	return len;
+}
+EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_default);
+
+static int fill_iec958_consumer(uint rate, uint sample_width,
+				u8 *cs, size_t len)
+{
+	if (len < 4)
 		return -EINVAL;
+
+	if ((cs[3] & IEC958_AES3_CON_FS) == IEC958_AES3_CON_FS_NOTID) {
+		unsigned int fs;
+
+		switch (rate) {
+			case 32000:
+				fs = IEC958_AES3_CON_FS_32000;
+				break;
+			case 44100:
+				fs = IEC958_AES3_CON_FS_44100;
+				break;
+			case 48000:
+				fs = IEC958_AES3_CON_FS_48000;
+				break;
+			case 88200:
+				fs = IEC958_AES3_CON_FS_88200;
+				break;
+			case 96000:
+				fs = IEC958_AES3_CON_FS_96000;
+				break;
+			case 176400:
+				fs = IEC958_AES3_CON_FS_176400;
+				break;
+			case 192000:
+				fs = IEC958_AES3_CON_FS_192000;
+				break;
+			default:
+				return -EINVAL;
+		}
+
+		cs[3] &= ~IEC958_AES3_CON_FS;
+		cs[3] |= fs;
 	}
 
-	if (len > 4) {
+	if (len > 4 &&
+	    (cs[4] & IEC958_AES4_CON_WORDLEN) == IEC958_AES4_CON_WORDLEN_NOTID) {
+		unsigned int ws;
+
 		switch (sample_width) {
 		case 16:
 			ws = IEC958_AES4_CON_WORDLEN_20_16;
@@ -64,21 +91,30 @@  static int create_iec958_consumer(uint rate, uint sample_width,
 		default:
 			return -EINVAL;
 		}
+
+		cs[4] &= ~IEC958_AES4_CON_WORDLEN;
+		cs[4] |= ws;
 	}
 
-	memset(cs, 0, len);
-
-	cs[0] = IEC958_AES0_CON_NOT_COPYRIGHT | IEC958_AES0_CON_EMPHASIS_NONE;
-	cs[1] = IEC958_AES1_CON_GENERAL;
-	cs[2] = IEC958_AES2_CON_SOURCE_UNSPEC | IEC958_AES2_CON_CHANNEL_UNSPEC;
-	cs[3] = IEC958_AES3_CON_CLOCK_1000PPM | fs;
-
-	if (len > 4)
-		cs[4] = ws;
-
 	return len;
 }
 
+int snd_pcm_fill_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
+					   u8 *cs, size_t len)
+{
+	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
+}
+EXPORT_SYMBOL(snd_pcm_fill_iec958_consumer_hw_params);
+
+int snd_pcm_fill_iec958_consumer(struct snd_pcm_runtime *runtime,
+				 u8 *cs, size_t len)
+{
+	return fill_iec958_consumer(runtime->rate,
+				    snd_pcm_format_width(runtime->format),
+				    cs, len);
+}
+EXPORT_SYMBOL(snd_pcm_fill_iec958_consumer);
+
 /**
  * snd_pcm_create_iec958_consumer - create consumer format IEC958 channel status
  * @runtime: pcm runtime structure with ->rate filled in
@@ -95,9 +131,13 @@  static int create_iec958_consumer(uint rate, uint sample_width,
 int snd_pcm_create_iec958_consumer(struct snd_pcm_runtime *runtime, u8 *cs,
 	size_t len)
 {
-	return create_iec958_consumer(runtime->rate,
-				      snd_pcm_format_width(runtime->format),
-				      cs, len);
+	int ret;
+
+	ret = snd_pcm_create_iec958_consumer_default(cs, len);
+	if (ret < 0)
+		return ret;
+
+	return snd_pcm_fill_iec958_consumer(runtime, cs, len);
 }
 EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
 
@@ -117,7 +157,12 @@  EXPORT_SYMBOL(snd_pcm_create_iec958_consumer);
 int snd_pcm_create_iec958_consumer_hw_params(struct snd_pcm_hw_params *params,
 					     u8 *cs, size_t len)
 {
-	return create_iec958_consumer(params_rate(params), params_width(params),
-				      cs, len);
+	int ret;
+
+	ret = snd_pcm_create_iec958_consumer_default(cs, len);
+	if (ret < 0)
+		return ret;
+
+	return fill_iec958_consumer(params_rate(params), params_width(params), cs, len);
 }
 EXPORT_SYMBOL(snd_pcm_create_iec958_consumer_hw_params);