From: Zhen Lei <thunder.leizhen@huawei.com>
To: "James E . J . Bottomley" <jejb@linux.ibm.com>,
"Martin K . Petersen" <martin.petersen@oracle.com>,
linux-scsi <linux-scsi@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Subject: [PATCH 1/1] scsi: pmcraid: Remove several unneeded semicolons
Date: Sat, 8 May 2021 17:41:18 +0800 [thread overview]
Message-ID: <20210508094118.2783-1-thunder.leizhen@huawei.com> (raw)
The semicolon immediately following '}' is unneeded.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
---
drivers/scsi/aha1542.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/aha1542.c b/drivers/scsi/aha1542.c
index 1210e61afb1838a..7229748a57b95ff 100644
--- a/drivers/scsi/aha1542.c
+++ b/drivers/scsi/aha1542.c
@@ -304,7 +304,7 @@ static irqreturn_t aha1542_interrupt(int irq, void *dev_id)
if (flag & SCRD)
printk("SCRD ");
printk("status %02x\n", inb(STATUS(sh->io_port)));
- };
+ }
#endif
number_serviced = 0;
@@ -346,7 +346,7 @@ static irqreturn_t aha1542_interrupt(int irq, void *dev_id)
if (!number_serviced)
shost_printk(KERN_WARNING, sh, "interrupt received, but no mail.\n");
return IRQ_HANDLED;
- };
+ }
mbo = (scsi2int(mb[mbi].ccbptr) - (unsigned long)aha1542->ccb_handle) / sizeof(struct ccb);
mbistatus = mb[mbi].status;
@@ -411,7 +411,7 @@ static irqreturn_t aha1542_interrupt(int irq, void *dev_id)
*/
my_done(tmp_cmd);
number_serviced++;
- };
+ }
}
static int aha1542_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
@@ -537,7 +537,7 @@ static void setup_mailboxes(struct Scsi_Host *sh)
any2scsi(aha1542->mb[i].ccbptr,
aha1542->ccb_handle + i * sizeof(struct ccb));
aha1542->mb[AHA1542_MAILBOXES + i].status = 0;
- };
+ }
aha1542_intr_reset(sh->io_port); /* reset interrupts, so they don't block */
any2scsi(mb_cmd + 2, aha1542->mb_handle);
if (aha1542_out(sh->io_port, mb_cmd, 5))
@@ -552,7 +552,7 @@ static int aha1542_getconfig(struct Scsi_Host *sh)
i = inb(STATUS(sh->io_port));
if (i & DF) {
i = inb(DATA(sh->io_port));
- };
+ }
aha1542_outb(sh->io_port, CMD_RETCONF);
aha1542_in(sh->io_port, inquiry_result, 3, 0);
if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 0))
@@ -581,7 +581,7 @@ static int aha1542_getconfig(struct Scsi_Host *sh)
default:
shost_printk(KERN_ERR, sh, "Unable to determine DMA channel.\n");
return -1;
- };
+ }
switch (inquiry_result[1]) {
case 0x40:
sh->irq = 15;
@@ -604,7 +604,7 @@ static int aha1542_getconfig(struct Scsi_Host *sh)
default:
shost_printk(KERN_ERR, sh, "Unable to determine IRQ level.\n");
return -1;
- };
+ }
sh->this_id = inquiry_result[2] & 7;
return 0;
}
@@ -639,7 +639,7 @@ static int aha1542_mbenable(struct Scsi_Host *sh)
if (aha1542_out(sh->io_port, mbenable_cmd, 3))
goto fail;
- };
+ }
while (0) {
fail:
shost_printk(KERN_ERR, sh, "Mailbox init failed\n");
@@ -657,7 +657,7 @@ static int aha1542_query(struct Scsi_Host *sh)
i = inb(STATUS(sh->io_port));
if (i & DF) {
i = inb(DATA(sh->io_port));
- };
+ }
aha1542_outb(sh->io_port, CMD_INQUIRY);
aha1542_in(sh->io_port, inquiry_result, 4, 0);
if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 0))
@@ -676,7 +676,7 @@ static int aha1542_query(struct Scsi_Host *sh)
if (inquiry_result[0] == 0x43) {
shost_printk(KERN_INFO, sh, "Emulation mode not supported for AHA-1740 hardware, use aha1740 driver instead.\n");
return 1;
- };
+ }
/*
* Always call this - boards that do not support extended bios translation
--
2.26.0.106.g9fadedd
reply other threads:[~2021-05-08 9:41 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210508094118.2783-1-thunder.leizhen@huawei.com \
--to=thunder.leizhen@huawei.com \
--cc=jejb@linux.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).