From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: Linux Doc Mailing List <linux-doc@vger.kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
"Jonathan Corbet" <corbet@lwn.net>,
"Mark O'Donovan" <shiftee@posteo.net>,
Jiri Kosina <jikos@kernel.org>,
Jonathan Cameron <jic23@kernel.org>,
Randy Dunlap <rdunlap@infradead.org>,
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>,
linux-iio@vger.kernel.org, linux-input@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 30/53] docs: hid: avoid using UTF-8 chars
Date: Mon, 10 May 2021 12:26:42 +0200 [thread overview]
Message-ID: <a978fba250cb40dcf764eac79a939ea48b816e9a.1620641727.git.mchehab+huawei@kernel.org> (raw)
In-Reply-To: <cover.1620641727.git.mchehab+huawei@kernel.org>
While UTF-8 characters can be used at the Linux documentation,
the best is to use them only when ASCII doesn't offer a good replacement.
So, replace the occurences of the following UTF-8 characters:
- U+00a0 (' '): NO-BREAK SPACE
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/hid/hid-sensor.rst | 70 ++++----
Documentation/hid/intel-ish-hid.rst | 246 ++++++++++++++--------------
2 files changed, 158 insertions(+), 158 deletions(-)
diff --git a/Documentation/hid/hid-sensor.rst b/Documentation/hid/hid-sensor.rst
index c1c9b8d8dca6..b98d7a415cda 100644
--- a/Documentation/hid/hid-sensor.rst
+++ b/Documentation/hid/hid-sensor.rst
@@ -173,39 +173,39 @@ An example of this representation on sysfs::
/sys/devices/pci0000:00/INT33C2:00/i2c-0/i2c-INT33D1:00/0018:8086:09FA.0001/HID-SENSOR-2000e1.6.auto$ tree -R
.
- │ ├── enable_sensor
- │ │ ├── feature-0-200316
- │ │ │ ├── feature-0-200316-maximum
- │ │ │ ├── feature-0-200316-minimum
- │ │ │ ├── feature-0-200316-name
- │ │ │ ├── feature-0-200316-size
- │ │ │ ├── feature-0-200316-unit-expo
- │ │ │ ├── feature-0-200316-units
- │ │ │ ├── feature-0-200316-value
- │ │ ├── feature-1-200201
- │ │ │ ├── feature-1-200201-maximum
- │ │ │ ├── feature-1-200201-minimum
- │ │ │ ├── feature-1-200201-name
- │ │ │ ├── feature-1-200201-size
- │ │ │ ├── feature-1-200201-unit-expo
- │ │ │ ├── feature-1-200201-units
- │ │ │ ├── feature-1-200201-value
- │ │ ├── input-0-200201
- │ │ │ ├── input-0-200201-maximum
- │ │ │ ├── input-0-200201-minimum
- │ │ │ ├── input-0-200201-name
- │ │ │ ├── input-0-200201-size
- │ │ │ ├── input-0-200201-unit-expo
- │ │ │ ├── input-0-200201-units
- │ │ │ ├── input-0-200201-value
- │ │ ├── input-1-200202
- │ │ │ ├── input-1-200202-maximum
- │ │ │ ├── input-1-200202-minimum
- │ │ │ ├── input-1-200202-name
- │ │ │ ├── input-1-200202-size
- │ │ │ ├── input-1-200202-unit-expo
- │ │ │ ├── input-1-200202-units
- │ │ │ ├── input-1-200202-value
+ │ ├── enable_sensor
+ │ │ ├── feature-0-200316
+ │ │ │ ├── feature-0-200316-maximum
+ │ │ │ ├── feature-0-200316-minimum
+ │ │ │ ├── feature-0-200316-name
+ │ │ │ ├── feature-0-200316-size
+ │ │ │ ├── feature-0-200316-unit-expo
+ │ │ │ ├── feature-0-200316-units
+ │ │ │ ├── feature-0-200316-value
+ │ │ ├── feature-1-200201
+ │ │ │ ├── feature-1-200201-maximum
+ │ │ │ ├── feature-1-200201-minimum
+ │ │ │ ├── feature-1-200201-name
+ │ │ │ ├── feature-1-200201-size
+ │ │ │ ├── feature-1-200201-unit-expo
+ │ │ │ ├── feature-1-200201-units
+ │ │ │ ├── feature-1-200201-value
+ │ │ ├── input-0-200201
+ │ │ │ ├── input-0-200201-maximum
+ │ │ │ ├── input-0-200201-minimum
+ │ │ │ ├── input-0-200201-name
+ │ │ │ ├── input-0-200201-size
+ │ │ │ ├── input-0-200201-unit-expo
+ │ │ │ ├── input-0-200201-units
+ │ │ │ ├── input-0-200201-value
+ │ │ ├── input-1-200202
+ │ │ │ ├── input-1-200202-maximum
+ │ │ │ ├── input-1-200202-minimum
+ │ │ │ ├── input-1-200202-name
+ │ │ │ ├── input-1-200202-size
+ │ │ │ ├── input-1-200202-unit-expo
+ │ │ │ ├── input-1-200202-units
+ │ │ │ ├── input-1-200202-value
Here there is a custom sensor with four fields: two feature and two inputs.
Each field is represented by a set of attributes. All fields except the "value"
@@ -234,8 +234,8 @@ Once enabled and powered on, sensor can report value using HID reports.
These reports are pushed using misc device interface in a FIFO order::
/dev$ tree | grep HID-SENSOR-2000e1.6.auto
- │ │ │ ├── 10:53 -> ../HID-SENSOR-2000e1.6.auto
- │ ├── HID-SENSOR-2000e1.6.auto
+ │ │ │ ├── 10:53 -> ../HID-SENSOR-2000e1.6.auto
+ │ ├── HID-SENSOR-2000e1.6.auto
Each report can be of variable length preceded by a header. This header
consists of a 32-bit usage id, 64-bit time stamp and 32-bit length field of raw
diff --git a/Documentation/hid/intel-ish-hid.rst b/Documentation/hid/intel-ish-hid.rst
index 7a851252267a..a525cdefc937 100644
--- a/Documentation/hid/intel-ish-hid.rst
+++ b/Documentation/hid/intel-ish-hid.rst
@@ -355,133 +355,133 @@ To debug ISH, event tracing mechanism is used. To enable debug logs::
root@otcpl-ThinkPad-Yoga-260:~# tree -l /sys/bus/iio/devices/
/sys/bus/iio/devices/
├── iio:device0 -> ../../../devices/0044:8086:22D8.0001/HID-SENSOR-200073.9.auto/iio:device0
- │ ├── buffer
- │ │ ├── enable
- │ │ ├── length
- │ │ └── watermark
+ │ ├── buffer
+ │ │ ├── enable
+ │ │ ├── length
+ │ │ └── watermark
...
- │ ├── in_accel_hysteresis
- │ ├── in_accel_offset
- │ ├── in_accel_sampling_frequency
- │ ├── in_accel_scale
- │ ├── in_accel_x_raw
- │ ├── in_accel_y_raw
- │ ├── in_accel_z_raw
- │ ├── name
- │ ├── scan_elements
- │ │ ├── in_accel_x_en
- │ │ ├── in_accel_x_index
- │ │ ├── in_accel_x_type
- │ │ ├── in_accel_y_en
- │ │ ├── in_accel_y_index
- │ │ ├── in_accel_y_type
- │ │ ├── in_accel_z_en
- │ │ ├── in_accel_z_index
- │ │ └── in_accel_z_type
+ │ ├── in_accel_hysteresis
+ │ ├── in_accel_offset
+ │ ├── in_accel_sampling_frequency
+ │ ├── in_accel_scale
+ │ ├── in_accel_x_raw
+ │ ├── in_accel_y_raw
+ │ ├── in_accel_z_raw
+ │ ├── name
+ │ ├── scan_elements
+ │ │ ├── in_accel_x_en
+ │ │ ├── in_accel_x_index
+ │ │ ├── in_accel_x_type
+ │ │ ├── in_accel_y_en
+ │ │ ├── in_accel_y_index
+ │ │ ├── in_accel_y_type
+ │ │ ├── in_accel_z_en
+ │ │ ├── in_accel_z_index
+ │ │ └── in_accel_z_type
...
- │ │ ├── devices
- │ │ │ │ ├── buffer
- │ │ │ │ │ ├── enable
- │ │ │ │ │ ├── length
- │ │ │ │ │ └── watermark
- │ │ │ │ ├── dev
- │ │ │ │ ├── in_intensity_both_raw
- │ │ │ │ ├── in_intensity_hysteresis
- │ │ │ │ ├── in_intensity_offset
- │ │ │ │ ├── in_intensity_sampling_frequency
- │ │ │ │ ├── in_intensity_scale
- │ │ │ │ ├── name
- │ │ │ │ ├── scan_elements
- │ │ │ │ │ ├── in_intensity_both_en
- │ │ │ │ │ ├── in_intensity_both_index
- │ │ │ │ │ └── in_intensity_both_type
- │ │ │ │ ├── trigger
- │ │ │ │ │ └── current_trigger
+ │ │ ├── devices
+ │ │ │ │ ├── buffer
+ │ │ │ │ │ ├── enable
+ │ │ │ │ │ ├── length
+ │ │ │ │ │ └── watermark
+ │ │ │ │ ├── dev
+ │ │ │ │ ├── in_intensity_both_raw
+ │ │ │ │ ├── in_intensity_hysteresis
+ │ │ │ │ ├── in_intensity_offset
+ │ │ │ │ ├── in_intensity_sampling_frequency
+ │ │ │ │ ├── in_intensity_scale
+ │ │ │ │ ├── name
+ │ │ │ │ ├── scan_elements
+ │ │ │ │ │ ├── in_intensity_both_en
+ │ │ │ │ │ ├── in_intensity_both_index
+ │ │ │ │ │ └── in_intensity_both_type
+ │ │ │ │ ├── trigger
+ │ │ │ │ │ └── current_trigger
...
- │ │ │ │ ├── buffer
- │ │ │ │ │ ├── enable
- │ │ │ │ │ ├── length
- │ │ │ │ │ └── watermark
- │ │ │ │ ├── dev
- │ │ │ │ ├── in_magn_hysteresis
- │ │ │ │ ├── in_magn_offset
- │ │ │ │ ├── in_magn_sampling_frequency
- │ │ │ │ ├── in_magn_scale
- │ │ │ │ ├── in_magn_x_raw
- │ │ │ │ ├── in_magn_y_raw
- │ │ │ │ ├── in_magn_z_raw
- │ │ │ │ ├── in_rot_from_north_magnetic_tilt_comp_raw
- │ │ │ │ ├── in_rot_hysteresis
- │ │ │ │ ├── in_rot_offset
- │ │ │ │ ├── in_rot_sampling_frequency
- │ │ │ │ ├── in_rot_scale
- │ │ │ │ ├── name
+ │ │ │ │ ├── buffer
+ │ │ │ │ │ ├── enable
+ │ │ │ │ │ ├── length
+ │ │ │ │ │ └── watermark
+ │ │ │ │ ├── dev
+ │ │ │ │ ├── in_magn_hysteresis
+ │ │ │ │ ├── in_magn_offset
+ │ │ │ │ ├── in_magn_sampling_frequency
+ │ │ │ │ ├── in_magn_scale
+ │ │ │ │ ├── in_magn_x_raw
+ │ │ │ │ ├── in_magn_y_raw
+ │ │ │ │ ├── in_magn_z_raw
+ │ │ │ │ ├── in_rot_from_north_magnetic_tilt_comp_raw
+ │ │ │ │ ├── in_rot_hysteresis
+ │ │ │ │ ├── in_rot_offset
+ │ │ │ │ ├── in_rot_sampling_frequency
+ │ │ │ │ ├── in_rot_scale
+ │ │ │ │ ├── name
...
- │ │ │ │ ├── scan_elements
- │ │ │ │ │ ├── in_magn_x_en
- │ │ │ │ │ ├── in_magn_x_index
- │ │ │ │ │ ├── in_magn_x_type
- │ │ │ │ │ ├── in_magn_y_en
- │ │ │ │ │ ├── in_magn_y_index
- │ │ │ │ │ ├── in_magn_y_type
- │ │ │ │ │ ├── in_magn_z_en
- │ │ │ │ │ ├── in_magn_z_index
- │ │ │ │ │ ├── in_magn_z_type
- │ │ │ │ │ ├── in_rot_from_north_magnetic_tilt_comp_en
- │ │ │ │ │ ├── in_rot_from_north_magnetic_tilt_comp_index
- │ │ │ │ │ └── in_rot_from_north_magnetic_tilt_comp_type
- │ │ │ │ ├── trigger
- │ │ │ │ │ └── current_trigger
+ │ │ │ │ ├── scan_elements
+ │ │ │ │ │ ├── in_magn_x_en
+ │ │ │ │ │ ├── in_magn_x_index
+ │ │ │ │ │ ├── in_magn_x_type
+ │ │ │ │ │ ├── in_magn_y_en
+ │ │ │ │ │ ├── in_magn_y_index
+ │ │ │ │ │ ├── in_magn_y_type
+ │ │ │ │ │ ├── in_magn_z_en
+ │ │ │ │ │ ├── in_magn_z_index
+ │ │ │ │ │ ├── in_magn_z_type
+ │ │ │ │ │ ├── in_rot_from_north_magnetic_tilt_comp_en
+ │ │ │ │ │ ├── in_rot_from_north_magnetic_tilt_comp_index
+ │ │ │ │ │ └── in_rot_from_north_magnetic_tilt_comp_type
+ │ │ │ │ ├── trigger
+ │ │ │ │ │ └── current_trigger
...
- │ │ │ │ ├── buffer
- │ │ │ │ │ ├── enable
- │ │ │ │ │ ├── length
- │ │ │ │ │ └── watermark
- │ │ │ │ ├── dev
- │ │ │ │ ├── in_anglvel_hysteresis
- │ │ │ │ ├── in_anglvel_offset
- │ │ │ │ ├── in_anglvel_sampling_frequency
- │ │ │ │ ├── in_anglvel_scale
- │ │ │ │ ├── in_anglvel_x_raw
- │ │ │ │ ├── in_anglvel_y_raw
- │ │ │ │ ├── in_anglvel_z_raw
- │ │ │ │ ├── name
- │ │ │ │ ├── scan_elements
- │ │ │ │ │ ├── in_anglvel_x_en
- │ │ │ │ │ ├── in_anglvel_x_index
- │ │ │ │ │ ├── in_anglvel_x_type
- │ │ │ │ │ ├── in_anglvel_y_en
- │ │ │ │ │ ├── in_anglvel_y_index
- │ │ │ │ │ ├── in_anglvel_y_type
- │ │ │ │ │ ├── in_anglvel_z_en
- │ │ │ │ │ ├── in_anglvel_z_index
- │ │ │ │ │ └── in_anglvel_z_type
- │ │ │ │ ├── trigger
- │ │ │ │ │ └── current_trigger
+ │ │ │ │ ├── buffer
+ │ │ │ │ │ ├── enable
+ │ │ │ │ │ ├── length
+ │ │ │ │ │ └── watermark
+ │ │ │ │ ├── dev
+ │ │ │ │ ├── in_anglvel_hysteresis
+ │ │ │ │ ├── in_anglvel_offset
+ │ │ │ │ ├── in_anglvel_sampling_frequency
+ │ │ │ │ ├── in_anglvel_scale
+ │ │ │ │ ├── in_anglvel_x_raw
+ │ │ │ │ ├── in_anglvel_y_raw
+ │ │ │ │ ├── in_anglvel_z_raw
+ │ │ │ │ ├── name
+ │ │ │ │ ├── scan_elements
+ │ │ │ │ │ ├── in_anglvel_x_en
+ │ │ │ │ │ ├── in_anglvel_x_index
+ │ │ │ │ │ ├── in_anglvel_x_type
+ │ │ │ │ │ ├── in_anglvel_y_en
+ │ │ │ │ │ ├── in_anglvel_y_index
+ │ │ │ │ │ ├── in_anglvel_y_type
+ │ │ │ │ │ ├── in_anglvel_z_en
+ │ │ │ │ │ ├── in_anglvel_z_index
+ │ │ │ │ │ └── in_anglvel_z_type
+ │ │ │ │ ├── trigger
+ │ │ │ │ │ └── current_trigger
...
- │ │ │ │ ├── buffer
- │ │ │ │ │ ├── enable
- │ │ │ │ │ ├── length
- │ │ │ │ │ └── watermark
- │ │ │ │ ├── dev
- │ │ │ │ ├── in_anglvel_hysteresis
- │ │ │ │ ├── in_anglvel_offset
- │ │ │ │ ├── in_anglvel_sampling_frequency
- │ │ │ │ ├── in_anglvel_scale
- │ │ │ │ ├── in_anglvel_x_raw
- │ │ │ │ ├── in_anglvel_y_raw
- │ │ │ │ ├── in_anglvel_z_raw
- │ │ │ │ ├── name
- │ │ │ │ ├── scan_elements
- │ │ │ │ │ ├── in_anglvel_x_en
- │ │ │ │ │ ├── in_anglvel_x_index
- │ │ │ │ │ ├── in_anglvel_x_type
- │ │ │ │ │ ├── in_anglvel_y_en
- │ │ │ │ │ ├── in_anglvel_y_index
- │ │ │ │ │ ├── in_anglvel_y_type
- │ │ │ │ │ ├── in_anglvel_z_en
- │ │ │ │ │ ├── in_anglvel_z_index
- │ │ │ │ │ └── in_anglvel_z_type
- │ │ │ │ ├── trigger
- │ │ │ │ │ └── current_trigger
+ │ │ │ │ ├── buffer
+ │ │ │ │ │ ├── enable
+ │ │ │ │ │ ├── length
+ │ │ │ │ │ └── watermark
+ │ │ │ │ ├── dev
+ │ │ │ │ ├── in_anglvel_hysteresis
+ │ │ │ │ ├── in_anglvel_offset
+ │ │ │ │ ├── in_anglvel_sampling_frequency
+ │ │ │ │ ├── in_anglvel_scale
+ │ │ │ │ ├── in_anglvel_x_raw
+ │ │ │ │ ├── in_anglvel_y_raw
+ │ │ │ │ ├── in_anglvel_z_raw
+ │ │ │ │ ├── name
+ │ │ │ │ ├── scan_elements
+ │ │ │ │ │ ├── in_anglvel_x_en
+ │ │ │ │ │ ├── in_anglvel_x_index
+ │ │ │ │ │ ├── in_anglvel_x_type
+ │ │ │ │ │ ├── in_anglvel_y_en
+ │ │ │ │ │ ├── in_anglvel_y_index
+ │ │ │ │ │ ├── in_anglvel_y_type
+ │ │ │ │ │ ├── in_anglvel_z_en
+ │ │ │ │ │ ├── in_anglvel_z_index
+ │ │ │ │ │ └── in_anglvel_z_type
+ │ │ │ │ ├── trigger
+ │ │ │ │ │ └── current_trigger
...
--
2.30.2
next prev parent reply other threads:[~2021-05-10 10:36 UTC|newest]
Thread overview: 92+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-10 10:26 [PATCH 00/53] Get rid of UTF-8 chars that can be mapped as ASCII Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 01/53] docs: cdrom-standard.rst: get rid of uneeded UTF-8 chars Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 02/53] docs: ABI: remove a meaningless UTF-8 character Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 03/53] docs: ABI: remove some spurious characters Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 04/53] docs: index.rst: avoid using UTF-8 chars Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 05/53] docs: hwmon: " Mauro Carvalho Chehab
2021-05-10 13:30 ` Guenter Roeck
2021-05-10 10:26 ` [PATCH 06/53] docs: admin-guide: " Mauro Carvalho Chehab
2021-05-10 18:40 ` Gabriel Krisman Bertazi
2021-05-12 8:44 ` Mauro Carvalho Chehab
2021-05-12 9:25 ` David Woodhouse
2021-05-12 10:22 ` Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 07/53] docs: admin-guide: media: ipu3.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 08/53] docs: admin-guide: sysctl: kernel.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 09/53] docs: admin-guide: perf: imx-ddr.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 10/53] docs: admin-guide: pm: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 11/53] docs: trace: coresight: coresight-etm4x-reference.rst: " Mauro Carvalho Chehab
2021-05-10 19:28 ` Mathieu Poirier
2021-05-10 10:26 ` [PATCH 12/53] docs: driver-api: " Mauro Carvalho Chehab
[not found] ` <CAHp75Vegsb-+fVppv3C7Jp0a=mEGAh2pchX=Cr5ZvOMFt+G73Q@mail.gmail.com>
2021-05-12 8:49 ` Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 13/53] docs: driver-api: fpga: " Mauro Carvalho Chehab
2021-05-10 17:48 ` Moritz Fischer
2021-05-10 10:26 ` [PATCH 14/53] docs: driver-api: iio: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 15/53] docs: driver-api: thermal: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 16/53] docs: driver-api: media: drivers: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 17/53] docs: driver-api: firmware: other_interfaces.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 18/53] docs: driver-api: nvdimm: btt.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 19/53] docs: fault-injection: nvme-fault-injection.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 20/53] docs: usb: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 21/53] docs: process: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 22/53] docs: block: data-integrity.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 23/53] docs: userspace-api: media: fdl-appendix.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 24/53] docs: userspace-api: media: v4l: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 25/53] docs: userspace-api: media: dvb: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 26/53] docs: vm: zswap.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 27/53] docs: filesystems: f2fs.rst: " Mauro Carvalho Chehab
2021-05-11 3:16 ` [f2fs-dev] " Chao Yu
2021-05-10 10:26 ` [PATCH 28/53] docs: filesystems: ext4: " Mauro Carvalho Chehab
2021-05-10 19:23 ` Theodore Ts'o
2021-05-10 10:26 ` [PATCH 29/53] docs: kernel-hacking: " Mauro Carvalho Chehab
2021-05-10 10:26 ` Mauro Carvalho Chehab [this message]
2021-05-10 10:26 ` [PATCH 31/53] docs: security: tpm: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 32/53] docs: security: keys: trusted-encrypted.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 33/53] docs: riscv: vm-layout.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 34/53] docs: networking: scaling.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 35/53] docs: networking: devlink: devlink-dpipe.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 36/53] docs: networking: device_drivers: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 37/53] docs: x86: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 38/53] docs: scheduler: sched-deadline.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 39/53] docs: dev-tools: testing-overview.rst: " Mauro Carvalho Chehab
2021-05-10 10:48 ` Marco Elver
2021-05-12 8:52 ` Mauro Carvalho Chehab
2021-05-10 23:35 ` David Gow
2021-05-12 8:14 ` Mauro Carvalho Chehab
2021-05-12 8:29 ` Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 40/53] docs: power: powercap: powercap.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 41/53] docs: ABI: " Mauro Carvalho Chehab
2021-05-10 13:53 ` Guenter Roeck
2021-05-10 10:26 ` [PATCH 42/53] docs: doc-guide: contributing.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 43/53] docs: PCI: acpi-info.rst: " Mauro Carvalho Chehab
2021-05-10 10:37 ` Krzysztof Wilczyński
2021-05-10 10:26 ` [PATCH 44/53] docs: gpu: " Mauro Carvalho Chehab
2021-05-10 11:16 ` Jani Nikula
2021-05-10 12:36 ` Liviu Dudau
2021-05-10 10:26 ` [PATCH 45/53] docs: sound: kernel-api: writing-an-alsa-driver.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 46/53] docs: arm64: arm-acpi.rst: " Mauro Carvalho Chehab
2021-05-10 10:26 ` [PATCH 47/53] docs: infiniband: tag_matching.rst: " Mauro Carvalho Chehab
2021-05-10 10:27 ` [PATCH 48/53] docs: timers: no_hz.rst: " Mauro Carvalho Chehab
2021-05-10 10:27 ` [PATCH 49/53] docs: misc-devices: ibmvmc.rst: " Mauro Carvalho Chehab
2021-05-10 10:27 ` [PATCH 50/53] docs: firmware-guide: acpi: lpit.rst: " Mauro Carvalho Chehab
2021-05-10 10:27 ` [PATCH 51/53] docs: firmware-guide: acpi: dsd: graph.rst: " Mauro Carvalho Chehab
2021-05-10 10:27 ` [PATCH 52/53] docs: virt: kvm: " Mauro Carvalho Chehab
2021-05-10 10:27 ` [PATCH 53/53] docs: RCU: " Mauro Carvalho Chehab
2021-05-11 0:05 ` Paul E. McKenney
2021-05-10 10:52 ` [PATCH 00/53] Get rid of UTF-8 chars that can be mapped as ASCII Thorsten Leemhuis
2021-05-10 11:19 ` Mauro Carvalho Chehab
2021-05-10 12:27 ` Mauro Carvalho Chehab
2021-05-10 10:54 ` David Woodhouse
2021-05-10 11:55 ` Mauro Carvalho Chehab
2021-05-10 13:16 ` Edward Cree
2021-05-10 13:38 ` Mauro Carvalho Chehab
2021-05-10 13:58 ` Edward Cree
2021-05-10 13:59 ` Matthew Wilcox
2021-05-10 14:33 ` Edward Cree
2021-05-11 9:00 ` Mauro Carvalho Chehab
2021-05-11 9:19 ` David Woodhouse
2021-05-10 13:49 ` David Woodhouse
2021-05-10 19:22 ` Theodore Ts'o
2021-05-11 9:37 ` Mauro Carvalho Chehab
2021-05-11 9:25 ` Mauro Carvalho Chehab
2021-05-10 14:00 ` Ben Boeckel
2021-05-10 21:57 ` Adam Borowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a978fba250cb40dcf764eac79a939ea48b816e9a.1620641727.git.mchehab+huawei@kernel.org \
--to=mchehab+huawei@kernel.org \
--cc=corbet@lwn.net \
--cc=jic23@kernel.org \
--cc=jikos@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rdunlap@infradead.org \
--cc=shiftee@posteo.net \
--cc=srinivas.pandruvada@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).