From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
kernel@pengutronix.de, netdev@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-imx@nxp.com,
Fabio Estevam <festevam@gmail.com>,
David Jander <david@protonic.nl>,
Russell King <linux@armlinux.org.uk>,
Philippe Schenker <philippe.schenker@toradex.com>
Subject: [PATCH v3 2/2] ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value
Date: Tue, 11 May 2021 06:30:39 +0200 [thread overview]
Message-ID: <20210511043039.20056-3-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20210511043039.20056-1-o.rempel@pengutronix.de>
Without SoC specific PHY fixups the network interface on this board will
fail to work. Provide missing DT properties to make it work again.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/arm/boot/dts/imx6dl-riotboard.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 065d3ab0f50a..e7d9bfbfd0e4 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -106,6 +106,8 @@ rgmii_phy: ethernet-phy@4 {
reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <1000>;
+ qca,smarteee-tw-us-1g = <24>;
+ qca,clk-out-frequency = <125000000>;
};
};
};
--
2.29.2
next prev parent reply other threads:[~2021-05-11 4:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-11 4:30 [PATCH v3 0/2] remove different PHY fixups - dts part Oleksij Rempel
2021-05-11 4:30 ` [PATCH v3 1/2] ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID Oleksij Rempel
2021-05-11 12:48 ` Andrew Lunn
2021-05-11 4:30 ` Oleksij Rempel [this message]
2021-05-11 12:48 ` [PATCH v3 2/2] ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value Andrew Lunn
2021-05-23 3:25 ` [PATCH v3 0/2] remove different PHY fixups - dts part Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210511043039.20056-3-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=andrew@lunn.ch \
--cc=david@protonic.nl \
--cc=f.fainelli@gmail.com \
--cc=festevam@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=philippe.schenker@toradex.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).