linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, linus.walleij@linaro.org,
	bgolaszewski@baylibre.com, jay.xu@rock-chips.com,
	shawn.lin@rock-chips.com, david.wu@rock-chips.com,
	zhangqing@rock-chips.com, huangtao@rock-chips.com,
	cl@rock-chips.com, linux-gpio@vger.kernel.org,
	linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 2/4] dt-bindings: soc: rockchip: convert grf.txt to YAML
Date: Tue, 11 May 2021 07:05:09 +0200	[thread overview]
Message-ID: <20210511050511.5973-3-jbx6244@gmail.com> (raw)
In-Reply-To: <20210511050511.5973-1-jbx6244@gmail.com>

Current dts files with 'grf' nodes are manually verified.
In order to automate this process grf.txt has to be
converted to YAML.

Most compatibility strings are in use with "simple-mfd" added.

Add description already in use:
"rockchip,rv1108-pmugrf", "syscon"

Add new descriptions for:
"rockchip,rk3568-grf", "syscon", "simple-mfd"
"rockchip,rk3568-pmugrf", "syscon", "simple-mfd"

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---

Changed V4:
  revert separate schemas for each 'if' subset
  add additionalProperties
  move properties to top level

Changed V3:
  remove select
  change unevaluatedProperties
  add separate schemas for each 'if' subset

Changed V2:
  add rockchip,rk3328-grf-gpio.yaml
  rename grf-gpio nodename
---
 .../devicetree/bindings/soc/rockchip/grf.txt       |  61 -----
 .../devicetree/bindings/soc/rockchip/grf.yaml      | 246 +++++++++++++++++++++
 2 files changed, 246 insertions(+), 61 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/soc/rockchip/grf.txt
 create mode 100644 Documentation/devicetree/bindings/soc/rockchip/grf.yaml

diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
deleted file mode 100644
index f96511aa3..000000000
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Rockchip General Register Files (GRF)
-
-The general register file will be used to do static set by software, which
-is composed of many registers for system control.
-
-From RK3368 SoCs, the GRF is divided into two sections,
-- GRF, used for general non-secure system,
-- SGRF, used for general secure system,
-- PMUGRF, used for always on system
-
-On RK3328 SoCs, the GRF adds a section for USB2PHYGRF,
-
-ON RK3308 SoC, the GRF is divided into four sections:
-- GRF, used for general non-secure system,
-- SGRF, used for general secure system,
-- DETECTGRF, used for audio codec system,
-- COREGRF, used for pvtm,
-
-Required Properties:
-
-- compatible: GRF should be one of the following:
-   - "rockchip,px30-grf", "syscon": for px30
-   - "rockchip,rk3036-grf", "syscon": for rk3036
-   - "rockchip,rk3066-grf", "syscon": for rk3066
-   - "rockchip,rk3188-grf", "syscon": for rk3188
-   - "rockchip,rk3228-grf", "syscon": for rk3228
-   - "rockchip,rk3288-grf", "syscon": for rk3288
-   - "rockchip,rk3308-grf", "syscon": for rk3308
-   - "rockchip,rk3328-grf", "syscon": for rk3328
-   - "rockchip,rk3368-grf", "syscon": for rk3368
-   - "rockchip,rk3399-grf", "syscon": for rk3399
-   - "rockchip,rv1108-grf", "syscon": for rv1108
-- compatible: DETECTGRF should be one of the following:
-   - "rockchip,rk3308-detect-grf", "syscon": for rk3308
-- compatilbe: COREGRF should be one of the following:
-   - "rockchip,rk3308-core-grf", "syscon": for rk3308
-- compatible: PMUGRF should be one of the following:
-   - "rockchip,px30-pmugrf", "syscon": for px30
-   - "rockchip,rk3368-pmugrf", "syscon": for rk3368
-   - "rockchip,rk3399-pmugrf", "syscon": for rk3399
-- compatible: SGRF should be one of the following:
-   - "rockchip,rk3288-sgrf", "syscon": for rk3288
-- compatible: USB2PHYGRF should be one of the following:
-   - "rockchip,px30-usb2phy-grf", "syscon": for px30
-   - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328
-- compatible: USBGRF should be one of the following:
-   - "rockchip,rv1108-usbgrf", "syscon": for rv1108
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-Example: GRF and PMUGRF of RK3399 SoCs
-
-	pmugrf: syscon@ff320000 {
-		compatible = "rockchip,rk3399-pmugrf", "syscon";
-		reg = <0x0 0xff320000 0x0 0x1000>;
-	};
-
-	grf: syscon@ff770000 {
-		compatible = "rockchip,rk3399-grf", "syscon";
-		reg = <0x0 0xff770000 0x0 0x10000>;
-	};
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
new file mode 100644
index 000000000..8034458fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -0,0 +1,246 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/rockchip/grf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip General Register Files (GRF)
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - rockchip,rk3066-grf
+              - rockchip,rk3188-grf
+              - rockchip,rk3288-sgrf
+              - rockchip,rv1108-pmugrf
+              - rockchip,rv1108-usbgrf
+          - const: syscon
+      - items:
+          - enum:
+              - rockchip,px30-grf
+              - rockchip,px30-pmugrf
+              - rockchip,px30-usb2phy-grf
+              - rockchip,rk3036-grf
+              - rockchip,rk3228-grf
+              - rockchip,rk3288-grf
+              - rockchip,rk3308-core-grf
+              - rockchip,rk3308-detect-grf
+              - rockchip,rk3308-grf
+              - rockchip,rk3328-grf
+              - rockchip,rk3328-usb2phy-grf
+              - rockchip,rk3368-grf
+              - rockchip,rk3368-pmugrf
+              - rockchip,rk3399-grf
+              - rockchip,rk3399-pmugrf
+              - rockchip,rk3568-grf
+              - rockchip,rk3568-pmugrf
+              - rockchip,rv1108-grf
+          - const: syscon
+          - const: simple-mfd
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties:
+  type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-grf
+
+    then:
+      properties:
+        lvds:
+          description:
+            Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3288-grf
+
+    then:
+      properties:
+        edp-phy:
+          description:
+            Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
+
+        usbphy:
+          description:
+            Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3328-grf
+
+    then:
+      properties:
+        gpio:
+          type: object
+
+          $ref: "/schemas/gpio/rockchip,rk3328-grf-gpio.yaml#"
+
+          unevaluatedProperties: false
+
+        power-controller:
+          type: object
+
+          $ref: "/schemas/power/rockchip,power-controller.yaml#"
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3399-grf
+
+    then:
+      properties:
+        mipi-dphy-rx0:
+          type: object
+
+          $ref: "/schemas/phy/rockchip-mipi-dphy-rx0.yaml#"
+
+          unevaluatedProperties: false
+
+        pcie-phy:
+          description:
+            Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
+
+      patternProperties:
+        "phy@[0-9a-f]+$":
+          description:
+            Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-pmugrf
+              - rockchip,rk3036-grf
+              - rockchip,rk3308-grf
+              - rockchip,rk3368-pmugrf
+
+    then:
+      properties:
+        reboot-mode:
+          type: object
+
+          $ref: "/schemas/power/reset/syscon-reboot-mode.yaml#"
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-usb2phy-grf
+              - rockchip,rk3228-grf
+              - rockchip,rk3328-usb2phy-grf
+              - rockchip,rk3399-grf
+              - rockchip,rv1108-grf
+
+    then:
+      required:
+        - "#address-cells"
+        - "#size-cells"
+
+      patternProperties:
+        "usb2-phy@[0-9a-f]+$":
+          type: object
+
+          $ref: "/schemas/phy/phy-rockchip-inno-usb2.yaml#"
+
+          unevaluatedProperties: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,px30-pmugrf
+              - rockchip,px30-grf
+              - rockchip,rk3228-grf
+              - rockchip,rk3288-grf
+              - rockchip,rk3328-grf
+              - rockchip,rk3368-pmugrf
+              - rockchip,rk3368-grf
+              - rockchip,rk3399-pmugrf
+              - rockchip,rk3399-grf
+
+    then:
+      properties:
+        io-domains:
+          description:
+            Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3399-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/rk3399-power.h>
+    grf: syscon@ff770000 {
+      compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+      reg = <0xff770000 0x10000>;
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      mipi_dphy_rx0: mipi-dphy-rx0 {
+        compatible = "rockchip,rk3399-mipi-dphy-rx0";
+        clocks = <&cru SCLK_MIPIDPHY_REF>,
+                 <&cru SCLK_DPHY_RX0_CFG>,
+                 <&cru PCLK_VIO_GRF>;
+        clock-names = "dphy-ref", "dphy-cfg", "grf";
+        power-domains = <&power RK3399_PD_VIO>;
+        #phy-cells = <0>;
+      };
+
+      u2phy0: usb2-phy@e450 {
+        compatible = "rockchip,rk3399-usb2phy";
+        reg = <0xe450 0x10>;
+        clocks = <&cru SCLK_USB2PHY0_REF>;
+        clock-names = "phyclk";
+        #clock-cells = <0>;
+        clock-output-names = "clk_usbphy0_480m";
+        #phy-cells = <0>;
+
+        u2phy0_host: host-port {
+          #phy-cells = <0>;
+          interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
+          interrupt-names = "linestate";
+         };
+
+        u2phy0_otg: otg-port {
+          #phy-cells = <0>;
+          interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+                       <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+                       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
+          interrupt-names = "otg-bvalid", "otg-id",
+                            "linestate";
+        };
+      };
+    };
-- 
2.11.0


  parent reply	other threads:[~2021-05-11  5:05 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-11  5:05 [PATCH v4 0/4] convert grf.txt to YAML Johan Jonker
2021-05-11  5:05 ` [PATCH v4 1/4] dt-bindings: gpio: convert rk3328-grf-gpio.txt " Johan Jonker
2021-05-12 11:33   ` Bartosz Golaszewski
2021-05-11  5:05 ` Johan Jonker [this message]
2021-05-11 16:28   ` [PATCH v4 2/4] dt-bindings: soc: rockchip: convert grf.txt " Rob Herring
2021-05-11  5:05 ` [PATCH v4 3/4] ARM: dts: rockchip: add grf register compatible for rk3066/rk3188 Johan Jonker
2021-05-11  5:05 ` [PATCH v4 4/4] arm64: dts: rename grf-gpio nodename in rk3328.dtsi Johan Jonker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210511050511.5973-3-jbx6244@gmail.com \
    --to=jbx6244@gmail.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=cl@rock-chips.com \
    --cc=david.wu@rock-chips.com \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=huangtao@rock-chips.com \
    --cc=jay.xu@rock-chips.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=shawn.lin@rock-chips.com \
    --cc=zhangqing@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).