From: Jonathan Marek <jonathan@marek.ca>
To: linux-arm-msm@vger.kernel.org
Cc: robert.foss@linaro.org, andrey.konovalov@linaro.org,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Todor Tomov <todor.too@gmail.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
linux-media@vger.kernel.org (open list:QUALCOMM CAMERA SUBSYSTEM
DRIVER),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 17/17] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding
Date: Tue, 11 May 2021 14:07:24 -0400 [thread overview]
Message-ID: <20210511180728.23781-18-jonathan@marek.ca> (raw)
In-Reply-To: <20210511180728.23781-1-jonathan@marek.ca>
Add bindings for qcom,sm8250-camss in order to support the camera
subsystem for SM8250.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
.../bindings/media/qcom,sm8250-camss.yaml | 398 ++++++++++++++++++
1 file changed, 398 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
diff --git a/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
new file mode 100644
index 000000000000..9a7896d3d9ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/qcom,sm8250-camss.yaml
@@ -0,0 +1,398 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/media/qcom,sm8250-camss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm CAMSS ISP
+
+maintainers:
+ - Robert Foss <robert.foss@linaro.org>
+
+description: |
+ The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
+
+properties:
+ compatible:
+ const: qcom,sm8250-camss
+
+ clocks:
+ minItems: 30
+ maxItems: 30
+
+ clock-names:
+ items:
+ - const: cam_hf_axi
+ - const: csiphy0
+ - const: csiphy0_timer
+ - const: csiphy1
+ - const: csiphy1_timer
+ - const: csiphy2
+ - const: csiphy2_timer
+ - const: csiphy3
+ - const: csiphy3_timer
+ - const: csiphy4
+ - const: csiphy4_timer
+ - const: csiphy5
+ - const: csiphy5_timer
+ - const: vfe0_ahb
+ - const: vfe0_axi
+ - const: vfe0
+ - const: vfe0_cphy_rx
+ - const: vfe0_csid
+ - const: vfe0_areg
+ - const: vfe1_ahb
+ - const: vfe1_axi
+ - const: vfe1
+ - const: vfe1_cphy_rx
+ - const: vfe1_csid
+ - const: vfe1_areg
+ - const: vfe_lite_ahb
+ - const: vfe_lite_axi
+ - const: vfe_lite
+ - const: vfe_lite_cphy_rx
+ - const: vfe_lite_csid
+
+ interrupts:
+ minItems: 14
+ maxItems: 14
+
+ interrupt-names:
+ items:
+ - const: csid0
+ - const: csid1
+ - const: csid2
+ - const: csid3
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: csiphy3
+ - const: csiphy4
+ - const: csiphy5
+ - const: vfe0
+ - const: vfe1
+ - const: vfe_lite0
+ - const: vfe_lite1
+
+ iommus:
+ maxItems: 1
+
+ power-domains:
+ items:
+ - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
+ - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ description:
+ CSI input ports.
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@1:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@2:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@3:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@4:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ port@5:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port for receiving CSI data.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ maxItems: 1
+
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ required:
+ - clock-lanes
+ - data-lanes
+
+ reg:
+ minItems: 10
+ maxItems: 10
+
+ reg-names:
+ items:
+ - const: csiphy0
+ - const: csiphy1
+ - const: csiphy2
+ - const: csiphy3
+ - const: csiphy4
+ - const: csiphy5
+ - const: vfe0
+ - const: vfe1
+ - const: vfe_lite0
+ - const: vfe_lite1
+
+required:
+ - clock-names
+ - clocks
+ - compatible
+ - interrupt-names
+ - interrupts
+ - iommus
+ - power-domains
+ - reg
+ - reg-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,camcc-sm8250.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ camss: camss@ac6a000 {
+ compatible = "qcom,sm8250-camss";
+
+ reg = <0 0xac6a000 0 0x2000>,
+ <0 0xac6c000 0 0x2000>,
+ <0 0xac6e000 0 0x1000>,
+ <0 0xac70000 0 0x1000>,
+ <0 0xac72000 0 0x1000>,
+ <0 0xac74000 0 0x1000>,
+ <0 0xacb4000 0 0xd000>,
+ <0 0xacc3000 0 0xd000>,
+ <0 0xacd9000 0 0x2200>,
+ <0 0xacdb200 0 0x2200>;
+ reg-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "vfe0",
+ "vfe1",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ interrupts = <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "vfe0",
+ "vfe1",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ power-domains = <&camcc IFE_0_GDSC>,
+ <&camcc IFE_1_GDSC>,
+ <&camcc TITAN_TOP_GDSC>;
+
+ clocks = <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY3_CLK>,
+ <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY4_CLK>,
+ <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY5_CLK>,
+ <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+ <&camcc CAM_CC_IFE_0_AHB_CLK>,
+ <&camcc CAM_CC_IFE_0_AXI_CLK>,
+ <&camcc CAM_CC_IFE_0_CLK>,
+ <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_0_CSID_CLK>,
+ <&camcc CAM_CC_IFE_0_AREG_CLK>,
+ <&camcc CAM_CC_IFE_1_AHB_CLK>,
+ <&camcc CAM_CC_IFE_1_AXI_CLK>,
+ <&camcc CAM_CC_IFE_1_CLK>,
+ <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_1_CSID_CLK>,
+ <&camcc CAM_CC_IFE_1_AREG_CLK>,
+ <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_AXI_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+
+ clock-names = "cam_hf_axi",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy4",
+ "csiphy4_timer",
+ "csiphy5",
+ "csiphy5_timer",
+ "vfe0_ahb",
+ "vfe0_axi",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe0_csid",
+ "vfe0_areg",
+ "vfe1_ahb",
+ "vfe1_axi",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe1_csid",
+ "vfe1_areg",
+ "vfe_lite_ahb",
+ "vfe_lite_axi",
+ "vfe_lite",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_csid";
+
+ iommus = <&apps_smmu 0x800 0x400>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
--
2.26.1
next prev parent reply other threads:[~2021-05-11 18:09 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-11 18:07 [PATCH 00/17] CAMSS: SM8250 support (and some fixes) Jonathan Marek
2021-05-11 18:07 ` [PATCH 01/17] media: camss: csiphy-3ph: don't print HW version as an error Jonathan Marek
2021-05-19 10:16 ` Robert Foss
2021-05-11 18:07 ` [PATCH 02/17] media: camss: csiphy-3ph: disable interrupts Jonathan Marek
2021-05-19 15:52 ` Robert Foss
2021-05-11 18:07 ` [PATCH 03/17] media: camss: csiphy-3ph: add support for SM8250 CSI DPHY Jonathan Marek
2021-05-19 16:26 ` Robert Foss
2021-05-25 17:19 ` Andrey Konovalov
2021-05-25 17:35 ` Andrey Konovalov
2021-05-11 18:07 ` [PATCH 04/17] media: camss: csid-170: fix non-10bit formats Jonathan Marek
2021-05-20 10:31 ` Robert Foss
2021-05-25 18:15 ` Andrey Konovalov
2021-05-25 18:38 ` Jonathan Marek
2021-05-26 13:59 ` Andrey Konovalov
2021-05-11 18:07 ` [PATCH 05/17] media: camss: csid-170: don't enable unused irqs Jonathan Marek
2021-05-20 10:39 ` Robert Foss
2021-05-11 18:07 ` [PATCH 06/17] media: camss: csid-170: remove stray comment Jonathan Marek
2021-05-20 10:57 ` Robert Foss
2021-05-11 18:07 ` [PATCH 07/17] media: camss: csid-170: support more than one lite vfe Jonathan Marek
2021-05-20 11:54 ` Robert Foss
2021-05-11 18:07 ` [PATCH 08/17] media: camss: csid-170: set the right HALF_CMD when disabled Jonathan Marek
2021-05-20 11:10 ` Robert Foss
2021-05-11 18:07 ` [PATCH 09/17] media: camss: csid: allow csid to work without a regulator Jonathan Marek
2021-05-20 12:14 ` Robert Foss
2021-05-11 18:07 ` [PATCH 10/17] media: camss: remove vdda-csiN from sdm845 resources Jonathan Marek
2021-05-31 11:02 ` Robert Foss
2021-05-11 18:07 ` [PATCH 11/17] media: camss: fix VFE irq name Jonathan Marek
2021-05-31 11:03 ` Robert Foss
2021-05-11 18:07 ` [PATCH 12/17] media: camss: vfe-170: clean up some dead code Jonathan Marek
2021-05-31 11:11 ` Robert Foss
2021-05-11 18:07 ` [PATCH 13/17] media: camss: vfe-170: fix "VFE halt timeout" error Jonathan Marek
2021-05-31 11:13 ` Robert Foss
2021-05-11 18:07 ` [PATCH 14/17] media: camss: Add initial support for VFE hardware version Titan 480 Jonathan Marek
2021-05-31 12:13 ` Robert Foss
2021-06-08 23:08 ` Jonathan Marek
2021-06-09 15:06 ` Robert Foss
2021-05-11 18:07 ` [PATCH 15/17] media: camss: add support for V4L2_PIX_FMT_GREY for sdm845 HW Jonathan Marek
2021-05-31 12:14 ` Robert Foss
2021-05-11 18:07 ` [PATCH 16/17] media: camss: add support for SM8250 camss Jonathan Marek
2021-05-31 16:07 ` Robert Foss
2021-05-11 18:07 ` Jonathan Marek [this message]
2021-05-12 18:35 ` [PATCH 17/17] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding Rob Herring
2021-06-08 22:34 [PATCH 00/17] CAMSS: SM8250 support (and some fixes) Jonathan Marek
2021-06-08 22:35 ` [PATCH 17/17] media: dt-bindings: media: camss: Add qcom,sm8250-camss binding Jonathan Marek
2021-06-09 16:16 ` Rob Herring
2021-06-09 22:10 ` Rob Herring
2021-06-09 22:32 ` Jonathan Marek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210511180728.23781-18-jonathan@marek.ca \
--to=jonathan@marek.ca \
--cc=agross@kernel.org \
--cc=andrey.konovalov@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robert.foss@linaro.org \
--cc=robh+dt@kernel.org \
--cc=todor.too@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).