linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Matthias Kaehlcke <mka@chromium.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Alan Stern <stern@rowland.harvard.edu>,
	Rob Herring <robh+dt@kernel.org>,
	Frank Rowand <frowand.list@gmail.com>
Cc: Michal Simek <michal.simek@xilinx.com>,
	devicetree@vger.kernel.org,
	Douglas Anderson <dianders@chromium.org>,
	linux-usb@vger.kernel.org, Peter Chen <peter.chen@kernel.org>,
	linux-kernel@vger.kernel.org, Stephen Boyd <swboyd@chromium.org>,
	Ravi Chandra Sadineni <ravisadineni@chromium.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Bastien Nocera <hadess@hadess.net>,
	Matthias Kaehlcke <mka@chromium.org>,
	Al Cooper <alcooperx@gmail.com>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Christian Lamparter <chunkeey@googlemail.com>,
	Colin Ian King <colin.king@canonical.com>,
	Dmitry Osipenko <digetx@gmail.com>,
	Fabio Estevam <festevam@gmail.com>,
	Masahiro Yamada <masahiroy@kernel.org>,
	Mathias Nyman <mathias.nyman@intel.com>,
	Vinod Koul <vkoul@kernel.org>
Subject: [PATCH v10 4/5] usb: host: xhci-plat: Create platform device for onboard hubs in probe()
Date: Tue, 11 May 2021 15:52:22 -0700	[thread overview]
Message-ID: <20210511155152.v10.4.I7a3a7d9d2126c34079b1cab87aa0b2ec3030f9b7@changeid> (raw)
In-Reply-To: <20210511225223.550762-1-mka@chromium.org>

Check during probe() if a hub supported by the onboard_usb_hub
driver is connected to the controller. If such a hub is found
create the corresponding platform device. This requires the
device tree to have a node for the hub with its vendor and
product id (which is not common for USB devices). Further the
platform device is only created when CONFIG_USB_ONBOARD_HUB=y/m.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---

Changes in v10:
- none

Changes in v9:
- added dependency on USB_ONBOARD_HUB (or !!USB_ONBOARD_HUB) to
  USB_XHCI_PLATFORM

Changes in v8:
- none

Changes in v7:
- none

Changes in v6:
- none

Changes in v5:
- patch added to the series

 drivers/usb/host/Kconfig     |  1 +
 drivers/usb/host/xhci-plat.c | 16 ++++++++++++++++
 include/linux/usb/hcd.h      |  2 ++
 3 files changed, 19 insertions(+)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index b94f2a070c05..da50496787fe 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -54,6 +54,7 @@ config USB_XHCI_PCI_RENESAS
 config USB_XHCI_PLATFORM
 	tristate "Generic xHCI driver for a platform device"
 	select USB_XHCI_RCAR if ARCH_RENESAS
+	depends on USB_ONBOARD_HUB || !USB_ONBOARD_HUB
 	help
 	  Adds an xHCI host driver for a generic platform device, which
 	  provides a memory space and an irq.
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index c1edcc9b13ce..9c0fb7e8df1f 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -15,6 +15,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/usb/onboard_hub.h>
 #include <linux/usb/phy.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
@@ -195,6 +196,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	int			ret;
 	int			irq;
 	struct xhci_plat_priv	*priv = NULL;
+	struct device_node	*np;
 
 
 	if (usb_disabled())
@@ -374,6 +376,17 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	 */
 	pm_runtime_forbid(&pdev->dev);
 
+	np = usb_of_get_device_node(hcd->self.root_hub, hcd->self.busnum);
+	if (np && of_is_onboard_usb_hub(np)) {
+		struct platform_device *pdev;
+
+		pdev = of_platform_device_create(np, NULL, NULL);
+		if (pdev)
+			hcd->onboard_hub_dev = &pdev->dev;
+		else
+			xhci_warn(xhci, "failed to create onboard hub platform device\n");
+	}
+
 	return 0;
 
 
@@ -420,6 +433,9 @@ static int xhci_plat_remove(struct platform_device *dev)
 	usb_remove_hcd(hcd);
 	usb_put_hcd(shared_hcd);
 
+	if (hcd->onboard_hub_dev)
+		of_platform_device_destroy(hcd->onboard_hub_dev, NULL);
+
 	clk_disable_unprepare(clk);
 	clk_disable_unprepare(reg_clk);
 	usb_put_hcd(hcd);
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 96281cd50ff6..d02a508e19b0 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -225,6 +225,8 @@ struct usb_hcd {
 	 * (ohci 32, uhci 1024, ehci 256/512/1024).
 	 */
 
+	struct device *onboard_hub_dev;
+
 	/* The HC driver's private data is stored at the end of
 	 * this structure.
 	 */
-- 
2.31.1.607.g51e8a6a459-goog


  parent reply	other threads:[~2021-05-11 22:52 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-11 22:52 [PATCH v10 0/5] USB: misc: Add onboard_usb_hub driver Matthias Kaehlcke
2021-05-11 22:52 ` [PATCH v10 1/5] dt-bindings: usb: Add binding for Realtek RTS5411 hub controller Matthias Kaehlcke
2021-05-11 22:52 ` [PATCH v10 2/5] USB: misc: Add onboard_usb_hub driver Matthias Kaehlcke
2021-05-18 17:05   ` Matthias Kaehlcke
2021-05-18 19:45     ` Alan Stern
2021-05-18 21:40       ` Matthias Kaehlcke
2021-05-19  5:06         ` Greg Kroah-Hartman
2021-05-19 14:43         ` Alan Stern
2021-05-19 23:07           ` Matthias Kaehlcke
2021-05-20  2:05             ` Alan Stern
2021-05-20 13:41               ` Matthias Kaehlcke
2021-05-20 21:14                 ` Matthias Kaehlcke
2021-05-21  1:14                   ` Alan Stern
2021-05-25 17:20                     ` Matthias Kaehlcke
2021-05-11 22:52 ` [PATCH v10 3/5] of/platform: Add stubs for of_platform_device_create/destroy() Matthias Kaehlcke
2021-05-11 22:52 ` Matthias Kaehlcke [this message]
2021-05-11 22:52 ` [PATCH v10 5/5] arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub Matthias Kaehlcke
2021-05-12  7:19 ` [PATCH v10 0/5] USB: misc: Add onboard_usb_hub driver Alexander Dahl
2021-05-12 16:37   ` Matthias Kaehlcke
2021-05-21 12:30 ` Greg Kroah-Hartman
2021-05-25 17:42   ` Matthias Kaehlcke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210511155152.v10.4.I7a3a7d9d2126c34079b1cab87aa0b2ec3030f9b7@changeid \
    --to=mka@chromium.org \
    --cc=alcooperx@gmail.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=chunkeey@googlemail.com \
    --cc=colin.king@canonical.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=digetx@gmail.com \
    --cc=festevam@gmail.com \
    --cc=frowand.list@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hadess@hadess.net \
    --cc=krzk@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=masahiroy@kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=michal.simek@xilinx.com \
    --cc=peter.chen@kernel.org \
    --cc=ravisadineni@chromium.org \
    --cc=robh+dt@kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=swboyd@chromium.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).